Forms Data Controls :: Clicking Edit Changes GridView Back To Original Query?
May 28, 2010
I have a gridview that I have bound to a sqldatasource. However I have the gridview changing data shown per a drop down list and textbox so I can choose how I am searching.
My code includes changing the select command of the data source and rebinding the gridview.
My issue is that if I implement the edit button and click edit the grid view seems to resort back to the original select command that was entered when I created the datasource.
Is there any way to get the gridview to do what I want it to?
View 11 Replies
Similar Messages:
Jun 3, 2010
I created a grid and successfully done update, delete, filled functionality.
But whenever I m clicking on Gridview row, its hieght get increased and color of the row become red while clicking on edit button. But this problem is occuring in Mozilla,IE7 not in IE6. Project is running good in IE6. What could be the solution for this.
View 8 Replies
Oct 15, 2010
Is there any way to stop Gridview to turn back to first row when user click edit link button. Say there are 50 rows in gridview, user scrolled down to 45th row then click edit button. Gridview shifted to editmode but user need to roll down back again to reach the row 45th.
View 1 Replies
Mar 31, 2010
I have some custom Code to handle the Insert And Edit Mode on the OnRowCommand="CheckTheData" property of the GridViewThe Grid Starts in the "Readonly" mode, click on the edit button and it goed into edit mode for that row My routine ends with:The update is done and the display refreshes, but in the edit mode. If I click the clancel button back to read only mode.How can I get the gridview to redisplay in the read Only mode after the update?
View 1 Replies
Mar 23, 2011
[Code]....
View 8 Replies
Jul 15, 2010
When I try to edit a field of a GridView or DetailsView on the WebServer I have to highlight the area I want to edit instead of just clicking into and empty field and start typing What setting did I forget to set to allow easy editing without having to highlight the are first?
View 5 Replies
May 4, 2010
I have a gridview (Edit and Delete enabled) that shows a table. A Text Box and A Button. When I type something in the textbox and click the button, the button runs the datasource.filterexpression and filters out the rows. The question whenever I click on the edit button after the filter has been applied The grid auto resets back to the original table? How can I solve this?
View 1 Replies
Jul 15, 2010
I've databound some data to a datagrid and I'm wanting to be able to get the original data back.
I've databound the data as follows in one section of my code.
IEnumerable<MyClass> myClasses = GetMyClassesFromDatabase();
DataGridForMyClass.DataSource = myClasses;
DataGridForMyClass.DataBind();
When I've clicked a button, I want to be able to do stuff with the items in the datagrid.
How do I, given the DataGridForMyClass, retrieve the original list of MyClass?
View 1 Replies
Nov 5, 2010
Lots of people recommend to wrap the MVC JsonReturn result in a textarea to play nicely with jquery forms etc.
That part makes sense but how do I get the json object back in my client jquery code?
The client jquery plugin should look something like this:
// Doesn't work since data is "<textarea>{"error":true,"msg":"foo"}
View 1 Replies
May 17, 2010
By right clicking on my database i created a query in server explorer. But where are this query stored can't find them back. I should aspect that their is a folder query's like there is a folder tables but this isn't the case.
View 10 Replies
Nov 1, 2010
I have a gridview with edit button. I want to set focus on a textbox in a row when clicking "Edit" button. (it is a label before clicking edit, it become a textbox after clicking edit). However, i can't set it focus in Rowdatabound. By the way, I make a simple .aspx page and just put a textbox on the tabcontainer tab panel. I found that i totally cannot set focus on this text box.
Here is aspx page with a text box, the .aspx page code is below:
[code]....
View 10 Replies
Mar 31, 2010
I have a gridview bound to a sqldatasource with editing enabled. If I click Edit, then either Cancel or Update, the update or cancel occurs and the Edit button reappears. However, I cannot then click the browser's back button without having the Update and Cancel buttons reappear. A second click of the back button takes me to a state where the Edit button shows again, *then* another back button click will take me to the referring page (the one before the one with the gridview on it.) IOW, it looks like the postbacks are cached. How can I prevent this and have the back button go straight to the referring page?
View 4 Replies
Aug 3, 2010
My Gridview is refreshing its datasource when the edit button is clicked. How can I prevent this from happening? This isn't much of a problem when there aren't a lot of records, but when there are many it takes awhile. The data is already loaded so the edit button shouldn't need to reload the data. The edit button is a template edit button, and I'm using an SQL Datasource that connects to an Oracle database. The SQL datasource uses a control parameter that points to a dropdownlist.
View 1 Replies
Mar 30, 2010
I have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
View 4 Replies
Apr 5, 2010
Can someone tell me if there is a technique to make an entire Column within an gridview (for example digits) editable (instaed of a single row) and update this column after changing values by press an Update-button?
A commercial solution is also o.k. with me, but, of course, a method to do it ourselve would be nice.
View 2 Replies
Dec 4, 2010
- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
View 5 Replies
Mar 16, 2011
I have a page with 2 GridViews on it. The top GridView shows all the Bike Riders the bottom GridView shows all the Bike Lockers. I have set up both GridViews to be able to Edit the data. And the top GridView to Select.
When I click the Select buton on the top GridView I programically reset the DataSource for the bottom GridView to show the Locker for the Biker of the top GridView Selected.
So far everything works great. I select a Biker on the Top GridView and the Bottom GridView resets just showing one record for the bike locker.
The problem is that if I then click on the Edit button on the bottom GridView (The Bike Locker GridView) the GridView goes into the Edit Mode but it now shows all the Bike Locker records and the edit record is always the top record of the GrdView.
Here is my code Behind:
[Code]....
View 1 Replies
Aug 18, 2010
How do I change these hyperlinks to say something other then Edit and Cancel?
View 4 Replies
Feb 10, 2010
I have a page that displays a grid view based on a query string. When I click the edit button I need to send the grid view into edit mode based on the query string. I have this so far:
[Code]....
When I requested the page the first time, the grid view displayed properly, and when I clicked the edit link button, it did trigger the update mode. However, I can't get the cancel mode to operate properly; in other words, cancel never sends it back to normal mode, as a result, with each new page request, I'm always stuck on the last edited record.
View 1 Replies
Sep 7, 2010
I want to give my users the ability to select a row by clicking anywhere on the GridView.
So based on the selected Row i will change one particular column value based on my validation.
How can i add the click event on the GridView?
View 4 Replies
Oct 9, 2010
Within a WizardStep in the AccountManagement.aspx page, I have the following Gridview:
[Code]....
When a UserName HyperLinkField is clicked, I want to go to the another WizardStep.
With DataNavigateUrlFormatString="AccountManagement.aspx?user={0}, I think the page refreshes rather than posts back.
How do I get to another WizardStep? Do I have to cause a PostBack rather than a refresh?
View 1 Replies
Feb 23, 2011
So most of the time my stylesheets appear properly. The standard/original one always works flawlessly, however it seems sometimes the mobile one is disregarded when looked at from a mobile device
I have them designated as follows:
<link href="CustomStyleSheets/standard.css" rel="stylesheet" type="text/css" />
<link href="CustomStyleSheets/mobile.css" rel="stylesheet" type="text/css" media="only screen and (max-device-width: 799px)" />
I'm using a Droid X to view the page, in portrait mode, so the device width shouldn't be exceeding the max-width specified above, but sometimes, randomly, it still reverts back to the original css page.
View 4 Replies
Jan 19, 2011
i have a gridview which Pagesize set to 5. There will be some error while i click to page2, i knew it was caused by what but i got no good idea how to solve it.
Me.GridView.DataSource = DT.DefaultView
Me.GridView.DataBind()
For x As Integer = 0 To DT.Rows.Count - 1
If DT.Rows(x).Item("status") = "Verifying" Then
Me.GridView.Rows(x).BackColor = Drawing.Color.Tomato
ElseIf DT.Rows(x).Item("status") = "Processed" Then
Me.GridView.Rows(x).BackColor = Drawing.Color.CadetBlue
End If
Next
View 1 Replies
Jun 29, 2010
i have a problem with my asp project.i have a gridview that is created dynamically and all rows cells contain hyperlinks that are created dynamically also
all i wanna do is after clicking at any on this hyperlinks i can get the index of the cell where this hyperlink i clicked exist or even the text of the hyperlink i clicked but i don't know how i can do this
The eventhandler for the hyperlink is as follow:
[Code]....
i write in this code selectedrow.cells[0] but this is not what i want.What i need to replace 0 with the index of the cell i clicked
View 10 Replies
Apr 20, 2010
i'm working in visual studio 2005 c#
how do i change gridview datasource by clicking a link ;
how do i insert code to the onclick evvent to change the data source ?
View 2 Replies
