Get A Custom Error Page To Mail The Error Message / Generate A Custom Error Page With The Error Message

Feb 7, 2011

I was wondering if someone could point me in the right direction:

How do I generate a custom error page with the error message and get it to mail me that error message?

Is there a good tutorial out there that someone could point me 2.

View 4 Replies

Similar Messages:

Web Forms :: Display Complete Exception Details And Error Message On Custom Error Page

Jul 2, 2012

I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.

<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>

And even i tried in Global.asax page in Application_Error() method like below

 Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();

And in my Error.aspx.cs page i have placed a label and i have written code like this

protected void Page_Load(object sender, EventArgs e)         {

But it is not getting redirected my error page and not displaying anything on it.

View 1 Replies

Web Forms :: How To Pass Exception Message To Custom Error Page

Apr 12, 2010

I am trying to passing Exception info tpa custom error page that I have created, and I'm looking for the best way to do so.I ended up creating a session object on my Global.asax page, and I pass the error data to the session object during the Application_Error event, but it throws it's own exception prior to working.


I have also updated my web.config with my error page that I would like to pass session object data to:


View 2 Replies

Forms Data Controls :: Add An Update Command To Page And Run The Page Getting Error Message - Server Error In '/MYApplication?

Feb 22, 2010

When I add an update command to my page and run the page I get this error message

Server Error in '/MYApplication.

Incorrect syntax near '-'.Must declare the scalar variable "@recnum".

Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '-'.Must declare the scalar variable "@recnum".

Source Error:


Stack Trace: [Code]....

Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

Here is my code


View 4 Replies

State Management :: Error On Page And "Unknown Error - Code 0" In Error Message?

Dec 6, 2010

I have a serious problem with "Error on Page". The error message points to line number 939, char 13. In my code behind (C#) in line number 939 is only an obsolete method found which is no longer called. The aspx file has only 339 lines. What the heck is line number 939?The Webapplication allows a special user group to change some group memberships for members of another user group in Active Directory. The App handles 3internal DataViews derived from corresponding DataTables as DataSource for 3 GridViews and some other internal lists with objects (List<obj>).

It uses windows authentication to get current users credentials and his membership in the "Operators" group. This credentials will be passed-through to allow the process managing group memberships in active directory.After starting the App in browser it seems to work fine. But after an indeterminated time it doesn't longer respond. After each click on buttons (or link buttons) you only can see the message "Error on Page" in the browsers status bar below.I played with session timeout, storing the DataTables in session variables, without success.

Last week I found this article here: [URL]" and I addedEnableEventValidation="false" ViewStateEncryptionMode="Never"
to Page declaration. However, at some point the the server does not respond. Each time the worker process on webserver recycles it seems the application turn to wrong state. Might be important: All controls including GridViews are embedded in an AJAX UpdatePanel. How to get a better error message? Debugging is enabled and Custom Error handling On, Off or Remote Only brings the same result as described.

View 3 Replies

Why The Error Message For Custom Validator Is Not Shown In Message Box

Jan 16, 2011

I have tried in many way but the error message for custom validator is not shown in validation summary but it(ValidationSummary) shows error message for every other type of validator.


View 1 Replies

MVC :: Display Friendly Error Message On Page Without Redirecting To Error.aspx

Mar 8, 2011

All the examples and websites i have looked at redirect a user to the error.aspx page when an error occurs. How do you just display a friendly error message on the page the user is viewing saying something like "Sorry unable to do whatever" I've tried using a try catch block on my class that executes a stored procedure and put another try catch on the controller, but this does not work and i still get the default error message (System.InvalidOperationException was unhandled by user code) My code is below:


So how can i just return ViewData["SqlError"] message in page.

View 7 Replies

MVC :: Error In Subview Master Page Not Show The Custom Error Page On Entire Page ?

Oct 28, 2010

I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..


Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?

View 4 Replies

Web Forms :: Session_Start Executes Again After An Error Occurs (when Going To Custom Error Page)

Mar 7, 2011

I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.

In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).

void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session ( Session["LastException"] = ""; }}

View 3 Replies

No Error Message Displayed For Custom Validator?

Nov 3, 2010

I have a requirement that one of multiple fields is required. Using custom validator the even fires, false is returned, but no error message is display and the form validates. What am I missing? I have tried with and without ValidationSummary.

<asp:CustomValidator ID="CustomValidator1" OnServerValidate="validatePhone" EnableClientScript="false" runat="server" ErrorMessage="Home or Cell Phone is Required" ></asp:CustomValidator>
<asp:ValidationSummary ID="ValidationSummary1" DisplayMode="BulletList" runat="server" ForeColor="Red" Font-Size="X-Small" Font-Bold="true" />
protected void validatePhone(object sender, ServerValidateEventArgs e)
e.IsValid = string.IsNullOrEmpty(txtCellPhone.Text) && string.IsNullOrEmpty(txtHomePhone.Text) ? false : true;

View 3 Replies

Error On Sending The Mail Message To Message Queue?

Aug 7, 2010

I am trying to send the message(complex type) to the message queue.I am getting the error,ETravel.Web, Version=, Culture=neutral, PublicKeyToken=null' is not marked as serializable.below lies the code for that.

public void QueueMessage(EmailMessage message)
Message msg = new Message();
msg.Body = message; [code]...

View 1 Replies

Custom Validator Not Firing (No Error Message, But No Validation)

Jan 17, 2011

I have a custom validator:

<asp:CustomValidator ID="QuestionValidator" runat="server" ErrorMessage="Please select an option" ClientValidationFunction="QuestionValidator_ServerValidate" OnServerValidate="QuestionValidator_ServerValidate" ValidateEmptyText="true"></asp:CustomValidator>


When I run the page, there is no validation and no error message. Please can you point out where I am going wrong, I'm suspicious it is at Page.Master.FindControl("form1").Controls.I have previously done such validation by looping through controls via form1.controls but this is unavailable as the page uses a form passed down via the master page.

View 4 Replies

Web Forms :: How To Display Custom Validator Error Message

Aug 10, 2010

i ahve one custvalidator control in that i have used OnServerValidate="ValidateDateRange"
ValidateDateRange is function i have written in serverside now i want raise error message without
postback operation like (clientside validation) if that ValidateDateRange function returns
false .

View 4 Replies

C# - Custom Attribute In .NET For Page_Load / Displays An Error Message?

Oct 8, 2010

I have an ASP.NET 3.5 Site where, in some places, I am checking if the currently logged on Active Directory user is in a certain AD Security Group. In the Page_Load I'm doing something like this:

if (isInADGroup(UserGUID))

Now I was wondering, couldn't I just create a Custom Attribute, like some of MVC's security attributes, which runs this check and cancels the execution or displays an error message?

View 1 Replies

Custom Error Page For Http Error 503 / How To Fix It

Feb 16, 2010

I need to send a Customized Error page for 503 Errors produced by my website. I have tried to simulate the condition by switching off the application pool (doesn't work) and by flooding my application with requests. Even though IIS sends me the default 503 error page, and even though I have tried setting a Custom URL in IIS and ASP.NET for this error code, it still returns me the default 503 error page.

View 3 Replies

Web Forms :: Displaying Custom Validator Error Message On Summary?

Feb 9, 2010

I have an aspx page with lots of controls on it. I am using a custom validator control (with the serverside validation). Is there a way to display the error message on the validation summary without writing Javasccript. I am a beginner in .NET and am not fluent in Javascript. This is the custom validator HTML

<asp:CustomValidator ID="CustomValidator1" runat="server" ErrorMessage="Invalid Date"
ControlToValidate="txtDate" OnServerValidate="ValidateDate_ServerValidate" ValidationGroup="vgSetUp"

This is the utility method am trying to validate for the entry on the UI, so that it takes dates only in these described formats If the user enters date in any other format, this method returns returns the Datetime.Mivalue(1/1/0001)

public DateTime GetFomattedDate(string dateString)
string[] formats = {
"MMddyyyy", // These are the accepted date formats for the UI
DateTime EffDate = DateTime.MinValue;
if ( DateTime.TryParseExact(dateString,formats, null, System.Globalization.DateTimeStyles.None, out EffDate))
return EffDate;
catch (Exception)
return DateTime.MinValue;
This is my customvalidator event handler(code behind)
protected void ValidateDate_ServerValidate(object source,servervalidate eventargs args)
args.IsValid = GetFomattedDate(args.Value) ==DateTime.MinValue? false:true;

I am able to validate it properly, but I cannot display the error message in the validation summary along with other messages. Anyone who is expert on Javascript can Help with the javascript function?

View 5 Replies

Javascript - Dynamic Error Message For Custom Validator Clientside?

Mar 22, 2011

I am using a custom validator to call a javascript function for validation. My problem is that I need to be able to change the error message dynamically. Here is the code:

<asp:CustomValidator ID="CustomValidator1" runat="server" ClientValidationFunction="fcnValid1"
ErrorMessage="" Display="None" ValidateEmptyText="True">


View 1 Replies

IIS Configuration :: Show Custom Error Message When Website Is Under Maintenance

Sep 17, 2012

How to show page Error msgs wen user tries to open the page , while tat page is under uploading on the sever?

View 1 Replies

Error While Opening A Document In Custom Grid / The Message Received From The Server Could Not Be Parsed

Apr 1, 2010

I have a grid within another grid. In the detail grid I have image button for which I am giving the URL of documents in the source itself. On clicking on Image button, document can be opened for which I am using a Handler. The code for opening the document is written in the handler.This code is as below:


The document can be opened when clicked on Image Button. but, the problem is taht after opening the document, I am unable to perform any other action in the grids.... Other actions like...selection in checkboxes(master grid contains few check boxes),other link buttons in detail grid....etc etc...I am getting the following errr:

PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled

This is because after opening any document,for any action again Handler is being called.

View 1 Replies

C# - How To Access The Source Error, Source File And Line Number Of An Exception To Use In A Custom Error Page

Jun 18, 2010

Basically I want to take the following:And make it match the styling of the rest of the application.I am creating a custom error page in my C# based project and I want it to be able to show the same information that is displayed in the ASP.NET default error page. From fiddling with reflector I can see that this is generated through HttpException.GetHtmlErrorMessage() but when I try to use this in my exception it returns null.

View 3 Replies

Error - Compiler Error Message - CS1525: Invalid Expression Term

Apr 22, 2010

<%# Eval("NAME").ToString() == "Edit" ? %>
<asp:ImageButton ID="imgEdit" runat="server" ImageUrl="../icons/icoedit.png" CommandName="Edit" CommandArgument='<%# Container.DataItemIndex %>' />

Error: Compiler Error Message: CS1525: Invalid expression term ',

View 2 Replies

Web Forms :: Handle Custom Errors Using Custom Error Page?

May 7, 2015

I want put custom error page in my website so I wrote below code in web.config

<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />

is it correct?

or I should put other code?

View 1 Replies

Configuration :: Getting An Error "Parser Error Message: Could Not Load File Or Assembly 'System.Web, Version=4.0?

Aug 25, 2010

I have created an application which runs fine in VS2010.Now i am trying to host that application using inetmgr.When i try to browse the page from inetmgr content view then i get the "Parser Error Message: Could not load file or assembly 'System.Web, Version=, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified".If i browse the page from VS i am able to do it.I am not able to host the app. may be the reason is the above stated error.

View 1 Replies

Configuration :: Error Message:An Error Occurred On The Server When Processing The URL?

Sep 21, 2010

I just got a new computer with Windows 7 and installed IIS, including support for ASP. I am running everything locally on my computer. A simple statement like <% response.write time() %> works fine, so ASP is working, However, when I try to run a page that accesses a database (at least, I am assuming that that is the root of the problem) then I get the unhelpful error message:An error occurred on the server when processing the URL. Please contact the system administrator.If you are the system administrator please click here to find out more about this error. I have no idea where to begin. the database is in the same location as it was on with my old computer, and I have adjusted permissions to the database so that everyone except Creator Owner has full permissions - for whatever reason I am not able to change Creator Owner permissions.

View 1 Replies

Getting Redirection To Custom Error Page Using Custom Errors

Mar 24, 2010

Here's my Application_OnError event sink in global.asax.vb:

Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub

You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'

Here's the relevant web.config entry:

<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />

So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.

We've also tried this:

Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub

Which unsuprisingly doesn't work either.

View 1 Replies

Copyrights 2005-15, All rights reserved