DRAGON (assistive Technology) Tool And Update Panels?
Oct 5, 2010
Our web application currently uses a Master Page and each individual web page has at least one update panel. Then each control has its own javascript to focus back on it after a page refresh. Now the problem I am running into is the the listed AT tool is not being refreshed to see the appropriate controls unless the "Skip navigation" link (which points to the content of the page via "#Content") is selected. Are there any suggestions on how to get the skip navigation link executed automatically? Or even any suggestions on how to tackle this problem? Our group cannot write this off as a work around nor as a vendor problem.
i am going to develop an EHR (Electronic Health Record System) i am new to this field and want to discuss what tool technology i have to use for this purpose:
here is my research about EHR and available tools for it
1) i am going to discuss about java as an EHR is a web based system so J2EE will be the solution for java at core level and as i am going to globalize my system so i need some standard protocol for it the most useful and one is HL7 CDA 2.0 one thing about java i like is it provides JAVA CAPS with full implementation of HL7 protocol. it make my work bit easy the second thing about java is it is very efficient for DATA CENTERED application as mine one is but the problem is with the scalability of system that is much expensive and time taking. and java is bit slower on client side that can effect downtime that should me very less approaching to zero for my system. and at last i need a attractive user interface. and the most wanted thing is privacy and security.
2) the other option is PHP for doing all as above described it is less expensive and less time taking for scalability,may contribute to achieve a good interface and a faster client side but question mark on data centric environment and security.
3) the last one is the MS's ASP.NET no doubt about security and privacy but very much expensive to develop and maintain and no platform independence and what about speed that is response and down times?
i have discussed the possibilities upto my best knowledge hope u people advise me which one will be the best to attain privacy, security, speed and scalability on best cost.
I've got a single table, with project information and schedule information. To make the data easier to present, I created a tab control with two panels (a detailsview in each). The first tab is for project info, the second tab is for schedule info (again, all fields in the same table). The problem is, if i change info in both tabs, and then hit the update button, only the data from one tab is added to the table. I think this problem is simple to fix, and boils down to the way I have the page organized, but I can't quite figure it out.
I've boiled my code down to the following conceptualized structure:
[code]....
When you click the update button, you return to the listview, but with only the information from your current tab saved. How can I get it to update from both detailsviews?
i have 4 update panels, and 1 of them updates after a button has been clicked, and the other 3 panels contain other buttons, but what i would like to do is that, when the button is clicked, how would i make it ONLY trigger for that update panel, as it updates the whole page, and is affecting my Textbox on the page, which is also in an update panel. how i could make just that specific panel update, and not all of them?
Is it possible to use an UpdatePanel that has like a few text boxes, and a search button, and then perhaps another UpdatePanel that has a gridview in it to return the results of what was searched. When the user clicks search it hides the boxes, and displays the gridview. Can I do this with UpdatePanels? I am using c# for my coding. Or should I be doing this another way?
I'm having some issues with showing a sea dragon image in a modal popup, does anyone know of any examples or tutorials of these two controls working in conjunction?
As far as I understand UpdatePanels, they should be invalidated separately, i.e. triggerring one UpdatePanel should not touch the controls of the other panel. It does work so for controls outside of any UpdatePanels, however those which are inside ANY UpdatePanel are touched by triggering ANY UpdatePanel:
i have the below page and i am racking my brain as to why when i have two update panels do they both get post backs. i can tell cause i have two user controls- one in each panel and they both fire page load events when only the left panel should be posing back and updating itself... or else whats the point of update panels if in reality the entire page is posting back!
so I got the following page - student listed with 6 buttons to indicate a lunch choice. Clicking the button will update the DB immediately - so a postback happens and lots of screen flicker.
Where do I put update panels in this messy repeater in order to make just a row "redraw"? I broke the code into two parts so you can see the StudentRepeater in the second code window.Also - note that the lunch counts in the labels on the left will also update from the DB. Does that go in it's own update panel?
I'm looking for a way to use custom ASP.NET validators to validate input, without using UpdatePanels, and without a full postback. The validators do several things - not just length/regex, but some other non-standard stuff as well. Javascript is required for our users, so I don't have to worry about normal users who have javascript turned off. I see several options, but none are ideal:
1) Suck it up and use UpdatePanels. I'm in the "UpdatePanels are evil" group, so I'd prefer not to do this.
2) Without using validation controls, manually validate the fields by passing the values to a PageMethod static method, via jQuery or any other AJAX framework. This would require client and server coding each time I needed to use a validator.
3) Use jQuery (or any other javascript framework) validation for client validation, then if they somehow get by that, have server-code validation controls for full postback. This would require all of the validation rules to be written in javascript as well as C#. I don't care about the full failed postback at this point, because the javascript validation would catch real users who weren't trying to screw me over.
Is there alternative out there for using real CustomValidator controls, with partial postback, C# code only, for validating input without UpdatePanels and without a lot of redundant javascript?
I have a page with 5 buttons on top. I want the area below the buttons to contain an update panel that will display button 1's panel if they click button 1. If they click on Button 2, then I want button 2's update panel to replace the button 1 update panel. Each panel has stuff on it like check boxes and text boxes.
Is there a way to do this? Is there a more efficient way to do this?
i have 3 update panels on the same page with labels that are showing different countdown and i want then to run separate from each other. I've tried to use timer control that triggers each of them separatley with limitations in ontick event., the coutdowns are strating but after a few seconds are stoping and i don't know why.i'm not using scripts. I want to run like those on mafia wars on Facebook when something is done to start one contdown and something else other timer.
My issues here is that this does not compile. I get "A control with ID 'LinkButtonRemove' could not be found for the trigger in UpdatePanel 'UpdatePanelFiles'." What I am trying to do is have two buttons in the item template. One that updates just the ITEM and one that updates the entire DataList. "LinkButtonRemove" is what I want to update the entire datalist. Any ideas on why this isnt working? Or how to do what I want to do?
THE SHORT VERSION: UPDATEPANEL1 -DATALIST --ITEM ---UPDATEPANEL2 ----CONTROLS
I want one control to update the item updatepanel only and the other to update the entire datalist.
I realise that there are many posts on update panels and repeaters but none that quite solve my problem. I have a page with two Repeaters each inside seperate update panels. They sit next to each other one on the left and one on the right. The left repeater is filled from my database on my page load event. Im am storing the data in a List<> and then binding the list to the repeater. This works correctly and displays all my results. Each item in the left repeat has a button aswell. The button needs toremove the data from the left repeater and place it in the right repeater. I only want the database to be accessed in the Page_Load and then never again during the use of the page, until the data is saved (I have not got to this feature yet). So I have decided to use List<> objects.
I'm using two update panels, and in the Page_Load, I'm calling if (masterPageScriptManager.IsInAsyncPostBack).Is there a way to test where the update came from and only refresh the affected panel?
I have a page that display a record set inside an update panel. There are also a handfull of checkboxes/textboxes that allow filters to be placed. Each checkbox/textbox is set as an async trigger for the update panel and set to autopostback.
If a single checkbox is clicked the whole filter/render process takes roughly 1.5s.
If I check a filter and then several more before the intial postback is complete I get a postback time of somewhere between 20-50s depending how many boxes I've clicked.
I notice (via firebug) when I check a box that triggers an async postback and than another box the original async post back is aborted. And yet it seems like it still executes (or maybe locks?) something on the server.
I have multiple update panels on a page. The page works perfectly in Chrome, Firefox, safari, and opera but it does not work in IE. I am using .NET 4.0.
Suddenly all update panels in my website became unknown elements. They work fine when I run site.
But:
no intellisense in update panel (no properties appear, no tags, like "triggers") no ID property when I drag updatepanel from toolbox VS says that I check if webconfig contains reference to System.Web.Extensions
i have created an user control with a text box and a list control inside ajax update panel to create a control like the google search text box which floods the values as the user types in.
its working fine too...now whats my problem is that when i am trying to use two user controls that i created in the same page. when i am running the page am able to use only the second user control. when i start typing in the first control the focus control is getting passed to the second one automatically and i am not able to type in anything in the first control.
what can be the reason? am using only one script manager for both. the update panel is inside the usercontrol.
Anyone know of a way to read out in a list all of the UpdatePanel Client ID's I have on a page? Basically I need to loop through all controls in the page with a type of UpdatePanel, and display the ClientID for each..
I have four update panels on this page and I am using this
private string LoopUpdatePanel(ControlCollection controlCollection) { StringBuilder sb = new StringBuilder(); foreach (Control control in controlCollection) {
I have a Gridview containing 10 columns and anywhere from 10 to 40 rows and each cell contains either dropdown or input boxes.I also have a calendar control that changes the data displayed in the gridview.Right now I have an outer update panel around the entire gridview and then I have inner update panels around each control, so potentially 400 update panels depending on the amount of rows for each day.The individual control updates happen fairly quickly if I for example change a dropdown etc, but when I change the day and the entire gridview has to refresh it is painfully slow.On average 30-50% of the cells will be manipulated between change of date. What is best practise? Right now it is to slow.
I have two different repeater control which are in two different Update panel.I want to bind one Repeater value with another.But When i am using asyncPostBackTrigger or postbacktrigger it is reloading whole page.
I'm trying to create multiple update panels to add to an accordion pane with timers with a _tick event to update the respective update panel on the page_load event.
