DataSource Controls :: Using A Form View Control Instead Of The SQL Statement?
Feb 10, 2010
I hope I have the right forum =)
Here is the issue.
I have a table:
[URL]
What I would like to do is retrieve the Grade score based on a number that is between the Max and Min for that Job Title.
I presume the sql would be like:
"SELECT [Grade] FROM [NUGGET_Tech_Score] WHERE ([Job_Title] = @Job_Title AND @total BETWEEN [MinScore] and [MaxScore])"
However since I am new at this, I am not sure how to get the grade and show it as a label on my form.
Should I be using a Form View control instead of the SQL statement?
View 4 Replies
Similar Messages:
Aug 4, 2010
I am using a from view for data entry. I need to verify that a check box is true or false after editing a record.
I have been accessing label text using the following|
CType(FormView1.FindControl("RespDeptLabel"), Label).Text
How can I access the state of a checkbox in the form view to determine if it is true or false
View 4 Replies
Jan 18, 2010
Once again something for a new bee... I have 3 questions -
1. I wanted to add a drop down list instead of a text box to my grid control (which should come up on clicking editing)
2. Similar control for form view
3. On click "select" in a grid view, I want to open a new web page which will show a form view attached with the same "select" index.
View 2 Replies
Jan 20, 2010
how to call AJax rating control in Form view ?
I have 1 rating control in fromview in code behid page i wan to call Ajax rating contrl in formview for determine event and property .
View 1 Replies
Feb 11, 2011
I am new to working with the Form View control so I am not quite sure how to do this.
I want my users to be able to enter search criteria into text boxes at the bottom of my FV just beneath a table and then click a button to initiate a DB search and rebind of the form.
Where do I create/ access the button's event handler to make this happen ?
I would like to have buttons in the Item template and possibly the edit template sections of the FV.
So I have created my buttons and now I want to access their button click events.
Here is my meager start this is located in the Formview databound event:
[Code]....
View 2 Replies
Aug 25, 2010
I know it is recommended to use a using statement with a sqldatareader, but I was wondering if it is necessary when you are setting the datasource of a control to a datasource directly. in some places in my code I do this.
using (SqlDataReader reader = getReader())
{
while (reader.Read())
{
// do stuff with data
}
}
when binding to a control I do this.
ddlCustomer.DataSource = getReader(); // get Reader returns a sqldataReader
ddlCustomer.DataBind();
In the second case, do I need to use a using statement. Do i have to first declare an SqlDataReader in a using statement, then set the DataSource to that object. Seems like more clutter in the code, so i was hoping binding to the SqlDataReader disploses of the SqlDataReader.
View 3 Replies
Apr 1, 2010
How to add a form and a loginview control at runtime? and how can i set loginview LogedInTemplate and AnonymouseTemplate at runtime?
View 4 Replies
Aug 18, 2015
I want to learn how to use form view but i can't find any tutorial that have a get data from database and display using form view or inserting data to database.
View 1 Replies
Mar 12, 2010
i need to know if this can be done :
i have a grid form with 3 fields field1 & field2 & field3.
in the insert statement the field 3 gets a javascript function result that uses filed1 & 2 values.
Now what i want in the grid view update statement is : to call the @field 1 & @field2 from the update statement to a similar javascript function..(do soem calculation ) and then re-assign the java function result to the @field3 variable in the update statement..
(//// Or simply what i want is to do the same calcultions onthe fields while perfoming an update operation.. //).
how can i perfom the calculations in a grid view update statament ..
View 3 Replies
Jan 28, 2010
OBJECT_ID(N'AdventureWorks.Person.Address');
what does the "N" mean or do in this statement?
View 4 Replies
Mar 10, 2010
how to do do some action recurting each row? My data looks like
[Column1] [Column2]
item 1 10
item 2 5
I would like to do something like..
foreach row in Column1 <-- how would I do this part??
While (row.Column2 > 0)
BEGIN
.. do something
row.Column2 = row.Column2-1
END
View 3 Replies
Mar 17, 2010
If I run the following SQL script:
[Code]....
View 3 Replies
Feb 24, 2010
I am writing a simple form that will take in data and insert it into a db if it's a new record and update the existing record if it already exists. The insert works fine, but the update isn't working at all, yet the code looks solid to me and everything I've compared it to in my google searches.
[Code]....
View 7 Replies
Apr 24, 2010
I want the select statement for the above scenario.
View 2 Replies
Mar 25, 2010
I've done some SSIS package work in the past, but am by no means an expert.
I want to use an SSIS package to do the following:
1. Get the file name of the newest file in a windows folder (using a filename template like his: filename_ *.txt where the * part is always a date in the format of yyyy-mm-dd.
2. Use that file name in later portions of the SSIS package by reading the file and transferring data from it to a SQL table using a Data Flow task.
and use the result (which should be the name of the newest file) to open that file and pull data out of it and into a 2nd SQL table. I admit, I'm not sure how to use the dynamic result of this SELECT query as the file name in a flat file connection manager.
View 6 Replies
Oct 21, 2010
I am rather confused as how or where to declare this variable in asp.net.
[Code]....
Whenever i put this in my sqldatasource for it is asking me to Define Parameters:
The wizard has detected one or more parameters in your SELECT statement. For each parameter in the Select Statement, choose a source for the parameter's value.
View 4 Replies
Aug 16, 2010
I have SQL Details View insert statement, I need to have a Condition checked for the Insert Query. The condition is, I do have a table by name table1 with the No of Questions (for Eg: 10). The insert statement shud insert data to the table2 (Another table) only if the no of rows is less than or equal to 10 else it shud give me a message (It has exceeded the no of questions).
View 3 Replies
Apr 7, 2010
I am trying to do an insert statement to a table from classic ASP.I tried the below:
[Code]....
But, I am getting the error as: Incorrect syntax near the keyword 'where'.How to insert data, using a where clause in the above scenario?
View 5 Replies
Apr 30, 2010
How would you handle an INSERT that gets some values from another table using SELECT, where you wanted some values to come from the source table record and other values to come from a different parameter source like a session value? Is this possible?
View 3 Replies
Jun 22, 2010
i'm developing windows application one of its forms supposed to fill a table called rooms with data throughout a collection of text boxes and comboboxes controls, i'm successfuly bound each control to the binding source and make sure that each data adapter contains the required data but when i start to excute the insert statement
insert into rooms([room_id],[floor],[price],[currency_id],[rec_id],[s/d],[s/ns],[room_direction],status)
values( '"+Int64.Parse(textBox1.Text) +
"' ,'" +
Int64.Parse(textBox2.Text) +
"', '" +
Int64.Parse(textBox3.Text) +
"','" + comboBox1.SelectedIndex +
"','" + comboBox2.SelectedIndex +
"','" + comboBox3.SelectedIndex +
"','" + comboBox4.SelectedIndex +
"','" + textBox4.Text +
"','" + comboBox5.SelectedIndex +
"')
it displays an error message when i'm trying to select a value from the combobox for any parameter that is"column currenc_id is constrained to be unique value 2 is already exists"can any body help me it is very important
View 5 Replies
Feb 2, 2010
I don't know if I'm posting this in the right place - I have a feeling it can't be too difficult but I can't seem to figure it out. I've come across this problem many times and I've never solved it. I would imagine the scenario is commonplace - I have a table of Products with a PK of ProductID, and a table of related images with a FK of ProductID. Each product can have many images, but for my initial display I want to display one product record with one image record. I have a Sequence field in the Images table and I could pick the lowest one. Right and left Joins return too many records - if I have three images for Product 1 then Product 1 is listed three times.
I've gotten around this before using a flag in the Products table, or listing an image in both tables but I'm sure there must be a SQL statement that can get the information that I need.
View 5 Replies
Jan 20, 2010
I am currently trying to create a SQL statement that does a multiple count on a table. The table has a number of reports each listing the "User" who created that report and if that report is "Famous" (A famous report is symbolised as 2 in the table).
What I need to create is a SQL statement that returns each User with the total number of reports he/she has created and how many of these reports are famous. My current SQL statement looks like:
[Code]....
View 4 Replies
Apr 17, 2010
I need to execute the stored proc accross the parameters resulted from select statement
I have created one stored procedure which require one parameters ( username ) ..
i need to execute this SP accross the Select Statement which lists all the username
somethibng like :
Set @username = (Select usename from my table)
EXEC dbo.Duplicate_Data @username
View 7 Replies
Apr 5, 2010
[Code]....
I must have a LINQ Statement does i can show if my Time in the DB <= as the Time where i become from my Session +60 Minutes ??
View 3 Replies
Jun 22, 2010
I have a method to execute two "Update" sql statements.
The first one works fine and the second one I can't get to work for nothing.
Here is the entire method:
[Code]....
The error I am getting is "Incorrect syntax near '05'."
It is occuring on the next to the last line which is:
dc.ExecuteCommand(sql);
I update the variable "sql" first so I can debug. At the time it crashes the value of sql is:
"Update Blogs set Status = 'Archived', ArchiveDate = 06/22/2010 05:14:46 PM Where (BlogID != 1) and (Status = 'Published') and (AuthorID = 9e37e028-c205-4903-920e-e8643b30a724)"
It appears to be the ArchiveDate that is causing the problem here. The "05" is the hour of the time portion. Both ArcgiveDate and PublishDate are defined exactly the same in the database. If you look at the first dc.ExecuteCommand it does exactly the same
thing with PublishDate (DateTime column) in the same table and it works just fine.
Then I modifed the code and remove the ArchiveDate from the sql statement then I get the error:
"Incorrect syntax near 'e028'."
which as you can see is part of the AuthorIDs value in the where clause. So I am assuming both the date and the Guid / Author ID is causing problems. I have tried enclosing the values in quotes but I just cant make this work even though it seems to be working fine in other places.
I even remove the code for the author ID and left in the code for the ArchiveDate and it still does not work so I have proved that both are causing a problem.
View 1 Replies
