Dynamic Page Changing / Redirect To Others Pages In Web Application?

May 18, 2010

I have web servie and web application ..Request hit from widows application to web service .if any request got means i need to redirect to some others pages in web application ,how can we do ..web application always open in server ..

View 1 Replies


Similar Messages:

Redirect Different Website Without Changing Page Url

Jan 25, 2010

i have created sub domail of my sub folder in website.i want to navigate subdomail url to my project.so opening subdomain link i want to maintain its url in addressbar.

View 2 Replies

Redirect Different Website Without Changing Page Url?

Feb 18, 2010

i have created sub domail of my sub folder in my website.. i want to navigate subdomail url to my project like.. www.subdomain.domain.com to www.domain.comwithout changing www.subdomain.domain.com url for example open w.glmmatrimony.com and subdomain www.rajarani.glmmatrimony.com opening subdomain link i want to maintain its url in addressbar.

View 1 Replies

Security :: Changing Failed Authorization Redirect Page?

May 12, 2010

Currently, when the authorization fails, it redirects to the login page by default. However if the user is logged in, it makes no sense to be redirected to the login page. I would like it to be redirected to an eror page instead.

View 5 Replies

Restricting Certain Pages -- Redirect On Every Page? Or On Master Page By Viewing Current Page In Url?

Feb 6, 2011

Per different user mode, some pages should not be accessible by users unless they have a valid session key.In your opinions -- would it be better to have a list of acceptable pages in the master page, and check if the current page is valid for the current user? Or handle this on every child page?I'm thinking master page, just want to hear what your input would be.

View 2 Replies

Include Normal Pages (webforms Or Mvc) In Dynamic Data Web Application

May 21, 2010

can I include normal asp.net pages (webforms or mvc) in a Dynamic Data web application?

View 2 Replies

Changing Dynamic Controls Via DropDownList On Content Page?

Nov 4, 2010

Problem: Content Page with Wizard Control with UpdatePanel and Placeholder. Above the UpdatePanel is a DropDownList. I need to display different input controls below the drop-down list when the user changes the selection in the drop-down list. When the user clicks 'Next' on the wizard control, I need to be able to get the data out of those dynamic controls as well.

I know all the dynamic controls have to be created in the OnInit method in order to get the data back from those controls during the postback. However, when the drop-down list's SelectedIndexChanged event is fired, the OnInit method is called... then the PageLoad... and finally the handler for the SelectedIndexChanged event is called. ViewState hasn't been restored until well after the OnInit & PageLoad methods have been called, so there is no way to know what the user chose in the list box at the time OnInit is called... which exactly when I'm required to create the dynamic controls.

View 1 Replies

How To Derive Master Pages / Page Titles And Dynamic Css Links

Mar 9, 2011

Not sure if the derived page is actually relevant to the problem here, but ran into an interesting gotcha on some code I'm working through at the moment.

I have a custom masterpage class, which derives from System.Web.UI.MasterPage so that it can be extended with additional useful properties. The page that that uses this masterpage has a declaration at the top (note the Page Title being set).

<%@ Page Language="C#" MasterPageFile="~/MasterPages/Landing.master" AutoEventWireup="true" CodeFile="Index.aspx.cs" Inherits="Index" Title="Welcome to the site" %>


In addition, the master page has stylesheet references in the head which are pulled from a CDN that is defined in a config file.

<head id="Head1" runat="server">
<link rel="stylesheet" type="text/css" href="<%= CDN %>/css/main.css" />
</head>

Now the example above obviously doesn't work, because the runat attribute in the head container means that the codeblock in the the link is static text, and renders as is, in the resulting html.

If I remove the runat attribute from head, the CDN works, but now I notice that the Title is no longer being set. If I debug, and try to access Page.Title in the Immediate Window, I get an exception:

// Using the Title property of Page requires a header control on the page. (e.g. <head runat="server" />).

So, is there a way to get the Page Title from the declaration, put my own title placeholder in the head and set it from the master page code-behind, or, is there a better way to dynamically set the CDN domain for the stylesheets? The only way I think I can do that is to build the entire html link tag(s) and append it to the header control, but I thought there might be a more elegant solution, so I'm asking here first.

View 2 Replies

State Management :: Dynamic Controls In A Page With Two Master Pages

Apr 12, 2010

I have a nested master page that I use for multiple pages. There is a ContentPlaceHolder that is used for only one page, but it is not shown until after the first postback and some validation. I was first trying to use static controls and set the Visible property on the ContentPlaceHolder to true after the postback and that did not work at all. Then was messing with the visible properties of the Individual controls inside the ContentPlaceHolder which also did not work. I have the EnableViewState set to false for the Page and each of the controls including the ContentPlaceHolder. Is there a better way to do this? I can post my code if need be just wanted to see if there was a better solution to this before I did.

View 4 Replies

Web Forms :: Master Pages And Adding Dynamic Text Fields To A Page From The Database

Jun 28, 2010

I am adding text fields to a page from the database. I set the .ID to match the record ID from the database. Of course becasue the text field is on the masterpage, when I grab the .ClientID, it is ctl00 contentMain$ctl00. what I don't get is where is my ID? If I set it to say AB how do I find the textbox by AB? I thought it should have AB in the ID somewhere. ID is nothing which I don't get either. I'm looping through the controls in a placeholder like this

For Each row In dtData.Rows()
Dim c As Control
For Each c In phTextRequired.Controls
If c.UniqueID = row("CustomFieldID").ToString() Then

Again though what is in the row() is say AB but the id is way off from that.

View 4 Replies

Web Forms :: How To Redirect To New Url Without Changing The Current Url

Feb 6, 2010

Any traffic comes to a page through any URL like [URL] should be redirected to

[URL] however the URL in the address bar should not change.It should not show [URL]

How to acheive this?

View 5 Replies

Changing QueryStrings In The URL Without Postback / Redirect / Refresh?

Jul 20, 2010

I have a page with some value like this:

[URL]

what I want to do is when the user enters values on the page I want to be able to change "valueA" and "valueB" in the URL without redirecting, refreshing or posingBack. Does anyone know how to do this?

View 7 Replies

C# Dynamically Changing Master Pages

Sep 11, 2010

You fetch the user's IP address and based on his/her country you redirect the user to a specific webpage. Now, how do you change the master page dynamically? This is how I am redirecting the user :-

Geolocation Error with IP Address 127.0.0.1

It's not like the user clicks some button or something and you then change the master page. I want it changed when the user is redirected, so how exactly do I go about it?

public partial class testClass: System.Web.UI.MasterPage
{
protected void Page_Load(object sender, EventArgs e)
{
if (redirected to site1)
{
Use this master page1
}
else
if (redirected to site2)
{
Use this master page2
}
}
}

So how do I check what SITE the user has been redirected to? Also HOW to apply the specific master page now that the user has been redirected?

I just need an idea how to go about it.

[EDIT] please check the code block below. How do I fetch the URL that the user has been redirected to? I actually need just the "iso3166TwoLetterCode" variable's value (see the link to my earlier question, please) and based on that will be changing the master page. I can't figure out how to fetch that value or even use that class (that's got this variable) in my testClass.

protected void Page_PreInit(object sender, EventArgs e)
{
if (user Has been redirected to www.site.in )
{
this.MasterPageFile = "master1.master";
}
if (user Has been redirected to www.site.fr )
{
this.MasterPageFile = "master2.master";
}
}

View 2 Replies

C# - Dynamically Changing Master Pages / Getting Thread?

Sep 13, 2010

I created this master page file and in its Page_PreInit added the code to change master page at run time after detecing a visitor's country:-

Now, while researching I came across this thread that says "Setting the master page in Page_PreInit event is against the design and spirit of MVC..what is this supposed to mean ???

If not this way, how else am I supposed to change master pages at run time???

View 1 Replies

Changing Urls Form With Master Pages

Jan 13, 2010

We've had a requirement from a client to move a site that is running on it's own domain to a subfolder of another app.

I've acheived this using ISAPI rewrite proxying.

However, there is one form that does a post back in the site. The generated url for the action from ASP.NET is "/sign-up.aspx?". This sends the postback to the root of the site.

I want to change this to "sign-up.aspx?" (no leading slash). This would be fine if I wasn't using Master pages as I could get a reference to the form and change it's action (this is .NET 3.5 SP1). I've tried to use the following code in my control to get a reference to the form but it doesn't seem to do anything. It finds the form but the action is not set to the value.

HtmlForm form = ControlLocator.FindControl<HtmlForm>(Page.Master.Master, "form1");
form.Action = "sign-up.aspx?";

This is in Page_Load and ControlLocator.FindControl is a port of this http://www.west-wind.com/Weblog/posts/5127.aspx

View 3 Replies

How To Implement Dynamic Changing Password

Mar 22, 2010

What is the Best practice of dynamic changing password for this scenario?

The scenario is:

There are three web apps using ASP.NET.

App1 checks the passwords of app2/app3 to authenticate the identity, and if app2/app3 is authenticated then app1 is allowed to receive information from App2 and App3.

And app1 has to change the passwords of app2/app3 every two hour for security reason.

Is it possible that there is a way to implement this scenario without app1 saving the passwords of app2/app3 for security reason?

Or is there any best practice for dynamic changing password scenario?

View 1 Replies

How To Redirect Non Aspx Pages

Jun 17, 2010

I am using a shared hosting so I can't touch IIS, but is there anyway I could do in Global.asax or web.config that would redirect links like mysite.com/folder/ to a specific page?

View 1 Replies

String - Changing The Culture Based Off Of A Dynamic Value?

Mar 17, 2011

I have a web application that tracks financial data. I would like to have the option where a user can edit their currency via dropdown. The different currency types will be held in a database and a user can then select which currency they wish to use. The easiest way I can see doing this would be to check what the currency value is and dynamically change the culture to match the currency, thus I could continue to use the string str = String.Format("{0:C}", revenue);format. I am open to other suggestions but this just seemed the most logical to me.

View 2 Replies

C# - Gridview Dynamic Changing Cell Background

Sep 17, 2010

I have a griview which is bounded to a sqldatasource and changed dynamically. How do I change the background cell color based on the value? e.g., 0-0.5 green, 0.5-1 red, sth like that.

<asp:GridView ID="grid1" runat="server" AutoGenerateColumns="False"
DataSourceID="SqlDataSource3">

View 2 Replies

ImageUrl Is Not Changing On Dynamic Added Image?

Dec 30, 2010

I am adding a set of images on Page_Init, and on some button click I want to update those images. For some reason it doesn't work. why?

This is my code:

[Code]....

I can see that ButtonSubmit finds the correct control and changes its property, but on the response to the client I still see the old image.

View 1 Replies

Web Forms :: Changing User Control Properties In Aspx Pages?

Feb 25, 2011

I have a simple user control(.ascx) with a asp label inside of it. Using the codebehind(C#) from a aspx page, how can I change the text of that label? I have tried using public classes in my user control and a few other things that I could think of off the top of my head. Can somebody give me a quick example of how this would be done?

View 4 Replies

Security :: Redirect To Specific Pages After Log In

Mar 24, 2010

I'm no programmer. I am a student majoring in Business Information Systems. My capstone course requires me to develop a web-enabled database that will allow a company to track their projects. I have set it up this far using the 3.5 dynamic data page. My database is fine, however I need to set it up so that Admins can view the entire site and have the ability to edit, view, and delete items, and where users can only edit projects that they are assigned. Is what I'm looking to do possible?

View 4 Replies

Vb.net - Redirect To Different Pages If Use Two Imagebuttons In Gridview1?

Jan 2, 2011

I have a asp.net webform i m working in VB ..

I have a gridview with template field status ..i have taken two image button in same template field in Item Templates ...

i want when i click on image button1 i redirect to default.aspx ?

and if i click on Imagebutton2 i redirect to default2.aspx ?

I have did this ... but ...

Me.Response.Redirect("Select_seats.aspx?" & "s_no=" & GridView1.SelectedRow.Cells(9).Text.ToString & "&" & "journey=" & Label6.Text & "&" & "seater=" & label4.Text & "&" & "sleeper=" & label2.Text & "&" & "service=" & lab5.Text.ToString)

The problem with this is :

that the both image button would be redirect to same page .... if i taken this query in gridview select index changed ?

View 1 Replies

Permanent Redirect From Old .net Pages/site To PHP Pages/site

Jan 29, 2011

I picked up a new-to-me client who had a site built in ASP.net (which I do not host).I converted the site to PHP, which worked fine.I want to set up redirects for all the pages he had in the old site (it was a small site, so there was only 8 pages).As an example, the ASP.net url for the Contact page was www.domain.com/Contact - it is now www.domain.com/Contact.php (and so on).

For 301 redirects from one PHP page to another I normally use the .htaccess file:

Options +FollowSymlinks
RewriteEngine on
#custom redirects
rewriterule OldPage.php http://www.domain.com/NewPage.php [R=301,L]
#end custom redirects

What can I do to redirect these ASP.net pages to the new PHP pages?They are all static pages with no dynamic content.

View 1 Replies

How To Redirect Logged In Users To Separate Pages

Apr 21, 2010

I have basic login functionality implemented using SQL Server and the LoginView, LoginStatus, and LoginName controls.I have two roles defined: one for Administrators and one for Users.I have two users defined, one for each role. I would like to redirect those authenticated as users to one page and those authenticated as administrators to another. Do I need to define RoleGroups to do this? Is there a good, basic way to accomplish this? I'm not sure what to do next.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved