I am creating an HTML document which we are then pushing out to MS Word using a "application/msword" content type. This works so far except that the files open in Word with Web View. Once Normal View is selected all works fine. Is there any way to force Word to open with Normal View instead of Web View?
View 1 RepliesThe purpose is to generate proposal documents that can manually be edited in Word after the fact, but before sending them out to the customers.
Much proposal content would be drawn from existing HTML website content (backing CMS) and also some custom (non-HTML) injection for certain scenarios. Of course the conditional logic could go into server-side ASP.NET to vary the content appropriately.
I'm open to 3rd-party tools if raw manipulation of the Word API is arduous. In fact a good 3rd party tool might be the answer.
I have stored some word file in a file on the server.
Now i wish after the click on the link the document should be viewed on the same page.
When I put a part of my form in a partial view, all form parts get unobstructive syntax except the form elements in the partial view. The only way I found how to "apply" the unobstructive syntax, is by starting another form inside the partial view.
@using (Ajax.BeginForm("SubmitHandler", new DefaultAjaxOptions()))
{
@Html.EditorFor(m => m.Name)
@Html.Partial("MyPartialView", Model)
}
PartialView:
@Html.TextBoxFor(m => m.SomeContent)
<input class="text-box single-line" data-val="true" data-val-required="This field is required." id="Name" name="Name" type="text" value="">
<input id="SomeContent" name="SomeContent" type="text" value="0">
So only the input element from the View has the unobstructive syntax and the partial view hasn't... Is there a way to apply unobstructive syntax inside a partial view, wich doesn't require you to begin a new form?
I'm hoping this is an easy one...I'm using Microsoft.Office.Interop.Word to convert uploaded word documents into previewable html files. I haven't implemented it fully, but I've played around with it enough that I think I have a plan that will work... My question revolves around
[Code]....
I'm not in love with the idea of opening word and closing it everytime there's an upload (which I hope is a lot of the time) I'd like to make this a shared object that loads at application start. I have 2 questions
that go along with this. 1. I imagine that winword could lock up and that would be a problem, right? 2. to save a document I use wordapp.ActiveDocument, this could have an issue as a shared object, right? I think I'm talking myself right out of this...
Can I Inherit a view of Asp.net mvc2 from normal asp.net master page
View 1 RepliesI have a website consisting of an index.html, a number of style sheet files as well as some javascript files. Then I needed a way for this site to communicate efficiently with a Microsoft SQL Server, so I was recommended to use the MVC framework to facilitate that kind of communication. I created the C#.net controller code needed to output the necessary information from the database using URL parameters, so now I am trying to put the whole web-site together inside the MVC framework.
View 2 RepliesDoes asp:Image tag perform faster than normal HTML img tag? I have 20 images to show on a web page (tiny images) and I have no idea which one to use.
View 5 RepliesCan I Inherit a view in asp.net mvc2 from normal asp.net master page
View 2 RepliesI am using the following in the index page of a normal view.
Index
Index
User Listing
I am using IE8 browser. I would like to Lock column header of gridview in IE 8 Normal View. I can lock in In compatibility View . I could not Lock In Normal view of IE8 Browser. I have developed Asp.net Application(c#) usingNote: Gridview column Header is dynamically loaded as per Client Requirement.
View 1 RepliesI've these codes in my DATABASE in other words it's HTML. I tried these stuff:
<div runat="server" id="div1" visible="false">
<asp:Literal ID="literal1" runat="server" Text="" />
</div>
I tried in C# code behind:
div1.InnerText = contents;
div1.InnerHtml = contents
literal1.Text = contents;
But is still doesn't render well. I displays the original values in stead of a table and cells and columns. colours etc. etc....
What am I missing?
All these HTML's are in DABASE.Column e.g. column "Contents"
e.g.
"& lt;p class=& quot;MsoNormal" style= "color: #339966;"><"
;" ;> ;< ;strong > ;&l
ot; > ;& ;nbsp; < ;/span >< ;/p >
I've put (spaces between & and gt above code otherwise it was not showing in stackoverflow.) The HTML sysntaxs are correct because it's created by an HTMLEDITOR.
I need to process surveys. I have modelled them in SQLServer, just need to generate the forms to input it.I have nested SqlDataSource/DataLists. The outer gets the questions and the inner gets the various options as a plain HTML radio buttons. I can't use ASP.NET radio buttons because of a bug with them inside itemtemplates not mutually exclusive http://support.microsoft.com/default.aspx?scid=kb;en-us;316495Anyway, so now I need to know the which radio buttons were selected so I can insert the values in the database. What is the best way of doing it?
View 12 Replies i'm attempting to set regular html checkbox's checked value based on if a master asp checkbox is checked or unchecked. The normal html checkbox is located in an asp repeater control that is populated in the page load event.
MAIN .ASPX PAGE
<asp:CheckBox ID="ChkMaster" runat="server" OnCheckedChanged="ChkMaster_CheckedChanged" AutoPostBack="true" />
[code]...
In my .aspx.cs I have a code that reads a .xml file and I deserialize the xml into an object called Post. Problem is that in my .aspx page I have a div and I want to fill in the content of this div from code behind using the html generated from the code behind.. How can I do this?
View 3 Repliespublic void pdfgenforffd(TextBox TextBox3, HiddenField HiddenField1, HiddenField HiddenField4, AjaxControlToolkit.HTMLEditor.Editor Editor1)
{
HttpContext.Current.Response.Clear();
HttpContext.Current.Response.ContentType = "application/pdf";
[Code]....
i am using the above code for pdf generation from html text in HTMLEditor(ajax control). If i hardcode a table with each column of different width, into HTMLEditor text than while generating pdf the column get devided equally i.e all column have fixed size on pdf even if i specify some custom width for each column.
I want to generate pdf that can convert html to pdf,also divide table column with specified width. How to do it?
I have a route (the first one listed) which looks like this:
routes.MapRoute(
"TopicRoute", // Route name
"forums/{forumSlug}/{topicSlug}", // URL with parameters
new { controller = "Forums", action = "Topic"} // Parameter defaults
);
I can browse to: /forums/my-forum/my-topic and the page loads fine. Yet I have a Html.ActionLink that looks like: @Html.ActionLink(item.Title, "Topic", new { forumSlug ="my-forum", topicSlug = "my-topic" }) And it won't generate the correct link syntax for me? It generates: <a href="">My Topic</a>
I've a WebForm with a HTML table and I need to add hyperlinks in a column. The amount of hyperlinks depend on the rows in a table.Can someone tell me how can I do that?
View 2 RepliesI need to get data from a database and I need to spit out this data in html formatk using my command line app. For this I am planning to use some sort of template-engine. I was wondering if there is anything in .NET that can do this for me?
The best option would be if I could reuse the asp.net mvc template engine (razor) in my app, this way I should not need to reinvent the wheel.
I have a GridView inside of an UpdatePanel and the buttons for edit and delete into a templatefield
For the delete button, I also have a modalPopup extender and a confirmButtonExtender, due to the problem of the pannels flashing momentarily (and that is very ugly) I have created a css class with display:none
for the delete button I have created a javascript function called changeVisibility(id) to change the visibility
Here ir some code:
[Code]....
The problem is that when I execute the page, imagebutton onclientclick appears like this:
onClick=""
why is asp.net not processing correctly that, and, if you know another way to hide the panels before they flash on startup,
Possible Duplicate: asp.net mvc: why is Html.CheckBox generating an additional hidden input
I'm rendering a checkbox in an asp.net mvc app, and the control is also outputting a hidden field like this:
<input id="blah-64" name="blah-64" value="true" type="checkbox">
<input name="blah-64" value="false" type="hidden">
Problem is, when I post the form, the form key "blah-64 returns "on, off".
Why is this?
Is is possible to force Grid view edit mode without using object data source, I set EditIndex, but the Edit template is never shown till I change the binding to ObjectDataSource
View 2 RepliesSo I have a repeater control that lists a bunch of information for each staff member...one after another. Problem is when I try to print this list I have staff records starting out in the middle of the page. I would like to solve this issue by forcing a page break at the beginning or end of each record/repeater item. How can I accomplish this?
<body>
<form>
<asp:repeater>
<itemtemplate>
<table>
<bunch of html>
</bunch of html>
</table>
</itemtemplate>
</asp:repeater>
</form>
</body>
If I drag a control from the toolbox in Visual Studio (2008+SP1) into an ASPX page I get a proposal for an ID: <asp:Button ID="Button1" runat="server" Text="Button" /> That's nice and helps not to forget to assign an ID. Most of the time I rename the ID like: <asp:Button ID="MySpecialButtonForSpecialTask1" runat="server" Text="Button" />
Now I have a task 2 (3, 4, ..., n) and need a button "MySpecialButtonForSpecialTask2". So I copy and paste the first one with ID="MySpecialButtonForSpecialTask1". That's the result: <asp:Button ID="Button1" runat="server" Text="Button" /> That's not nice since I need to change now "Button1" to "MySpecialButtonForSpecialTask2" but I would prefer to change "MySpecialButtonForSpecialTask1" to "MySpecialButtonForSpecialTask2". Is there any setting or trick in VS to prevent assigning new IDs after copy and paste?
I'm not looking for the option "Tools > Options > Text Editor > HTML> Miscellaneous > Auto ID elements on paste in Source view" since it also turns off creating IDs for controls inserted from the toolbox. I only would like to switch off this when copy & paste.
I am developing a custom control that needs it's viewstate to be loaded on init. Can I antecipate the view state loading at any time?
View 1 Replies