DataSource Controls :: Setup SqlCacheDependency Without Using Web.config
Jan 7, 2010
I have setup and SqlCacheDependency for my site and all is working well, but there is one requirement in my task that I dont' seem to be able to find the workaround for. Currently, my code relies on the following web.config settings to allow the SqlCacheDependency to know where to connect to. it is like this:
<connectionStrings>
<add name="connstring1" connectionString="......" />
</connectionStrings>
<caching>
<sqlCacheDependency enabled="true" pollTime="500">
<databases>
<add name="db1" connectionStringName="connstring1" pollTime="500" />
</databases>
</sqlCacheDependency>
</caching>
The problem is that we can't allow in our application the connectionstring to be on the web.config. I am asked to programmatically do all of that. I don't know how and I don't know if that is even possible, is it?
View 4 Replies
Mar 9, 2010
I would like to create a webform in asp.net that allows you add events to a overall application, anyone then can go search that event by a specific date and if that event falls under that recurrence day you will see it. This would be similar to Outlook where you can say it recurs every Monday, Tuesday, Wednesday,... or every third Monday, ...Specifc day of the month, etc. I have created the webform but now I have the problem of how the database works. I have been reading for the past couple days about this but I cannot figure this out. I found some posts that say you can create a seperate table aside from your main table that holds the eventid and the dates of the recurrenecs. The problem is this table could amount to thousands of lines from just a few events input. My question is, is there a formula out there that can do this without creating a crazy big recurrence table? .... If not, how many lines can a MS SQL database hold before it has performance problems?
Here's a link to another forum I found with my same question but I do not understand the answer:
[URL]
View 5 Replies
Mar 24, 2010
In the Setup Project I have 2 web.config files: web.config - used during the development and web_dist.config - the one that should be included into Setup Project. I must be sure the the Setup project will NOT include the web.config and will always include web_dist.config.
In the File System -> Web Application Folder I have added the Content Files from the project.
Also included the web_dist.config and mapped it to the web.config.
But this gives the warning:
WARNING: Two or more objects have the same target location ('[targetdir]web.config') And the actual config file included is web.config and not web_dist.config. What would be the best option to include the web_dist.config (and named as web.config in the setup)?
View 2 Replies
Jun 14, 2010
am writing a series of WSS/MOSS webparts amongst which one will need to detect the current SQL Server database connection, prompt the user to setup a new connectionstring, and fire appropriate stored procedures to create a new database if needed. The user needs to be presented a textbox or label control with the current database connection. I've never had to detect current database connection, what methods do I call for this? If the desirable connection is not present, the web application needs to prompt the user to make a new database. The user really won't make the database, they simply need to click the command button which will fire the stored procedure to create the database.
View 1 Replies
Jul 9, 2010
Am trying to get a working enity model with foreign keys working but have run into a problem. I have imported 3 tables with content and some data.Lets call these tables geo_countries, geo_counties, geo_municipalities and the FK are:1. geo_county have a column country_id wich corresponds to country_id in geo_country 2. geo_municipality have a column county_id wich correspond to the county_id in geo_county.The problem i have is when i try to get correspondig child items with the following code i run into trouble:
[Code]....
The problem above is that 'test' generates results but not 'test2', wich never return anything. Am i not supposed to be able to do it like i do in 'test2'? I earlier tried to add a child object by replacing ToList() with Add() and that worked. But i cant seem to get anything out of it.
View 4 Replies
May 15, 2010
i am using,Asp.net(vb),database sql server 2005, i want to use sysdsn DSN for database connection,so please Guide me how do i use DSN using web.config and class(we have sqlhelper type our own DBclass to set connectionstring for whole applicatoin. which get connection string from web.config),
Now,how do i use/set dsn in this type of scenario.
View 3 Replies
Sep 21, 2010
I'm having trouble setting up a custom NEW User Screen. Here is my situation, I have a Request for Access Screen that uses the CreateNewUser Wizard Control. I want to leave the Question and Answer for this, however I also want a custom NEW User Setup which I build myself to allow the system administrators to setup users, but for this setup I don't want the administrators to have to pick the question and answer for the NEW user, so I would like to bypass this for this setup. However, my Membership.CreateUser keeps asking for it. How can I accomplish this? I've included a copy of my current web.config file. You will notice a AspNetAdminMemberhip which I use to allow the System Administrators to reset passwords.
<?
<
<
<
<
<
<
<
<
</
</
</
</
<
<
<
<
</
<
<
<
<
xml
version="1.0"?><configuration>configSections>sectionGroup
name="system.web.extensions"
type="System.Web.Configuration.SystemWebExtensionsSectionGroup,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">sectionGroup
name="scripting"
type="System.Web.Configuration.ScriptingSectionGroup,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">section
name="scriptResourceHandler"
type="System.Web.Configuration.ScriptingScriptResourceHandlerSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="MachineToApplication"/>sectionGroup
name="webServices"
type="System.Web.Configuration.ScriptingWebServicesSectionGroup,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35">section
name="jsonSerialization"
type="System.Web.Configuration.ScriptingJsonSerializationSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="Everywhere"/>section
name="profileService"
type="System.Web.Configuration.ScriptingProfileServiceSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="MachineToApplication"/>section
name="authenticationService"
type="System.Web.Configuration.ScriptingAuthenticationServiceSection,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
requirePermission="false"
allowDefinition="MachineToApplication"/>sectionGroup>sectionGroup>sectionGroup>configSections>connectionStrings>add
name="LBX_ChangeControlConnectionString"
connectionString="Data
Source=10.31.30.26;Initial Catalog=LBX_ChangeControl;Persist Security Info=True;User ID=sa;Password=wstinol"
providerName="System.Data.SqlClient"/>remove
name="LocalSqlServer"/>add
name="LocalSqlServer"
connectionString="Data
Source=10.31.30.26;Initial Catalog=LBX_ChangeControl;Persist Security Info=True;User ID=sa;Password=wstinol"
providerName="System.Data.SqlClient"/>connectionStrings>system.web>membership>providers>add
name="AspNetAdminMembership"
type="System.Web.Security.SqlMembershipProvider"
connectionStringName="LocalSqlServer"
applicationName="/"
enablePasswordReset="true"
requiresQuestionAndAnswer="false"
enablePasswordRetrieval="false"
maxInvalidPasswordAttempts="5"
minRequiredPasswordLength="8"
minRequiredNonalphanumericCharacters="1"
/>
</
</
<
<
<
<
<
<
<
<
providers>membership>roleManager
enabled="true"/>authentication
mode="Forms"/>profile
enabled="true">properties>add
name="FirstName"
type="string"/>add
name="LastName"
type="string"/>add
name="Gender"
type="string"/>add
name="ProfileImageID"
type="string"/>add
name="Department"
type="string"/>add
name="PhoneNumber"
type="string"/>properties>profile>pages>controls>add
tagPrefix="asp"
namespace="System.Web.UI"
assembly="System.Web.Extensions,
Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>controls>pages>
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this affects performance, set this value to true only during development.
<
<
<
<
<
<
</
<
<
-->compilation
debug="true">assemblies>add
assembly="System.Web.Extensions,
Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
assembly="System.Design,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>add
assembly="System.Web.Extensions.Design,
Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>add
assembly="System.Windows.Forms,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/><add
assembly="CrystalDecisions.CrystalReports.Engine,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.ReportSource,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Shared,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Web,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.ReportAppServer.ClientDoc,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Enterprise.Framework,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/><add
assembly="CrystalDecisions.Enterprise.InfoStore,
Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></assemblies>compilation>httpHandlers>remove
verb="*"
path="*.asmx"/>add
verb="*"
path="*.asmx"
validate="false"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
verb="*"
path="*_AppService.axd"
validate="false"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
verb="GET,HEAD"
path="ScriptResource.axd"
type="System.Web.Handlers.ScriptResourceHandler,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
validate="false"/>add
verb="GET"
path="CrystalImageHandler.aspx"
type="CrystalDecisions.Web.CrystalImageHandler,
CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/></httpHandlers>httpModules>add
name="ScriptModule"
type="System.Web.Handlers.ScriptModule,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>httpModules>system.web>system.webServer>validation
validateIntegratedModeConfiguration="false"/>modules>add
name="ScriptModule"
preCondition="integratedMode"
type="System.Web.Handlers.ScriptModule,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>modules>handlers>remove
name="WebServiceHandlerFactory-Integrated"/>add
name="ScriptHandlerFactory"
verb="*"
path="*.asmx"
preCondition="integratedMode"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
name="ScriptHandlerFactoryAppServices"
verb="*"
path="*_AppService.axd"
preCondition="integratedMode"
type="System.Web.Script.Services.ScriptHandlerFactory,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>add
name="ScriptResource"
preCondition="integratedMode"
verb="GET,HEAD"
path="ScriptResource.axd"
type="System.Web.Handlers.ScriptResourceHandler,
System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>handlers>system.webServer>location
allowOverride="true"
inheritInChildApplications="true">appSettings>add
key="CrystalImageCleaner-AutoStart"
value="true"
/>add
key="CrystalImageCleaner-Sleep"
value="60000"
/>add
key="CrystalImageCleaner-Age"
value="120000"
/>appSettings>location>system.net>mailSettings>smtp
from="Lockbox@tdbanknorth.com">network
host="ME6AWMAIL01.bkng.net"
password=""
userName=""
/>smtp>mailSettings>system.net>configuration>
View 1 Replies
Sep 21, 2010
Going to start this thread over so that it makes more sense.Anyways, my problem is that when trying to configure my ObjectDataSource in design mode, it only gives me 2 options and never gives me the option for the one I need. The other 2 work fine, but for some reason, this 3rd one will not show up in the list.I have a webpage with pics illustrating how I have it setup and the problem ----------> https://sites.google.com/site/configuringobjectdatasource/And I have another webpage with pics illustrating steps I have taken to fix this problem but still nothing -----> https://sites.google.com/site/configodspart2/what is going on and why it will not show up in my list when I try to configure?
View 3 Replies
Feb 2, 2010
I am writing an app that has a bit of process flow to it. On the save of a record, I need to check some fields to make sure they are not null. If they are not null, I will update a 'SectionComplete' field to true.
The thing is, I would like to store my fields in the web.config. So, I would like to have a string in the appsettings section that has a list of field names that are required. Then in my method, I would call these fields out and check each one for the specific record id, and then update the database.
I would like to do this in the web.config so we could add/remove columns without having to redeploy.
For example: my required fields are name, id, and phone. For section one to be labeled complete, all of these fields would need to be not null.
web.config would have this entry:
<add key="Stage1Fields" value="name, id, phone"/>
View 4 Replies
