with query parameters in ASP.NET. For example, if I have query:
[Code]....
for parameter @id I intend to use combobox. Everything is just fine with this example, problem begins when I try to use IN clause.What I need is query like this:
[Code]....
[Code]....
1. I have a GridView on my page and it uses sqldatasource with parameterized query. What I want to do is, on page load (where nothing has been selected so no parameter supplied), I want it to query everything (something like SELECT * FROM [this_table]) but since my SelectCommand is something like
SELECT * FROM [this_table] WHERE [this_column] = @someParameters AND [that_column] = @someParameters.
Can I play around with default value to achieve something like that but how ? Now, when the page loads, it doesn't show anything (No Gridview).
2. On my page, I made something like (username, gender, address, and more) and one single search button. That means, no single control enable auto postback. What I am trying to accomplish is building dynamic query
(if username specifed -> SELECT * FROM [this_table] WHERE [username] LIKE @username).
If both username and gender are specified (SELECT * FROM [this_table] WHERE [username] LIKE @username AND [gender] = @gender) and you know the rest. How can I do this using GridView and SqlDataSource ? To my knowledge, I can only specify one SELECT statement in a sqldatasource.
here is my code for selectiong some records from db table
string strSql = "select * from mtblNBD where SentTo=@SentTo and InternalStatus Is NULL order by DeadLine desc";
SqlCommand com = new SqlCommand(strSql, con);
com.Parameters.Add("@SentTo", SqlDbType.NVarChar, 50).Value = (string)Session["uname"];
here I am using parameters for SenTo field but not for NULL so it is ok... or should I use parameters for this field where value is NULL , if yes then how can I use parameter for this
here is my query which is not working properly. I have 5 fields in my table Company, Reseller, Item, Code, Price. How can i get minimum Price when i pass parameters for Code is dublication value
Company Reseller Item Code Price
A A-1 I1 C1 20
B A-21 I2 C2 13
C A-B I1 C1 19
select Company,Reseller,Item,Code,Min(Price) from Table1 where code='C1' order by Code HOW CAN I GET THIS BELOW TYPE OF RESULT
Company Reseller Item Code Price
A A-1 I1 C1 20
C A-B I1 C1 19
I have SqlDataSource with a few parameters (code below). If I understand this code correctly if parameter is NULL I should receive all items from the query. It works fine with query editor. But when I try to use this query on my page - with DropDownList and Textbox controls as source of parameters - it doesn't work. I suspect that main reason of problem is value which these controls pass to the query. Instead of NULL this is an empty string. Is it possible to pass NULL value from DropDownList or TextBox to
the SqlDataSource?
[Code]....
[Code]....
[code]...
This query works perfectly on the query analyser.
But when configuring the Table adapter ,I try executing the query and i get 0 rows affected.
What could I be getting wrong in this case.
NB:Existing GalleryID has been supplied.
By right clicking on my database i created a query in server explorer. But where are this query stored can't find them back. I should aspect that their is a folder query's like there is a folder tables but this isn't the case.
View 10 RepliesI have a data grid with a lot of information on it - to easily filter the data, I would like to be able to pass parameters to it. My problem is that I do not want the parameters to be required. So if I just put 1 or 2 of them in the query string, I would like for it to return all of the data related to those two parameters.I am using a data grid & stored procedures:My Stored Procedure looks like this:
[Code]...
select Groupid,GroupName,onorusername from palgroup where groupid in (select distinct Groupid
View 5 RepliesI've got a query such as
Dim MediaQuery =
From m
In dB.DOWNLOADS _Where m.ID = id _Select
which returns a record from the database. One of the fields in the record is a FK to another table. I need to read this value to be able to set a dropdown based on the ID but I can't work out how to access it. For a standard record I can just do the following txtTitle.Text = MediaQuery.FirstOrDefault().TITLE
However with the foreign key it doesn't work like that. I've tried drpGroup.SelectedIndex = MediaQuery.FirstOrDefault().DOWNLOAD_GROUPS.ID where DOWNLOAD_GROUPS is the FK field but it returns Object reference not set to an instance of an object. If you're simply wanting to read some values from a single db record in the entitiy framework and one is a foreign key how should I go about getting the value?
How could I add parameters on dataadapter? I tried
[Code]....
But parameters is unknown for dataadapter.
I have asked similiar question before where I have two control on the page header says "username" and "gender". User can select both the control or either one and the page will execute searching based on the criteria supplied. So if username supplied
SELECT * FROM [this_table] WHERE username = @username
and if gender supplied
SELECT * FROM [this_table] WHERE gender = @gender
and if both supplied
SELECT * FROM [this_table] WHERE username = @username AND gender = @gender
I know this sounds not very complicated but in my case, I am having like more than 10 controls up there. It is something likeusername, gender, age, date of brith, title, father name, frst name, last name, blur blur blur and it's a lot then I started to lost. if i were to use if else caluse on code-behind and produce query, it would end up writing a lot of if-else and if i use stored procedure (with if-else) then my stored procedure would contains a lot of if-else statement. I am fairly new to this concept and if I'm on the wrong track, please correct me. Is there any better way to save my hair without actually going through each
if-else statement to build the query ?p.s. I'm using GridView and SqlDataSource command to display the result back on .aspx page.
I have webform with a listview control on it that uses 2 date values supplied by the user (via 2 text boxes) to dynamically set date range parameters for the datasource. The user enters two dates and clicks a button that runs the following code that sets the parameters:
[Code]....
This code works the first time the user clicks the button. But if they change the date values and try again, it only returns the result set from the first request. The parameters are not updated to the new values supplied by the user.
I am trying to check whether a username exists in my database before inserting the new row & display a message to the user if it does.
On my SqlDataSource my InsertCommand looks like this:
InsertCommand="IF NOT EXISTS (SELECT * FROM Users WHERE UserName = @UserName) BEGIN INSERT [Users] ([UserName], [FirstName], [LastName], [City], [State], [Country], [CompanyName], [Active], [PasswordHash]) VALUES (@UserName, @FirstName, @LastName, @City,
@State, @Country, @CompanyName, @Active, @PasswordHash) END"
This works as expected: If the username is unique, the row is created.
If the username already exists, the row is not added.
The problem is, if the row already exists, the insert is rejected but the user is not notified.
So my question is, is there a way I can notify the user?
Maybe something like: InsertCommand = "If Not Exists (select....) Begin Insert...Else Notify User Somehow End This is a basic database, I'm not using the built-in membership provider nor will be.
I'm linking a form to sql database, As far as i know for textbox the code will be like this one below in VB:
dashDataSource.InsertParameters.Add("databaseColumName", NameOFTextBox.Text)
But what is the code for a drop down menu for countries list?
I can't see what I've missed
Dim strSQL As String = _
"UPDATE [emailText] SET " & _
"[stdSubjectLine] = @subjLine, [stdBodyText] = @bodyText, " & _
[code]...
I followd Brian Orrell LINQ tutorial for paging/sorting and created a gridview bound to an ObjectDataSource through a method call which gets data from adatabase. My form includes two buttons with a textbox next to each one of them. I need to be able to populatte th egridview depending on the button that was pressed, I cannot figure out how signal my method which button was pressed.
[Code]....
[URL]
I have a ListView that, among other things, in the EditItemTemplate, has a pair of related DropDownList controls, sort of a parent/child relationship. The selected value of the parent is used as a parameter for the SQL Datasource of the child. Outside of a control such as the ListView, this would be easy and I'd simply set up a ControlParameter for the SQL Datasource and life would be good. Within the DataList things are not quite so simple. My plan is to set the parameter of the child in the Selecting handler of its datasource. I have hard coded some values and this works the way I want it to. My problem is getting the "parent" value. I've got two theories on how to get this:
#1, I've tried instantiating the parent DropDownList but it is either not available at this point in the page life cycle or I just don't know the syntax to get at it from within the Selecting handler.
#2, I'm thinking I may have to grab the value from the underlying data for the ListViewRow that I am editing, but again, I do not know the object model well enough to get at those values.
Below is a code sample for option #1. As stated, setting the parameter works, but getting the value of the DropDownList does not.
All control are not listed in dropdown when selecting a control for adding parameter to update query.
View 1 RepliesI need to retrieve data using a date as an input parameter. I created a WhereParameter and passed in a date value that I know to exist in the database, but no data is returned. Heres my code
[Code]....
Ive passed in '02/06/2010' as the date, in the database, the Startdate column has several values of '2010-06-02 13:08:50.503' so I guess its not being found because of the time part. Whats the best way to make sure that I retrieve the correct data ? Im not concerned about the time at all, I just need all rows for 02/06/2010.
getting the Parameters declared in an sql function in the C# code. We can actually get the parameters from a Stored Procedure by giving SqlCommandBuilder.DeriveParameters
Similarly is there any way to get the Parameters from the SQL Function.
Is it possible in SqlDatasource Update command to combine two parameters to make a third?
[Code]....
this is what I need to do Combine First and Last names with a space between.
I'm attempting to use the following parameter value in my data source:
[code]
<asp:Parameter Name="IPAddress" DefaultValue='<%= HttpContext.Current.Request.UserHostAddress %>' />
[/code]
But the string literal "<%= HttpContext.Current.Request.UserHostAddress %>" is being sent to my stored procedure.
http://msdn.microsoft.com/en-us/library/ms178538(VS.80).aspx ?I tried and got error as below, at clicking Update button in detailView
'/CaseExamples' 응용 프로그램에 서버 오류가 있습니다. ==> Server error in application program
ObjectDataSource 'EmployeeDetailsObjectDataSource'에서 매개 변수 (LastName, FirstName, Address, City, Region, PostalCode, original_FirstName, original_LastName, original_Address, original_City, original_Region, original_PostalCode, original_EmployeeID)를 사용하는
네릭이 아닌 UpdateEmployee' 메서드를 찾을 수 없습니다.
This is my first attempt in using table valued parameters in my stored procedures. Please find the scripts down below. The idea is very simple. I'm trying to insert a new product into Products table and if the product has attributes, I'll insert them into ProductAttributes table which is where I use table-values parameters.
I was able to test the stored procedure manually. It's working fine. So the error must be in the C# code but there's not much to it.
Here's the DAL code in C# that calls the stored procedure:
[Code]....
Just in case you need it, here's what my Product object looks like:
[Code]....
And the ProductAttribute object is even simpler:
[Code]....
Here's the SQL scripts to create the tables, stored procedure and user defined table type:
[Code]....