I have Master - Details relationship between GridView & DetailsView controls bound. So each time the GridView's index is changed the DetailsView image is updated.
However, after I fire Response.Redirect("~/theSamePage.aspx"), the DetailsView data does not get displayed.
All binding script is withing <asp> tags, provided declaratively on .aspx page
how i can get my DetailsView updated?
In this case I'm having, the ItemTemplate for various fields in my DetailsView (2 in my case) does not show up, but when you click the edit button, the EditItemTemplate shows up. I played with it, moving it around. No matter where I put it, one of the fields did not show up.
To get even stranger (and don't ask me how I came up with this), if I put a dummy boundfield BEFORE it, the ItemTemplate shows up. But this is totally absurd.
Here's the html:
[code]....
How can I get gridview and detailsview to show up when there are no records. I need this for my edit's
View 4 RepliesI have a gridview that allows you to select and a details view show up at the bottom. Is there a way to make the details view show in a new window instead,
View 6 Repliesafter a DetailsView (DV) 'Insert' (triggered by a DropDownList (DDL)) the DV shows the first record (in the DDL)!Are there VS2008 means to keep / show the just entered data - again ready with the command row "Edit/Delete/New" enabling me to e.g. "Edit" the just entered data?This DDL/DV scenario works just fine but to show my just entered record I have to leave this page and start calling this .aspx page again in order to see the name in the DDL and, hence, in the DV.I.e. I'm looking for a kind of automatic 'postback' bringing my just entered data back
View 9 RepliesI have a gridview and detailsview that are connected. When I delete records everything works fine except when I delete the last record in the gridview. I want the detailsview to revert to insert mode when I delete the last row in the gridview. Instead the detailsview shows up blank. I want to show the detailsview in insert mode after last row in grid has been deleted? How can do I this?
[Code]....
A few questions regarding detailsview and gridview:
1) when page load, how can I default the detailsview to show the first record from the gridview? SelectedIndex does not have any effect to my detailsview.
[Code]....
2) how can I select a record in the gridview if my table has 2 key fields using below syntax?
[Code]....
I have a problem with DetailsView linked with Database, DetailsView is Insert/Edit enabled, and adding/ediditng data works, however........ when I add a new record (DetailsView in Insert mode) and press INSET instead going to record I have just created in Read-Only Mode it shows me blank form, it looks that the "linking" field is null.
View 3 RepliesI am trying to arrange the information from a SQL record into a 3 column by 3 row table to fit the form presentation that I want. I have placed on the page 3X3 table and then tried to place a detailsview in the first cell for the first picture called P1dv.
I have place a detailsview in the last cell that would control the paging of information called Controldv. I need to fiqure out how to link P1dv paging to Controldv page action. I am using visual web dev. 2005. I am not updating or editing these are read only views.
example of what i need the form output to look like:
picture1 picture2 picture3
name1 name2 name3
Contact1 contact2 contact3
what i ave coded as of now:
[Code]....
I´m trying to link the gridview to detailsview and I used this page as my inspiration:
http://quickstarts.asp.net/QuickStartv20/aspnet/doc/ctrlref/data/detailsview.aspx
But I´m trying to do that programmatically, not with the sqldatasource. So I wrote the method that binds data to Detailsview and I call it in the page_load. The problem is that I have to click two times on the select button to view the detailsview. The first time I click on the select button nothing happens.
I have a gridview with a Select button. Clicking the Select button for a particular item, I need its full details displayed in DetailsView. how I can bind to DetailsView? Here is what I have so far.
.aspx
<asp:GridView ID="GridView1" runat="server" AllowSorting="True" AllowPaging="True" PageSize="10" OnPageIndexChanging="countryGrid_PageIndexChanging"
CellPadding="4" ForeColor="#333333" Width="400px" Font-Size="9pt" [code].....
I have a page A with an EDIT LINK. When click it sends a parameter to a second page B, which contains a DetailsView in Edit mode.Page B take care of editing the details.
A.aspx?AuthorId=89
My problem is: I am not able to visualize the Right AuthorId passed from page A.aspx in the DetailsView in B.
What I am missing? Please if you have send me a link with some tutorials. Thanks for your time!
Here code for DetailsView -----------
<asp:DetailsView ID="DetailsView1" runat="server" AutoGenerateRows="False"
DataKeyNames="AuthorId" DataSourceID="EntityDataSource1" Height="50px"
Width="125px" DefaultMode="Edit">
<Fields>
<asp:BoundField DataField="AuthorId" HeaderText="AuthorId" ReadOnly="True"
SortExpression="AuthorId" />
<asp:BoundField DataField="UserId" HeaderText="UserId"
SortExpression="UserId" />
<asp:BoundField DataField="FirstName" HeaderText="FirstName"
SortExpression="FirstName" />
<asp:BoundField DataField="LastName" HeaderText="LastName"
SortExpression="LastName" />
<asp:BoundField DataField="NoteInternal" HeaderText="NoteInternal"
SortExpression="NoteInternal" />
<asp:BoundField DataField="ContentAuthor" HeaderText="ContentAuthor"
SortExpression="ContentAuthor" />
</Fields>
</asp:DetailsView>
I currently have a label in an ItemTemplate that looks like this:
<asp:Label ID="bodyLabel" runat="server" Text='<%# Bind("body") %>' />
How do I only show the first paragraph of the article and then allow the visitor to click to view more?
I would like to find controls in the detailsview control placed in the EmptyData Template of the gridview. I am trying to create Insert new record for the gridview control.
1. If there are existing records in the table - works fine and sets my two values: I placed Detailsview and Insert Button in the footer of the gridview. I needed to set the values of two fields. When I click on the Insert button it saves new record and sets the field with the value (code attached - works fine). I also have a popup extender that opens detailsview - this works just fine.
2, If ther are not records in the table - saves record but cannot find and set controls on the detailsview Same thing setup in the EmptyData Template. The record is saved but I cannot Find and set the field value on the control.
1. Link button (on click) in the gridview footer (works fine)
protected void LinkButton1_Click1(object sender, EventArgs e)
{
string zupa1;
zupa1 = ddlSelectEmployee.SelectedValue;
try
{
DetailsView zupa = (DetailsView)gvTraining4.FooterRow.FindControl("DetailsView1"); TextBox zupa2 = (TextBox) zupa.FindControl("txtInsertEmployee");
zupa2.Text = zupa1;
}
catch
{
}
DetailsView dettraining = (DetailsView)gvTraining4.FooterRow.FindControl("DetailsView1");
TextBox training = (TextBox) dettraining.FindControl("txtTrainingType");
training.Text = "4";
}
2. EmptyDataTemplate.FindControl - can save record but cannot access txtInsertEmployee and txtTrainingType
DetailsView zupa = (DetailsView)gvTraining4.EmptyDataTemplate.FindControl("DetailsView1");TextBox
zupa2 = (TextBox)zupa.FindControl("txtInsertEmployee");TextBox
training = (TextBox)dettraining.FindControl("txtTrainingType");"4";
First of all, I'm relatively new to asp.net (3.5) and all of its controls. What I'm trying to do is to split up a detailsview. I have a submission form containing quite a lot of fields that are supposed to be filled out by the user. In my design I have a tabstrip with headlines about the different sections of the form. For example:
Tab1: Personal Info
Tab2: Info about your car
Tab3: Contact info
I have tested to add a new "user" via a DetailsView and it works. But what I want to do is to split up the contents within the <Field> tags In the DetailsView In different div classes (using css and javascript to hide/show the right tab contents). But when I try to do this Visual Studio says that characters like <p> and others aren't allowed within the Field tags, which makes sense. Is there any control to use for these kinds of situations?
i want to bind the existing value in database to dropdown list in dititemtemplate
[Code]....
I need to test less than value of a integer value contained in a DetailsView
if ( DetailsView1.Rows[0].Cells[1] < 30 )
{
TextBox1.Visible = true;
}
getting error saying Operator '<' can't be applied to operands of type.TableCell' and int What am I missing? How does this differ from a GridView container?
What I'm trynna do is to input value in the TextBox1, and pass the string value to the label when button "ChangeText" is clicked.Pretty straightforward.
[Code]....
[Code]....
and how to use both of those checkbox (for example: when i click update in my detailsview, if the checkbox is checked will return 1 and if unchecked will return 0 and insert that value to database)
I have a detailsview which is used to input data into an SQL database. Some of the fields contain drop down menus which are populated from the database.
I also have a form that allows the user to select mutiple values from a listbox (populated from an sql database) by moving the required items from one list box containing all the available items into a second one containing the selected items. There is also a text box which is used to filter on the available items. When this is passed through to a stored procedure to be put into the database, it is passed as a comma delimited string containing all the selected values.
This works fine on a separate form, however I would like to include it in one of the fields of the detailsview. This creates a BC30451: Name 'ListBox1' is not declared error. I have looked for hours on the internet to try and resolve this but cannot find what I need for how to declare the list for use within the detailsview.
Here is the code for both the working multiselect form and the code for when I have tried to integrate it into the detailsview:
[Code]....
Multi-Select (CodeBehind):
[Code]....
DetailsViewForm:
[Code]....
DetailsView (CodeBehind):
[Code]....
i have a problem with detailsview as below, when user click on btnEdit, it will call detailsview.changemode(edit) and then allow user to enter data into the textbox, after that user will click on btnsave and then to read the value from txtname and process the value. my question is how do i get the value from txtname? i dont want to use any datasource component and i have tried call the DetailsView1.FindControl("txtname") and it returned txtbox with empty text.
[Code]....
I have two detailsview, detailsview1 and detailsview2. Both are for pagination purpose.
Both are using same ObjectDataSource control (DataKeyName and DataSourceID is same in both ObjectDataSource control)
OnDataBound Event both called same Event RefreshDetailsView and In case of page index changing both used same method.
But when I do pagination using my detailsview2, this does not work only count got changed.
While detailsView1 works fine in case of pagination
[Code]....
What I'm trying to do is similar to the following within the gridview RowDataBound event, only with a detailsview:
DataBinder.Eval(e.Row.DataItem, "TotalPayment")
I created a DataBound event for the detailsview, and it doesnt recognize e.row. I've looked at some reference materials which tell me to use DataBinder.Eval(Container.DataItem, "TotalPayment") but then it doesnt recognize container.
Why there is an AlternatingItemTemplate available for templated fields of DetailsView when the control allows only one item visible at a time? I defined the template and see that all data pages are shown according to AlternatingItemTemplate.
View 6 RepliesHow do i use drop down list in the details view? While inserting user should be able to select the "Car Name" from the drop downlist and the "Car Id" should be get inerted into database. Also while editing the appropriate Car Name should be selected in the drop down list.
How the HTML code and the Binding should look for this details view ?