DataTable.Rows.Find Returns Null
Feb 13, 2010
I have a DataTable for which a PrimaryKey constraint has been set to be a combination of an integer column and a datetime column. When I try to 'Find' a row by saying,
dtFunds.Rows.Find(iContainerIndex)
I get a null value. iContainerIndex has been defined as an object array of size 2 with the integer ID and date values in it.
When I set a breakpoint in my code, I see that the very same values are present in the datatable.
If I try to execute, DataTable.Select() method with the integer column filter, I get a result - but returns no result when called with the date column filter.
What am I doing wrong here? The very same DateTime value is present in the datatable.
View 1 Replies
Similar Messages:
Feb 7, 2011
I am trying to use a SqlDataAdapter to fill a DataTable, which I use as a data source to a DataGrid. The query is fine, at least when I run it manually in SSMSE. When I do the fill operation, the table gets the right columns, but no rows. The most frustrating part of this is that the code is identical (with a different query) on a different page. I cannot post the query, but my initialization code looks like this:
SqlCommand areaDAC = new SqlCommand (areaQuery, connection);
areaDAC.Parameters.Add (new SqlParameter ("@param", System.Data.SqlDbType.NVarChar, 50));
m_areaDataAdapter = new SqlDataAdapter (areaDAC);
Then to use it:
m_areaDataAdapter.SelectCommand.Parameters["@param"].Value = "Filter Val";
DataTable table = new DataTable ();
m_areaDataAdapter.Fill (table);
At this point, table has the right number of columns and no rows. I know the parameters are being added correctly, I know that data exists for the given query.
Update (as provided by Nik in a comment):
[Code]....
View 4 Replies
Oct 7, 2010
Since I am not using a DataSourceId at the markup I am having to create my own Sorting handler. I found a sample on MSDN but the variable 'dataTable' always returns null why?
[Code]....
and here is how I am feeding the DataGrid:
[Code]....
View 2 Replies
Sep 9, 2010
I have a DataTable of available time slots. I have another DataTable of reserved time slots. I need to remove from the list of available slots the ones that have been reserved. The blocks are in 15 minute increments, but one of my problems is that the reservation can be longer than 15 minutes. I've had some luck removing one or two, but not all of the required columns.
Here's my code (it doesn't work right now).
[Code]....
View 1 Replies
Nov 1, 2010
why the below javascript code always returns null (mean alert) ?
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="WebApplication3.WebForm1" %>
<%@ Register Assembly="Telerik.Web.UI" Namespace="Telerik.Web.UI" TagPrefix="telerik" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<telerik:RadScriptManager ID="RadScriptManager1" runat="server">
</telerik:RadScriptManager>
<div>
<telerik:RadComboBox ID="RadComboBox1" runat="server">
</telerik:RadComboBox>
</div>
<telerik:RadCodeBlock ID="RadCodeBlock1" runat="server">
<script type="text/javascript">
var combo = $find("<%= RadComboBox1.ClientID %>");
alert(combo);
</script>
</telerik:RadCodeBlock>
</form>
</body>
</html>
View 2 Replies
Jul 30, 2010
I want to use multiple targets with my ModalPopUp extender. One of my buttons is set as target in the ModalPopup and the other one will use server-side code to show the ModalPopup.
This is my ModalPopup so far:
<msAjax:ModalPopupExtender ID="modalInform" runat="server"
BehaviorID="modalInform"
TargetControlID="btnSearchUsers" [code].....
Then I found this little tutorial on the ASP.NET AJAX site.But when I use $find("modalInform") in the pageLoad Javascript function (as defined in the tutorial at the bottom), I'm always getting a $find("modalInform") is null error.
This code is included in a usercontrol, the usercontrol is used in a ASPX page and this ASPX-page uses a MasterPage.
I've noticed that if I'm using
<%= modalInform.ClientID %>
I'm getting a different value then defined in my HTML-source (propably because of the MasterPage?).
View 1 Replies
Feb 15, 2011
[Code]....
If I use $get, it does work as the expected functionality for $get. It is only $find that does not work.
Can anyone explain the problem?
View 5 Replies
Nov 29, 2013
I have detailsview control with bound fields...some using Templatefields. I am trying to access values in those fields but i get nulls....i really dont know why..I am proving all my code....
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Projects.aspx.vb" Inherits="Projects" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
<title>Projects Statuses</title>
[code]....
I guess something might be getting messy with the mode changing event... a postback? But if i remove the databinding code, i get an error! why find control returns null??
View 1 Replies
Mar 10, 2011
I have a data table say i have a column like x which is primary key so i should get the row where this x values in empty.
View 2 Replies
Jan 15, 2011
I have made a custom DataTable
Dim dt As New DataTable("RizPardakht")
Dim RowID As New DataColumn("tbz_GatiPardakhtID")
Dim FishNo As New DataColumn("tbz_FishNo")
[code]...
View 8 Replies
Jul 10, 2010
I have a webpage with a select object and a GridView object. For testing my problem i've created asp button and html button.On pageLoad the GV is empty and select is being filled with names. (GV is not appearing)After choosing a name from the select options, the user should click a button and then the GV need to be filled with relevant info.I am having 2 "related" problems:
1. When clicking on the asp button and getting into the click function on the aspx.cs file, i can't find the select object and retrieve the selected option. How can i get this?
2. When clicking on the html button and getting into the button_click function on the aspx file (javascript), i can't find the GV object (getElementByID("GridView1") returns null). I guess that it's because the GV is not loaded initialy since it's empty.I've tried also using callback methods, but the although it seems like i am reaching the GV and performing DataBind(), the GV table won't show on the page.
View 4 Replies
May 31, 2010
I have one big DataTable with X rows. I want to select Y rows from it and bind them to a new ViewList. While doing it, I want to delete these rows from the DataTable (Having X - Y rows).
What is the best and fast way to do it?
I don't know if it is better to create a new DataTable to have the Y and after that bind them to a ViewList or something else?
I'm also looking for example in code how to select/delete rows from DataTable.
View 1 Replies
Feb 17, 2011
I'm .NET newbie and I have to write function which executes stored procedure and return DataTable.
my SqlConnection is already initialized and while running in debugger I can see DataAdapter returns values, but my DataTable is empty.
public DataTable ExecStoredProcedure(String spName, String uId)
{
DataTable dt = new DataTable();
try
{
conn.Open();
SqlCommand cmd = new SqlCommand(spName, conn);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@UnitIDList", uId);
SqlDataAdapter da = new SqlDataAdapter(cmd);
da.Fill(dt);
}
catch (SqlException ex)
{
throw new Exception(ex.StackTrace + ex.Message);.......
View 1 Replies
Jul 20, 2010
I have a very strange issue where SelectionList always returns NULL when i try check its Selected Item/Value. I Googled a bit and I found out that when i click the submit button, the page is being refreshed and the SelectionList is being data bound again so it will revert back to its original behavior.
Then i tried enclosing the binding code in the Page_Load event in a !IsPostBack but still when i try to access the Selected property it is null and an exception is thrown.
My code goes something like this... (the braces are not matched properly)
static SelectionList[] Symptoms;
static string UserID = "";
cmbSymptoms1,cmbSymptoms2,cmbSymptoms3 and cmbSymptoms4 are SelectionLists. I took them in to an array of SelectionList and then set the properties.
I had to make them static or else when i click the button to update, they will not retain their values.
protected void Page_Load(object sender, EventArgs e)
{
if (this.IsPostBack == false)
{
//System.Diagnostics.Debug.WriteLine("Not IsPostBack");
if (Request.QueryString["id"] != null && Request.QueryString.ToString() != "")
{
//System.Diagnostics.Debug.WriteLine("id query string is not null :- " + Request.QueryString["id"]);
myclass = new Class1();...........
View 1 Replies
May 22, 2010
I am working on a mvc project, and having problem with json. i have created a demo project with list of colors
public JsonResult GetResult()
{
List<string> strList = new List<string>();
strList.Add("white");
strList.Add("blue");
strList.Add("black");
strList.Add("red");
strList.Add("orange");
strList.Add("green");
return this.Json(strList);
}
i am able to get these on my page, but when i try to delete one color, that is when i send the following using jquery
function deleteItem(item) {
$.ajax({
type: "POST",
url: "/Home/Delete/white",
data: "{}",
contentType: "application/json; charset=utf-8",
success: ajaxCallSucceed,
dataType: "json",
failure: ajaxCallFailed
});
}
the controler action public JsonResult Delete(string Color) {} Color always returns null, even if i have specified "/Home/Delete/white" in the url. i know i am doing something wrong or missing something, but not able to find out what.
View 4 Replies
Feb 15, 2011
I have a class library which has my LINQ doc in it. I added a stored procedure and I get the following in my .dbml.layout :
[Code]....
I include a reference to the dll of the class library to my web project and I get an error about value being returned as int where I am trying to put contents into a datalist or similar.
Code in class that calls this SP :
[Code]....
So I switched code to the following in my dbml.layout document :
[Function(Name="dbo.sp_newsSearch")]public IEnumerable<news_search_result> sp_newsSearch([Parameter(DbType="VarChar(200)")] string searchVal){IExecuteResult result = this.ExecuteMethodCall(this, ((MethodInfo)(MethodInfo.GetCurrentMethod())), searchVal);return ((IEnumerable<news_search_result>)(result.ReturnValue));}
And included the following in an external file news_search_result.cs
[Code]....
But now I just get nothing returned. Is this wrong way of calling a SP via LINQ? or have I just put the wrong return type on my LINQ class?
View 2 Replies
Feb 19, 2010
had used ajax.method in my project & its working fine, but now Every Ajax.Method returns null now,
View 1 Replies
Mar 1, 2010
I have a datalist with price label
<asp:label runat="server" ID="lblPrice" Font-Bold="true" Font-Size="Medium"> <%# DataBinder.Eval(Container.DataItem, "dProduct_price") %></asp:label>
i have used to find the control in my code but when i debug the value is null
Label price = (Label)e.Item.FindControl("lblPrice");
View 1 Replies
Aug 17, 2010
I have a linq to sql entity class in which I declared some DateTime fileds like this:
[Code]....
And this is how I fetch data form repository:
[Code]....
All non DateTime fields are filled properly but all datetimes are null.[Column(DbType = "smalldatetime")]
View 8 Replies
Jan 31, 2010
Why method FindControl() returns null on FormView until call DataBind(). After that it returns everything correctly? What workaround are there? Call DataBind() before first call of FindControl() ?
View 3 Replies
Sep 2, 2010
It seemed to be the right place to post to.My problem is that when I try to read registry key, I get null value, even if it exists (regedit shows it exists).Application is windows service with Log On As Local System and registry key im trying to read is in HKEY_LOCAL_MACHINESOFTWAREClassesCLSIDOn my development machine (x64 win7) it works fine. But in live server (x64 windows server 2008 r2) I get NULL.ese operating systems should have similar policies or does Local System on server 2008 have any restrictions i should know about?
View 1 Replies
Oct 26, 2010
This is what I'm trying to run:
[Code]....
When I browse to www.mysite.com/mycontroller/myaction/myid, everything works ok. But visiting www.mysite.com/mycontroller/myaction produces:Server Error in '/' Application.Object reference not set to an instance of an object.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
View 3 Replies
Aug 2, 2010
will get to the matter quickly:
I have a new webpage "smile.aspx" with the web method "GetDate" that returns "current date as string".
I am using JQuery to make a Ajax call to that method, Right now i am using ASP.NET Version 2.0[.NET Framework 2.0,Visual Studio 2005].
The parameter returned by the Sucess function seem to return "undefined" .anyone Techhy, quick look at the ajax request code below will answer my problem.
[Code]....
View 2 Replies
Jan 24, 2010
I am following Chris Pietschmann's solution for theming in ASP.NET MVC.
One thing I have noticed is that the view name is not being retrieved from the ViewLocationCache on subsequent requests. I am using ASP.NET MVC 2.0 RC
When the following code is executed:
this.ViewLocationCache.InsertViewLocation(controllerContext.HttpContext, cacheKey, virtualPath);
and I hover over this.ViewLocationCache it just returns {System.Web.Mvc.NullViewLocationCache} - suggesting nothing was added?
View 1 Replies
Jan 7, 2010
I've been working for a long time with GridViews and DetailsViews, but yesterday I've come across a new scenario, which I quite do not understand.
I have a GridView with ImageButton (CommandName="Insert") which will change the mode of the DetailsView to Insert. Afterwards I'll look for a DropDownList inside that DetailsView and add some items dynamically. Works fine, but one first the first time I press that ImageButton. If I click on "Cancel" in the DetailsView and press the ImageButton again, the .FindControl() Method returns null.
I've created this sample: (To make it run in your Visual Studio, just bind a DataSource to the DetailsView, otherwise it will not be rendered)
Markup:
<asp:GridView ID="gvCategory" runat="server" OnRowCommand="gvCategory_RowCommand">
<Columns>
</Columns>
<EmptyDataTemplate>
[Code]....
I have also tried using a ItemTemplate, and not a InsertItemTemplate, but this results in the same. After using the ChangeMode-Method the DetailsView.CurrentMode == InsertMode. The only thing I can think of is, that the markup is already generated for the ItemTemplate and changing the Mode to InsertMode can't affect the rendered markup, or something like this.
View 1 Replies
