I have convert Classic ASP Project into .Net,
Now my requirement is that i have to give One link for Access Classic ASP Project.
For that I want link like
[URL]
Here [URL] is a virtual directory created for .Net Page. Now inside that i need to create one folder "OLDSITE" and inside oldside i need to put classic asp page.
How can i set virtual directory for classic asp page.
I am trying to display a couple of charts of my site. The two charts are here: [URL]. I did a right-click and "view page source", copied the pertinent information into my project and when I run it, I only see a parameter, or outline of where the chart should be. I see pretty much everything EXCEPT for the chart. I've been to other sites and was able to display the chart DJIA chart in my project, but it doesn't update throughout the day. Is there an easy way to set up these kinds of charts, or do you need some kind of direct connection to one of the exchanges or some such thing?
View 6 RepliesWhen I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:
Cannot initialize the ASP.NET project'{Project Name}'.
The event log specifies the following reason:
Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.
I have downloaded a project from the internet called the SMS Source example. I wanted to open this project in VS2010, so a conversion wizard has popped up prompting for the conversion. But it has errors in converting.
Error msg:
Conversion Report - SMSSend.csproj:
Error converting project file. MSB0001: Internal MSBuild Error: Missing resource 'MissingAttribute'
On the Timelog page, I want to put 2 dropdown list: 1 Manufacturing Project, 1 Engineer Project. However, users can choose either Manufacturing project dropdown or Engineer project dropdown (not both).
View 4 RepliesI'm trying create unit testing for an existing website project (not web application project). I cannot access my under test classes unless I use accessor. However, if I use accessor, I have problem to initiate an object with passing arguments. I only want to create unit tetsing for App_Code. After searching web, and I found that I'd better to create a web application project using my current existing website project. From solution explorer, add new project ->using existing website. My questions is: what impact will have for my current website to create the new project? Should I just convert my current website to web application? If do that, will it cuase problems on my website? I am new on asp.net, still learning..
View 1 RepliesWe are upgrading .Net 2.0 Framework Web service project to .Net 3.5 Project. We are not changing any methods. Will there be any change in the proxy because of this Framework Upgrade.My requirement is to all the existing clients consuming this webservice should not have any impact due to this framework upgrade.
View 1 RepliesApproximate cost of the project Duration of the project ( There are 2 Developers ) Can I charge the client for software license ( like Visual Studio license since I have purchased it by paying a hefty amount)
My profile as a developer is as follows:
I am a C#, .net, ASP.net developer with 3 years experience in enterprise class web and desktop projects. I can work 20 hours a week
The brief requirements of the project are as follows::
I have to develop an Ecommerce website. The website is meant for buyers, sellers, advertisers and bidders ( I would say it is Business to Business and also Business to Customer site ) The HTML's will be given by the client. The website will have all the features of any Ecommerce site like buying products, selling them, searching products, sorting them,etc The website should conform to W3C standards
I just converted an ASP.NET Web Site Project to a Web Application Project in VS 2010. After I run the application though it seems that my class polymorphism broke. I don't have a clue as to why this could occur.
So in the following code when I call base.OnLoad(e) I am getting errors in the base class because the variable myString is null. In fact all the variables for the Base class are null. I can do
[code]....
Let's say I have a Visual Studio solution with a Web project, a BLL project, and a DAL project. I'm trying to follow the repository pattern keeping my SQL code in the DAL with an interface that is referenced by the BLL.
I have a handful of common solutions for things such as error handling, usage logging, and other things that can be considered utility functions (i.e. not in the business spec). I'm keeping these in a Common project.
Here are a few ideas I've had with regards to structuring the Common project...
Bundle SQL with logic in a given class
Create a layered solution within the Common project
Discard the Common project and put utility functions in with BLL/DAL
Is one of these ideas better/worse than the other? Does anyone have a better solution?
It's worth noting that these utility functions will be reused in a variety of other applications.
Taken from http://msdn.microsoft.com/en-us/library/dd410597(VS.100).aspx ...
If you are using the Standard or Express editions of Visual Studio, the Create Unit Test Project dialog box is not displayed. Instead, the new MVC application project is generated without a test project.
I have created 2 projects in a solution. One project contains Asp.net classes with login page and different other pages.
Another project contains a web service.
When I launch the solution(click F6 in visual studio 2008) the login page can access to the method of the webservice. Both projects are launched.
However when i added this 2 projects into IIS and deploy them (with create command) the login page cannot contact the method of the web service. Even though the web service is running because i can acces it manually. But they cannot communicate each other.
I recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?
I was not able to do unit testing for our existing web site project. I converted the web site project to a web application project. I did some unit testing and changes on the converted web application project. However, my co-worker was doing UI testing on the web site project. We need put UI testing and unit testing to the web application project. Is it possible to move the UI testing code that my co-worker did to the web application project I am working? If so, how do you do it?
View 2 RepliesOur team doing a project in asp.net & Mssql 2005.since our team member are distributed. we need a online tool for tracking project changes, and control access to our online code repositories.
[code]....
I've created a new vs.net project and added all the files from an asp.net website project.
When I compile, it couldn't find a reference to a class.
In the AppCode the class was defined, but without a namespace.
So I added a namespace, and then on the default.aspx.cs (this is where the error was originating) I added the using statement.
The using statement was not picking up the namespace.
i know some thing about the MVP pattern... but when you want to develop a project(web project) based on the MVP pattern from where we need to start... i mean which component we need to start developing first ...
Model or View or Presenter... what are the points that we need to keep in mind....
When implementing MVP in a ASP.NET project, what are your preferences for how you organize the relationship between your presentation project and your web project?
View 1 RepliesI am unable to register my control from another project in my current project. I have a commoncontrols project and a controlpanel project now how can i get the usercontrols from the commoncontrols project?
The controlname is ucReg.ascx.
I want to generate the two crystal reports one is employee and another is project. Now I want to display the two reports in a single crystal report viewer. I've tried using sub-reports but the page header is not available in a sub reports. So I want to display two separate crystalreports in a single viewer.
View 2 Repliesi have the project files which consist of some folders and some aspx and aspx.vb files.
I do not have any solution file or .sproj file in it.
so I need open a single file at a time and I can not debug the whole project or any single file also.
Do I have to generate a project file or solution file,
I just wanted to open the whole project file by opening a single file in VS 2008.
so that all the folder structure and the files I can view in solution explorer.
I have two projects in my solution
1- asp.net web project.
2- wcf serivce project.
3- other common projects between two listed above
Current on the local dev machine I have to run two visual studio instance to run both projects in debug mode. That makes the system run out of resources as these projects share some other project in the soultion which are heavy in files.
Is there a way i can hookup the wcf project on a sinlge visual stodio instance and also be able to debug my asp.net web project. ? I do not want to combine the web and wcf project in to one. Have already considred this option.
What is the difference between Web Application Project and Web Site Project ?
View 6 RepliesI don't see Empty Project option in Visual Studion 2008 under NEW > Project?
View 1 Repliesi have an project with name called(dbservice layer) which is in path: d:webserviceDBService. here i have an webservice which connects to DB and returns an object of an class.
once i added an reference here i get an url:http://localhost:2371/Jobs.svc
now i have another project name (UILayer) whic is in path: E:SchoolUILayer i added an service reference here with url as http://localhost:2371/Jobs.svc but i get an messgae telling service is unable why is that happening.
if both my webserivce layer and ui layer are in same project. then i able to use the webserive in the ui layer. and get the required output
so i wanted to know is there any way we can acesss the webserive from one project to another project