DataSource Controls :: Searching For Records Using A Date Value In Textbox?
Nov 3, 2010
I have two pages, the first is datepicker.aspx and it contains a textbox where I enter in a date in YYYY-MM-DD format and a button that performs a postback to results.aspx. Results.aspx has a gridview where I'd like to see records from the journal table in my SQL database that have the date I entered back in datepicker.aspx only the gridview never produces results.I'm using the following query in the datasource, if I test it in the datasource wizard it works and it also works when I run it directly against the database.
SELECT * FROM QM.Journal WHERE ([DateEntered] = @SelectedDate)
The @SelectedDate is setup as a FORM parameter in my datasource. Is there anything in particular that I need to do to the results.aspx page so that it grabs the date I put into my datepicker.aspx textbox?
I have few textboxes and I want to search the text (partial search is also required) in the database and then show the result in a telerik grid. The grid has to be hidden initially and when I click the search button it should show up and display the results.
I'm trying to query records from a db using a date. But somehow the db doesn't return records.
The datetime collums have the data stored in this format in the db as datetime :
12-Apr-10 12:45:12 AM The string a have available is in this format : 12-Apr-10
I need to somehow strip the time part of so i can use my date string in the query.
When i use the below method the database converts the datetime to a rounded date (12-Apr-10 12:00:00 AM). But when i query for that date i still get no results.
I tried this:
SELECT ID, PerformedBy, SystemId, ServerId, CAST(FLOOR(CAST(CreateDateTime AS FLOAT)) AS DATETIME) AS Expr1, Reason, Action, Summary, EnteredBy, Collumn1, Collumn2 FROM Changes WHERE ('Expr1 = '12-Apr-10 12:00:00 AM')
I have a stored procedure which must be provided with a requested FROM date and TO date. If a given FROM date and TO date is in between any record set available in the table, it must return an error. For example, According to above table, there is a request FROM 01/01/2010 TO 10/01/2010, and If the user enters 06/01/2010 as FROM date [Requested FROM date is already in between the Record ID 01 - FROM date and TO Date] , thus, it must display an error, or print a message.
I have a webform that uses a gridview to display a list of records from a table. I also have a search box that allows the users to input their search text and next to it a Find button which will take whatever that is in the search box and match it against each record in the datbase using a simple select query.
Whenever this search is executed it takes up to 20 seconds to display the returned result in the grid. The search query uses the SQl Data connector class through SQL ADO.NET.
However, when I perform the same query in the SQL management studio the search takes a total of 2 seconds. I'm wondering why there is a big difference in timing. I know that the query searches the table of about 4,000 records. I read up on paging but I am new to this concept.
I want to select data from a table where the user can search by 3 options; date, keyword, and type. The date will always be either today or a user chosen date. The keyword can be null or something the user inputs. The type will be chosen from a drop down and can be all or a specific category. I know how to search the date, but the other two create complications. I have created a stored procedure trying to figure this out:
[Code]....
Is there a way to say if the keyword is null then don't use it as a search criteria. If that is possible then type can use that same logic I suppose.
I have a table that contain special characters and when the user search for nguyen I want to return string that contain Nguyễn or nguyen or any other nguyen variations.
I have absolutely no idea where to start and will be greateful if someone know any article that explain how I can do this.
I want to make data-driven page and ability to filter data on some parameters, for example 3 text boxes and 2 dropdown lists and then show the results by the grid view control.
Actually I like input data in the text boxes and select item from dropdown list and then press "OK" Button and result (filtered data) show in the new page by the grid view.
What I have seen in the quick start tutorial is filtering by one parameter.
it is apparent that "string builder" is better for building large string compared to sMyString = sMyString + "something";
what is a better way to search large in memory datasets? (like the example above - i know i could use loops, is there another way that i dont now about?)
in my asp.net_vb code web. there are 9 textboxes whcih is used for entering numerical/dates
first is lve.text in whicj numder is entered
second one is lvefrom.text
thirdone is lveto.text
when user fills (lve.text) 5 and enter 15 Jan 2013 in lvefrom.text then lveto.text should show 19 Jan 2013. i had posted this earlier and got reply which is mentioned below. this code below gives me 20 Jan 2013 instead of 19 Jan 2013.
tw text boxes lve.text (number filled) and lve from.text (date filled). when user enter a numder in lve.text and select a date fro date picker in lvefrom.text then lveto.text should show date selected in lvefrom.text + number of days in lveto.text (eg if number of days is 5 and date selected in lvefrom.text is 15 Jan 2013 then lveto.text should display 19 jan 2013. because the starting day is also counted in my case.
Protected Sub lvefrom_TextChanged1(ByVal sender As Object, ByVal e As System.EventArgs) Handles lvefrom.TextChanged Dim ObjLocDate As New Date Dim IntLocDays As Integer IntLocDays = Convert.ToInt32(lve.Text) ObjLocDate = lvefrom.Text ObjLocDate = ObjLocDate.AddDays(IntLocDays) lveto.Text = ObjLocDate.Date.ToString("dd-MMM-yyyy") End Sub
fourt tex box is pfx.text, fifth is pfx1.text, sixth is pfx2.text
when use filles pfx.text 3 then pfx1.text should display 12 Jan 2013 and pfx2.text should display 14 Jan 2013. these are the prefix for leave( as 12 to 14 Jan 2013 is prefix.seveth is sfx.text, eighth is sfx1.text and nineth is sfx2.text
when user fills sfx.text 3 then sfx1.text should display 20 Jan 2013 and sfx2.text should display.
I am having a little trouble in working out the best way in which to query my database. What i am looking to do is to search a using a textbox, the problem is that there is not only one field or one table I want to search for. For instance I have a table of parts that contains the part number, part name, the associated project number, searching for these would be relatively straight forward, I also want to be able to search based on the project name (this is stored in a seperate table) I have thought about using a drop box to allow the user to specify which column they want to search in however this didnt work very well. Ideally i will be able to add more search functions onto this after.
I am filtering dataview using my Date Column but the result is not proper because the Field value also stores time, so I want to convert this Date Field to only Date during Filter. How can I achieve this? Here is my code. And the actual value I am getting in the Dataset Field "CreationDate" is a DateTime field which is like
I have some issues about retrieveing and storing date information to my database (ms sql server 2005).My data column is a DateTime, and i have set my web.config globalization culture is set to "en-gb"
When i retrieve date from the datebase it appears as dd/MM/yy, that's fine. But i cannot insert a new date as same format?! It will only accept MM/dd/yy or yy/mm/dd.Right now i'm using this code to correct the error:
[Code]....
Is it possible to change the date format on the database or something, so i dont need to use this code?
i have a radiobutton list and i want the select statement of a SqlDataSource to change according to which radiobutton is selected. My code is as follows
[Code]....
It is giving me the following error when i put jon in the Text Box provided for searching Incorrect syntax near 'kae'. Incorrect syntax near 'Jon'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'jon''.Source Error:
[Code]....
Line 29: query = query + "WHERE ([Ufname] LIKE '%'" + txtSrch.Text + "'%')"; Line 30: SqlDataSource1.SelectCommand = query; Line 31: SqlDataSource1.Select(DataSourceSelectArguments.Empty); Line 32: } Line 33:
i have a tablewhere datas are inserted and there is a colum foor inserting date on which data are inserted , so thatcolumn has datatype datetime and in design i have teo textbox one takes value for from date and the other for to date. on submit button click i want to display the datas between two dates. so i converted textbox value to datetime and it is showing data but the problem is suppose i inserted data on 29/04/2014 .now i want to view data inserted between 28/04/2014 and 29/04/2014 it doe not show any data but when i check between 29/--/-- and 30/--/-- i t display the data
have a textbox to get the customer name , and i need to get the name from a dialog modal that have a grid that i can search from costumer table the line that i need... And can pass to my text box only the name of the costumer.
I'd like to use the jquery calendar control to populate a date into an asp.net textbox.
When the user selects a date I want the date populated in the textbox to be only Saturday dates. So if the day they select is not a Saturday I want the date of the next Saturday after the date the selected.
I am having one form in which payment mode have 2 radiobuttons cash and cheque when cash is there cheque panel remains in visible and when cheque is clicked panel opens in that there is cheuqe no,date and bank name.
my problem is that when i store cash data the cheque date by default stores date 1-jan-1900
can i add new records in gridview by entering value in textbox in runtime?suppose a value is entered in textbox and concerned record is displayed in gridview again if i want to add a new record in gridview along with the old record how can i add?
I am developing a message pool means like a Facebook when we click on above message icon all message show in list .then click on the sender name all message show that person. For
That kind of message poll am developed two pages one page is sender and the other one is receiver .when I send message from sender page it will be saved into data base and show into other pages text box.
Now problem is that the receiver pages cannot show all messages .it will show one first message which are saved into database.
I want it will show all messages which are sending from sender page. below my all code.
WebForm1.aspx.css using System; using System.Collections.Generic; using System.Linq;
