tblUsers (Primary db using conn1)
UserID
FirstName
LastName
Status
tblResponses (Secondary db using conn2)
UserID
ChoiceID
Status
[Code]....
This constraint cannot be enabled as not all values have corresponding parent values.
If I have a SqlDataSource like this one, is it possible to add a DataRelation in the sqldatasource? Or do I need to create a DataSet and add the Relation in CodeBehind?
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:CString %>"
SelectCommand="SELECT * FROM table">
</asp:SqlDataSource>
What is the difference between DataRelation and ForeignKeyConstraint ?
Is a DataRelation generates automaticly a foreignkeyconstraint ?
I have setup and SqlCacheDependency for my site and all is working well, but there is one requirement in my task that I dont' seem to be able to find the workaround for. Currently, my code relies on the following web.config settings to allow the SqlCacheDependency to know where to connect to. it is like this:
<connectionStrings>
<add name="connstring1" connectionString="......" />
</connectionStrings>
<caching>
<sqlCacheDependency enabled="true" pollTime="500">
<databases>
<add name="db1" connectionStringName="connstring1" pollTime="500" />
</databases>
</sqlCacheDependency>
</caching>
The problem is that we can't allow in our application the connectionstring to be on the web.config. I am asked to programmatically do all of that. I don't know how and I don't know if that is even possible, is it?
I would like to create a webform in asp.net that allows you add events to a overall application, anyone then can go search that event by a specific date and if that event falls under that recurrence day you will see it. This would be similar to Outlook where you can say it recurs every Monday, Tuesday, Wednesday,... or every third Monday, ...Specifc day of the month, etc. I have created the webform but now I have the problem of how the database works. I have been reading for the past couple days about this but I cannot figure this out. I found some posts that say you can create a seperate table aside from your main table that holds the eventid and the dates of the recurrenecs. The problem is this table could amount to thousands of lines from just a few events input. My question is, is there a formula out there that can do this without creating a crazy big recurrence table? .... If not, how many lines can a MS SQL database hold before it has performance problems?
Here's a link to another forum I found with my same question but I do not understand the answer:
[URL]
I read on MSDN that Ntext and Image will be removed from future version of SqlServer, but as I check my db the aspnet_Profiles uses ntext and image MSDN says replace them with nvarchar and varbinary
1. I tried to replace these column and got an error
2. When should I replace these datatypes?
3. Will Microsoft put out an update for this particular setup?
am writing a series of WSS/MOSS webparts amongst which one will need to detect the current SQL Server database connection, prompt the user to setup a new connectionstring, and fire appropriate stored procedures to create a new database if needed. The user needs to be presented a textbox or label control with the current database connection. I've never had to detect current database connection, what methods do I call for this? If the desirable connection is not present, the web application needs to prompt the user to make a new database. The user really won't make the database, they simply need to click the command button which will fire the stored procedure to create the database.
View 1 RepliesI created and populated a database inside Visual Studio 2008 instead of using Management Studio.I need to run the script to create the schema for users and roles.The database does not show up in ASP.NET SQL Server Setup Wizard or in Management StudioThe only databases that do show up are master, model, msdb, and tempdb
Is there anything I can do to fix this or would it be easier for me to just create a new database starting in Management Studio and then connect to it from within Visual Studio?
i am an asp.net beginner, i am a windows application programmer and currently i am working on big project " Human Resources" and i need to allow the users to apply for jobs using a web page.in windows application, i can use the bindingsource to bind textboxes and comboboxes to the fields of an object from L2S.and to bind the datagrid also to the detailed data and the page will be for inserting issue only,i.e i don't need to bring the data of applicants and certificates from the database, i just need some lookup data like maritalstatusCombo and availableJobsList things to allow the user to choose from.how can i do this using linqdatasource.
View 3 RepliesI've tried:
[Code]....
I've also tried:
[Code]....
i have textbox in a datagrid template and i want to read each of textbox data and save to database by clicking the button not in a datagrid under the datagrid. what i must to do?
View 6 RepliesI have a datagrid with some data in three datacolumns. I have to apply sorting to two of the datacolumns. Is it possible without any datasource..
View 2 RepliesAm trying to get a working enity model with foreign keys working but have run into a problem. I have imported 3 tables with content and some data.Lets call these tables geo_countries, geo_counties, geo_municipalities and the FK are:1. geo_county have a column country_id wich corresponds to country_id in geo_country 2. geo_municipality have a column county_id wich correspond to the county_id in geo_county.The problem i have is when i try to get correspondig child items with the following code i run into trouble:
[Code]....
The problem above is that 'test' generates results but not 'test2', wich never return anything. Am i not supposed to be able to do it like i do in 'test2'? I earlier tried to add a child object by replacing ToList() with Add() and that worked. But i cant seem to get anything out of it.
i have used template of datagrid that show product item.i want when buyer choose a product in datagrid the picture of the button in that cell change and next time click event or page load not happen for that specific button in datagrid.I SOLVE THAT PROBLEM BUT PAGE LOAD AND CLICK EVENT HAPPEN. what can i do?
View 4 Repliesam trying to use a stored procedure for the Delete Command, I don't see how to set the parameter values to link to the grid values.When using text command, I would just use "WHERE Row_ID = @Row_ID" (Row_ID being the first column of the grid, and the primary key of the table.)How do I do this using a strored procedure?
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>" SelectCommand="usp_MA_Lookup_Callbacks" SelectCommandType="StoredProcedure"
[code]...
I have a DataSet with multiple DataTables and I use an ObjectDataDataSource to bind my DataGrid to it. One of my tables is correctly displayed in the grid. My problem is, that the grid displays the wrong table.
My tables are related to each other - I make use of the "relation" objects in VS Studio 2010. My ObjectDataSource points to a class with a select method. The DataSet contains several DataTables (e.g. "Variables" and "Components").
[Code]....
How can I configure the DataSet to display the table "Variables" by default?
I'm trying to populate a datasource for a dropdownlist (which is actually in an insertitem template field within a detailsview on the same page) with a selectedvalue from a gridview. When I select a row in my Gridview 1, I get the "no value for a required parameter" message. ( and I have tried various alternatives... setting the selectedvalue of the grid to a variable... setting the selected value of the grid to a textbox nothing seems to work. It seems like this should be a pretty simple thing. I think I'm missing something obvious! Here is my code:
Field in Details view to be populated by the datasource:
[code]....
I'm having trouble setting up a custom NEW User Screen. Here is my situation, I have a Request for Access Screen that uses the CreateNewUser Wizard Control. I want to leave the Question and Answer for this, however I also want a custom NEW User Setup which I build myself to allow the system administrators to setup users, but for this setup I don't want the administrators to have to pick the question and answer for the NEW user, so I would like to bypass this for this setup. However, my Membership.CreateUser keeps asking for it. How can I accomplish this? I've included a copy of my current web.config file. You will notice a AspNetAdminMemberhip which I use to allow the System Administrators to reset passwords.
<?
<
<
<
<
<
<
<
<
</
</
</
</
<
<
<
<
</
<
<
<
<
xml
version="1.0"?><configuration>configSections>sectionGroup
name="system.web.extensions"
type="System.Web.Configuration.SystemWebExtensionsSectionGroup,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">sectionGroup
name="scripting"
type="System.Web.Configuration.ScriptingSectionGroup,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">section
name="scriptResourceHandler"
type="System.Web.Configuration.ScriptingScriptResourceHandlerSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="MachineToApplication"/>sectionGroup
name="webServices"
type="System.Web.Configuration.ScriptingWebServicesSectionGroup,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">section
name="jsonSerialization"
type="System.Web.Configuration.ScriptingJsonSerializationSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="Everywhere"/>section
name="profileService"
type="System.Web.Configuration.ScriptingProfileServiceSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="MachineToApplication"/>section
name="authenticationService"
type="System.Web.Configuration.ScriptingAuthenticationServiceSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="MachineToApplication"/>sectionGroup>sectionGroup>sectionGroup>configSections>connectionStrings>add
name="LBX_ChangeControlConnectionString"
connectionString="Data
Source=10.31.30.26;Initial Catalog=LBX_ChangeControl;Persist Security Info=True;User ID=sa;Password=wstinol"
providerName="System.Data.SqlClient"/>remove
name="LocalSqlServer"/>add
name="LocalSqlServer"
connectionString="Data
Source=10.31.30.26;Initial Catalog=LBX_ChangeControl;Persist Security Info=True;User ID=sa;Password=wstinol"
providerName="System.Data.SqlClient"/>connectionStrings>system.web>membership>providers>add
name="AspNetAdminMembership"
type="System.Web.Security.SqlMembershipProvider"
connectionStringName="LocalSqlServer"
applicationName="/"
enablePasswordReset="true"
requiresQuestionAndAnswer="false"
enablePasswordRetrieval="false"
maxInvalidPasswordAttempts="5"
minRequiredPasswordLength="8"
minRequiredNonalphanumericCharacters="1"
/>
</
</
<
<
<
<
<
<
<
<
providers>membership>roleManager
enabled="true"/>authentication
mode="Forms"/>profile
enabled="true">properties>add
name="FirstName"
type="string"/>add
name="LastName"
type="string"/>add
name="Gender"
type="string"/>add
name="ProfileImageID"
type="string"/>add
name="Department"
type="string"/>add
name="PhoneNumber"
type="string"/>properties>profile>pages>controls>add
tagPrefix="asp"
namespace="System.Web.UI"
assembly="System.Web.Extensions,
Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>controls>pages>
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this affects performance, set this value to true only during development.
<
<
<
<
<
<
</
<
<
-->compilation
debug="true">assemblies>add
assembly="System.Web.Extensions,
Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
assembly="System.Design,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>add
assembly="System.Web.Extensions.Design,
Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>add
assembly="System.Windows.Forms,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/><add
assembly="CrystalDecisions.CrystalReports.Engine,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.ReportSource,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Shared,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Web,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.ReportAppServer.ClientDoc,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Enterprise.Framework,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Enterprise.InfoStore,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></assemblies>compilation>httpHandlers>remove
verb="*"
path="*.asmx"/>add
verb="*"
path="*.asmx"
validate="false"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
verb="*"
path="*_AppService.axd"
validate="false"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
verb="GET,HEAD"
path="ScriptResource.axd"
type="System.Web.Handlers.ScriptResourceHandler,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
validate="false"/>add
verb="GET"
path="CrystalImageHandler.aspx"
type="CrystalDecisions.Web.CrystalImageHandler,
CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></httpHandlers>httpModules>add
name="ScriptModule"
type="System.Web.Handlers.ScriptModule,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>httpModules>system.web>system.webServer>validation
validateIntegratedModeConfiguration="false"/>modules>add
name="ScriptModule"
preCondition="integratedMode"
type="System.Web.Handlers.ScriptModule,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>modules>handlers>remove
name="WebServiceHandlerFactory-Integrated"/>add
name="ScriptHandlerFactory"
verb="*"
path="*.asmx"
preCondition="integratedMode"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
name="ScriptHandlerFactoryAppServices"
verb="*"
path="*_AppService.axd"
preCondition="integratedMode"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
name="ScriptResource"
preCondition="integratedMode"
verb="GET,HEAD"
path="ScriptResource.axd"
type="System.Web.Handlers.ScriptResourceHandler,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>handlers>system.webServer>location
allowOverride="true"
inheritInChildApplications="true">appSettings>add
key="CrystalImageCleaner-AutoStart"
value="true"
/>add
key="CrystalImageCleaner-Sleep"
value="60000"
/>add
key="CrystalImageCleaner-Age"
value="120000"
/>appSettings>location>system.net>mailSettings>smtp
from="Lockbox@tdbanknorth.com">network
host="ME6AWMAIL01.bkng.net"
password=""
userName=""
/>smtp>mailSettings>system.net>configuration>
can we bind any type of System.Collection to DataSource property of a DataGrid ?
View 6 Replieswe have a AutoGenerateColumns-enabled WmxDataGrid in which we are able to update table rows in a DataBase connected with a SqlDataSource.
Each time we clear a field an empty string is written to the database where we want to write DBNull values.
At the moment we generate the update string via UPDATE... SET.. and the SQL Server function NULLIF(value, '').
Works proper but when I want to add the values to e.NewValues in BeginUpdate event I'm not able to read the values from the auto generated text boxes. How do I do that? Is there an easier way to automatically convert empty strings to NULL values?
I have 2 grids gvParent & gvChild I would like to filter gvChild when a row is selected in gvParent the linking fields are contractNo
I added a column for selecting:
<asp:TemplateField ShowHeader="False">
<ItemTemplate>
<asp:LinkButton ID="LinkButton1" runat="server" CausesValidation="False" CommandName="Select"
OnClick="LinkButton1_Click" Text="Select"></asp:LinkButton>
</ItemTemplate>
</asp:TemplateField>
I know how to handle the filtering of the grid (create a criteria and set to rowfilter of the dataview) But, I dont know how to get the value of the column of the selected row.
I have Datagrid , i want to clcik on row and get data in textbox , but my textbox is FreeTextBox control,i tried to use javascript but work for asp.net control not working for freetext box control, how i can capture this code is sample code but it work for asp.net control but not working for my freetextbox
[Code]....
Simply put... I want to duplicate the example found at this link, in VB.net rather than C#.
[URL]
I would like the selectedvalue of the dropdown to display additional data base on its selection in multiple text boxes.
I have tried using the DropDownList OnSelectedIndexChanged property, within a DataGrid EditiItemTemplate, but I cannot retrieve data from the selection. (AutoPostBack is "True"). I can however use a button onclick event to fire a "prre-defined" selection value.
I have 2 datagrid (using .net 1.1). I need to access column of second grid ( i need to make a column of second grid as disabled) when i click "Cancel" link button in First Grid. How can this be done?
View 7 RepliesI am familiar with populating a gridview with data. I am able to bind the Data pulled from the database into the gridview
gridview.DataSource = myDataTable;
gridview.Databound.
If I write the following code, teh gridview will no longer show the data
gridview.DataSource = null;
gridview.Databound.
My question is , I want to make the same thing with a user control that contain a gridview. when I use the user control in an aspx page, I am able to populate it with data, but when I try to make this code, the Datasource does not show, instead, I see .DV. So I tried this code but then , I do not see DataSource property instead I see DV (DataView), when I put .DV = null, I get an error message that the object is not in existed. any idea how to clear the user control gridview from its data.
