Error While Opening A Document In Custom Grid / The Message Received From The Server Could Not Be Parsed
Apr 1, 2010
I have a grid within another grid. In the detail grid I have image button for which I am giving the URL of documents in the source itself. On clicking on Image button, document can be opened for which I am using a Handler. The code for opening the document is written in the handler.This code is as below:
[code]....
The document can be opened when clicked on Image Button. but, the problem is taht after opening the document, I am unable to perform any other action in the grids.... Other actions like...selection in checkboxes(master grid contains few check boxes),other link buttons in detail grid....etc etc...I am getting the following errr:
PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled
This is because after opening any document,for any action again Handler is being called.
View 1 Replies
Similar Messages:
Nov 11, 2010
I have the following source code, but it is not working properly. All 3 panels popup OK. but in Panel3 I have a RadioButtonList that changes the date in the BeginDate and EndDate dropdowns. But what happens is that when the posback happens Panel 2 Reappeals overlapping Panel3 just a little. When I click on continue I get the following error.Microsoft JScript runtime error: ys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near '<script>window.open('.Can anyone help me figure out this error. My coding might not be right? Here is my code.
[Code]....
View 16 Replies
Aug 16, 2010
I have used asp.net wizard inside update panel. Well in this, i have used combo box in second wizard and i have assigned integer character to combo. This gives an error while i press next button. But this works in 1st wizard page fine if i load it for the first time. For this code is as below:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="WizardTest.aspx.cs" Inherits="WizardTest" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[code]...
View 7 Replies
Mar 20, 2011
I am getting the following error using an update panel with a gridview.
Microsoft JScript runtime error:Sys.WebForms.PageRequestManagerParserErrorException:
The message received from the server could not be parsed.Common causes for this error are when the response is modified by calls to Response.Write(),response filters,HttpModules,or server trace is enabled.
I have looked at all the "fixes" for this and none of them seem to be working.It works just fine on page load but when I click my async button,One row of the grid processes(I can look in the javascript debug) but after the firstrow is processed,I get the above error at this line.
try {
_this._webRequest.completed(Sys.EventArgs.Empty);
}
finally {
if (_this._xmlHttpRequest != null) {
_this._xmlHttpRequest.onreadystatechange = Function.emptyMethod;
[code]...
I am completely stumped here,
Here is my AJAX Response from FireBug
14008|updatePanel|ctl00_ContentPlaceHolder_UpdatePanel1|
<table border="0" cellpadding="2" cellspacing="0" width="100%" id="Table3">
<tr>
[code]...
What I do in this code is convert a BLOB value from a database and store it in a string in a custom object.What seems to be happening is that there are odd characters being put at the end of the string.Here is what I am doing to convert the data
byteBLOBData = (Byte[])(row[3]);
row["data"] = System.Text.Encoding.UTF8.GetString(byteBLOBData);
[code]...
View 1 Replies
Jul 27, 2010
The error is this:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.Details: Error parsing near '<!DOCTYPE html P'.
It appears in both FF and IE so far, and only happens on the live servers.
It occurs within partial (or attempted partial as they stop working and don't update) postbacks within an update panel on a form that is on every page. It doesn't always do it, but once it's broken, it's consistent. I have a suspicion that it kicks in after the pages in question have been posted back to by another page, but I'm not 100% about this. This form is absolutely integral to the function of the site.
View 3 Replies
Dec 10, 2010
Code below is ready to test: MVC3 Problem is when I enable e.preventDefault(); than individual errors not popping up infront of each control generated by ValidationMessageFor and showing up when e.preventDefault(); is enabled. All the errors are working properly but once code processed and Successful message returning from server side make the whole page POSTBACK/REFRESH How I stop the whole page from Refresh/Postback if e.preventDefault(); is enable and get SUCCESS message from server?
[Code]....
View 3 Replies
Feb 16, 2010
i am using the following code to open a word document from asp.net application
[Code]....
but i am unable to open it.the error is "the file could not be found" but if i replace
Response.Cache.SetCacheability(HttpCacheability.NoCache);
with
Response.Cache.SetCacheability(HttpCacheability.Public);
i am able to open and save the file
View 6 Replies
Oct 6, 2010
when I save the file that is returned by Handler and try to open it I get the following message:"The file you trying to open, 'Users.xls', is in a different format than specified by the file extension. Verify that the file is not corrupt and is from a trusted source before opening the file. Do you want to open the file now?" How to fix this? Here the code of the handler:
[Code]....
View 3 Replies
Feb 7, 2011
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
View 4 Replies
Oct 2, 2010
created website in VS2008 with createuser and login page.I was able to run the createuser page, but while trying to run the login page i received error:Server Error in '/' application.resources not found.
View 1 Replies
Jan 16, 2011
I have tried in many way but the error message for custom validator is not shown in validation summary but it(ValidationSummary) shows error message for every other type of validator.
[code]....
View 1 Replies
Jan 30, 2011
I have used the code below to send the html formatted email
[code]
BUT the problem is when i the message received it delivered as it is:
<b>Hi</b>George<br /><b>Hw r u/b>
View 2 Replies
Jan 3, 2011
Hope this is the correct forum for this question. I am using VWD 2010 an have a web project and get the following error upon execution:
Parser Error Message: Unknown server tag 'custom:AjaxValidator'.
My code is as follows in the .cs file:
[Code]....
[Code]....
View 1 Replies
Mar 7, 2011
I have a site that is running on a Windows Server 2008 machine with IIS 7.0, when I try to open it with Visual Web Developer 2010, it says the following:
error: unable to open site: ... The Web server does not appear to have FrontPage Server Extensions installed.
Looking on the server Frontpage Extensions 2002 are installed, so what could be wrong?
The thing is, I used to be able to open the project and work on it, etc...
Open Website -> Remote Site -> Enter remote site name -> tries to open & error above!
View 1 Replies
Jul 2, 2012
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
View 1 Replies
Apr 19, 2010
I have forgotte password page in my application,page have one textbox to insert email address,when user click on submit button if inserted email address (i.e. abc@gmail.com) does not exits in DB it will give custome error message like "Email ID not available".after that suppose user will enter inproper email address (aaa#gmail.com) than client side validation for regular expression will file "Email id not valid",at same both message be on screen,now i want only one message at a time.so please can you help me for same
View 2 Replies
Jun 15, 2010
i m using Telerik grid to present memos received by user below is the code
[Code]....
where i m binding third column (Subject) my intention is to make an ActionLink where subject is the display text and i want a dynamic ID coming from <#=MemoID#>. memo id is working fine and gives me a link with dynamic Memo IDs. the problem is with the subject i.e ("<#=Subject#>") is rendered as it is on the screen without mapping to the actual subject of the memo. i have also tried ("<%#=Subject%>") but to no gain.
View 12 Replies
Jan 19, 2010
I want to print the document in the ASP.NET without opening the document, i know the path and file name, Is there any option available in ASP.NET as in windows application
View 1 Replies
Nov 3, 2010
I have a requirement that one of multiple fields is required. Using custom validator the even fires, false is returned, but no error message is display and the form validates. What am I missing? I have tried with and without ValidationSummary.
<asp:CustomValidator ID="CustomValidator1" OnServerValidate="validatePhone" EnableClientScript="false" runat="server" ErrorMessage="Home or Cell Phone is Required" ></asp:CustomValidator>
<asp:ValidationSummary ID="ValidationSummary1" DisplayMode="BulletList" runat="server" ForeColor="Red" Font-Size="X-Small" Font-Bold="true" />
protected void validatePhone(object sender, ServerValidateEventArgs e)
{
e.IsValid = string.IsNullOrEmpty(txtCellPhone.Text) && string.IsNullOrEmpty(txtHomePhone.Text) ? false : true;
}
View 3 Replies
Mar 3, 2010
It is possible to create a PDF document in memory with iTextSharp that gives the user a choice to "open" or "save"?, and if it opens then it opens in a browser window.
At the moment the only I have save it to disk.
EDIT:
ok I've got it sussed. I did end up having to write the file to a folder, but it is only temporary as gets overwritten every time. Here is the solution for what it's worth:
private void GeneratePDF() {
var doc1 = new Document();
string path = Server.MapPath("~/pdfs/");
string filepath = path + "Doc1.pdf";
PdfWriter.GetInstance(doc1, new FileStream(filepath, FileMode.Create));
[Code]....
View 3 Replies
Jan 17, 2011
I have a custom validator:
<asp:CustomValidator ID="QuestionValidator" runat="server" ErrorMessage="Please select an option" ClientValidationFunction="QuestionValidator_ServerValidate" OnServerValidate="QuestionValidator_ServerValidate" ValidateEmptyText="true"></asp:CustomValidator>
[code]...
When I run the page, there is no validation and no error message. Please can you point out where I am going wrong, I'm suspicious it is at Page.Master.FindControl("form1").Controls.I have previously done such validation by looping through controls via form1.controls but this is unavailable as the page uses a form passed down via the master page.
View 4 Replies
Aug 10, 2010
i ahve one custvalidator control in that i have used OnServerValidate="ValidateDateRange"
ValidateDateRange is function i have written in serverside now i want raise error message without
postback operation like (clientside validation) if that ValidateDateRange function returns
false .
View 4 Replies
Oct 8, 2010
I have an ASP.NET 3.5 Site where, in some places, I am checking if the currently logged on Active Directory user is in a certain AD Security Group. In the Page_Load I'm doing something like this:
if (isInADGroup(UserGUID))
{
//proceed
}
Now I was wondering, couldn't I just create a Custom Attribute, like some of MVC's security attributes, which runs this check and cancels the execution or displays an error message?
View 1 Replies
Nov 1, 2010
We have this great asp.net web application that generates word documents (wordprocessingML) and saves them to the file system on the server. We are running IIS 6.0. I would like to know the best way to allow the user to click a link or something so they can open the document from the browser. I have been experimenting with the Microsoft.Office.Interop.Word object, but am getting an error when I try to active the application object. I don't know if using this object is the best approach or if I should be doing something else.
View 1 Replies
Feb 9, 2010
I have an aspx page with lots of controls on it. I am using a custom validator control (with the serverside validation). Is there a way to display the error message on the validation summary without writing Javasccript. I am a beginner in .NET and am not fluent in Javascript. This is the custom validator HTML
<asp:CustomValidator ID="CustomValidator1" runat="server" ErrorMessage="Invalid Date"
ControlToValidate="txtDate" OnServerValidate="ValidateDate_ServerValidate" ValidationGroup="vgSetUp"
></asp:CustomValidator>
This is the utility method am trying to validate for the entry on the UI, so that it takes dates only in these described formats If the user enters date in any other format, this method returns returns the Datetime.Mivalue(1/1/0001)
public DateTime GetFomattedDate(string dateString)
{
try
{
string[] formats = {
"MMddyyyy", // These are the accepted date formats for the UI
"MM/dd/yyyy",
"M/d/yyyy",
"yyyy/MM/dd",
"yyyy/M/d"
};
DateTime EffDate = DateTime.MinValue;
if ( DateTime.TryParseExact(dateString,formats, null, System.Globalization.DateTimeStyles.None, out EffDate))
{
return EffDate;
}
}
catch (Exception)
{
throw;
}
return DateTime.MinValue;
}
This is my customvalidator event handler(code behind)
protected void ValidateDate_ServerValidate(object source,servervalidate eventargs args)
{
args.IsValid = GetFomattedDate(args.Value) ==DateTime.MinValue? false:true;
}
I am able to validate it properly, but I cannot display the error message in the validation summary along with other messages. Anyone who is expert on Javascript can Help with the javascript function?
View 5 Replies
