I am reading an integer named "CostIndex" from a database table.I need to cast it to an integer and then pad the result withleading zeroes.So if CostIndex is only one digit then I need to pad it with 3 leading
blanks: 0007I know how to find the length, using LEN,but I don't know what to do beyond that? select CAST(CostIndex AS VARCHAR(4)) from TableRoot
Using vb.net,asp.net 1.1,sql server Sorry about the Subject Line didn't quite know what to put in it. My problem is i'm making an RSS feed and I need to get the last question in my table. I have a SPROC already that I can get any question that I want by questionID Here is a some of the code:
[Code]....
The questionID is Primary 1,1 so what I need to know is do I have to write another SPROC or can I get the highest number row or last row throught the value. For instance,
Dim myLastRow as Integer = What? Then for (ByVal questionID As Integer) I would myLastRow)
i have some problem in passing null value to an integer datatype in sql. Here is my code:-
[Code]....
The if statement within query is where i am having problem!
I am having dataset and I want to validate particular column for Integer(Numeric) value.
e.g.
ErrorRows = dt.Select("LEN(Year) <> 4 ")
Above I have to validate Year column for Numeric value otherwise it should give me erroneous records which have data other than numeric.
How can I change the parameter value from Interger to String.
Here below is the part of the code that creates problem; the constant "sqlStatement" is as string, but when the parameters "@ProdColor" read the value it returns an integer instead of the proper type which is a string. I have tried every ting like: CType(sqlStatement(splitItems(1)), string)
Or convert or parse, but it keeps returning the wrong type.
Const sqlStatement As String = "INSERT INTO ProductDetails (ProdID,ProdColor,ProdSize) VALUES"
If item.Contains(",") Then
splitItems = item.Split(",".ToCharArray)
cmd.Parameters.AddWithValue("@ProdID", SqlDBType.Int).Value = sqlStatement(splitItems(0))
cmd.Parameters.AddWithValue("@ProdColor", SqlDBType.NVarchar).Value = sqlStatement(splitItems(1))
cmd.Parameters.AddWithValue("@ProdSize", SqlDBType.NVarchar).Value = sqlStatement(splitItems(2))
I have a stringvariabel in a form I shall insert in a SQL database in a integer field. I try to convert it in the parameterlist:
myComm.Parameters.Add("@UtstyrID",
SqlDbType.Int).Value =
Convert.ToInt32(e.Record["UtstyrID)"]);
but it only store the value 0 and not the value of the e.Record["UtstyrID)"])
I have int datatype declared in my store proc.
When I try to pass parameter from code behind in sqldatasource as :
SqlDataSource3.SelectParameters.Add(ContactNum",
System.TypeCode.Int32,
"1")
I get error "
Error converting data type nvarchar to int. "
I have a stored procedure which returns me maximum value of a column in the database table i.e. it returns me a single int value.
What syntax of linq to sql can be used in service.svc.cs so that I can use this value in xaml.cs?
I have a textbox that takes an integer value, and a submit button that when clicked passes the value to a detailsview to display the database record at that index.
What I'd like to do is, when the button is clicked, compare the number to the keys in the detailsview's datasource so that if the record ID doesn't exist, I can display a label telling the user that the ID# doesn't exist.
How would I go about doing this? Is there some sort of compare method for the datakeynames property?
The drop down list is used to determine what search criteria will be used to find an invoice. I tried to set the Select method in the switch statement. I don't understand how to set the Select Method and the select parameters programmatically though . I tried a few different ways but can't make the compiler happy. My ODS is in scope in the code behind. I'm not able to access it's properties though. The BAL resides in a separate project that is a ClassLibrary. I also have a using statement for the ClassLibrary project in the code behind.
give me an example of how to do this?
Mark up:
[Code]....
[Code]....
[Code]....
[Code]....
protected void Button19_Click(object sender, EventArgs e)
{
SqlDataSource conn = new SqlDataSource();
conn.ConnectionString = ConfigurationManager.ConnectionStrings["Database2ConnectionString1"].ToString();
conn.SelectCommandType = SqlDataSourceCommandType.Text;
conn.SelectCommand = "SELECT FROM table1 (a, b)VALUES(@a,@b)";
conn.SelectParameters.Add("a",TextBox1.Text);
conn.SelectParameters.Add("b", TextBox2.Text);
int rowsAffected = 0;
try
{
rowsAffected = conn.Selectt();
}
catch (Exception)
{
Label1.Text = "Error";
}
finally {
conn = null;
}
if (rowsAffected != 0)
{
Label1.Text = "Data saved";
}
}
well it returns error no overloading method for select (P.S. same code work fine for insert)
I will declarate a attribute, but it gives me an error
This query works fine and returns 1 record from type int:
SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC
And when I will declarate a attribute/parameter it gives me an error:
DECLARE @dataObjectVersionId INT
SET @dataObjectVersionId = SELECT TOP 1 DataObjectVersionID
FROM tblDataObjectVersionPropertyValueText
WHERE PropValue like CAST('00010281' AS ntext)
ORDER BY DataObjectVersionID DESC
Error message:
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'SELECT'.
I get the error - Conversion from type 'DBNull' to type 'Integer' is not valid. - on the line.....
Dim newid As Integer = e.Command.Parameters("@latestRowId").Value.........in vb code behind.
I have the identical code for another page with the exception of the field names and it works fine. The only thing I did differently, as far as I know, is I copied the asp and code behind from the page that works into this page and manually changed the field and table names. I don't know what the problem is. Does anyone see any problems?
[Code]....
SQL Query with IF and Select
View 2 RepliesI would like to combine two commandtexts into one
text1.CommandText = "SELECT Id, Heading as Head FROM dbo.Modul"
text2.CommandText = "SELECT Id, Caption as Head FROM dbo.Menu"
I want to combine these two into:
text3.CommandText = "SELECT Id, Heading as Head FROM dbo.Modul" + "SELECT Id, Caption as Head FROM dbo.Menu"
The following code is used to get a relation out of the database:
rel_SQL = "select * from Relatie where relatie_soort_nr = '" + rel_srt_nr + "' and relatie_naam like '%" + sel_Waarde.Trim() + "%'";
This code is a problem when you have a relation with ' in his/here name.
rel_SQL = "select * from Relatie where relatie_soort_nr = '1' and relatie_naam like '%L'%'";
As you can see there is one to many ' sign in the code, how can I solve this like problem?
I have a table with number fields, one of which is location. What I want is a select command which put all records for the selected location first then adds all the others on the end in what ever order they occur.
View 1 RepliesIf I run the following SQL script:
[Code]....
i have two tables (Users, Roles) and each user belongs to one role. Can I make a sql query that returns 10 newest users from each role in one query?
View 5 Repliesin DataBase Attendancedate is save in this format 4/5/2010 4:16:28 PM ..i want to query like this select * from EmployeeAttendance where Attendancedate='4/5/2010' but this giv error
View 5 RepliesI want the select statement for the above scenario.
View 2 RepliesHow would you handle an INSERT that gets some values from another table using SELECT, where you wanted some values to come from the source table record and other values to come from a different parameter source like a session value? Is this possible?
View 3 RepliesI need to execute the stored proc accross the parameters resulted from select statement
I have created one stored procedure which require one parameters ( username ) ..
i need to execute this SP accross the Select Statement which lists all the username
somethibng like :
Set @username = (Select usename from my table)
EXEC dbo.Duplicate_Data @username
I have a SQL select statement with inner joins to get a total number of records for the statement. I have tried using count with group by's but it just counts one for each record instead of giving me the total number of records for the query. Here is the query:
[Code]....
If I have a linq statement like:
[Code]....
There may be a lot of data in the Blogs table. What if all I wanted was say BlogID, BlogTitle and BlogAuthor and nothing else, is there a way to do this in an effort to make the sql more efficent?
Along the same lines in my DataContext (.dbml) file I added some associations between some of my tables. This makes coding nice when I do a linq statement that will join those tables automatically for me but my concern is does it do that everytime, thus making all my linq quieries inefficient?