Why there is an AlternatingItemTemplate available for templated fields of DetailsView when the control allows only one item visible at a time? I defined the template and see that all data pages are shown according to AlternatingItemTemplate.
View 6 Replies
I am trying to enable server side code to check my session varible but my itemcommand is not being executed because my modalpopup is client click.Each template is loading the iframe which is horible performance killer. How do I get it to load the iframe on LinkButton click only once?
[Code]....
[Code]....
I am trying to arrange the information from a SQL record into a 3 column by 3 row table to fit the form presentation that I want. I have placed on the page 3X3 table and then tried to place a detailsview in the first cell for the first picture called P1dv.
I have place a detailsview in the last cell that would control the paging of information called Controldv. I need to fiqure out how to link P1dv paging to Controldv page action. I am using visual web dev. 2005. I am not updating or editing these are read only views.
example of what i need the form output to look like:
picture1 picture2 picture3
name1 name2 name3
Contact1 contact2 contact3
what i ave coded as of now:
[Code]....
I´m trying to link the gridview to detailsview and I used this page as my inspiration:
http://quickstarts.asp.net/QuickStartv20/aspnet/doc/ctrlref/data/detailsview.aspx
But I´m trying to do that programmatically, not with the sqldatasource. So I wrote the method that binds data to Detailsview and I call it in the page_load. The problem is that I have to click two times on the select button to view the detailsview. The first time I click on the select button nothing happens.
I have a gridview with a Select button. Clicking the Select button for a particular item, I need its full details displayed in DetailsView. how I can bind to DetailsView? Here is what I have so far.
.aspx
<asp:GridView ID="GridView1" runat="server" AllowSorting="True" AllowPaging="True" PageSize="10" OnPageIndexChanging="countryGrid_PageIndexChanging"
CellPadding="4" ForeColor="#333333" Width="400px" Font-Size="9pt" [code].....
why user AlternatingItemTemplate on listview and copy code from ItemTemplate to AlternatingItemTemplate?
i can't see logic? You can alternate with css too...
I would like to find controls in the detailsview control placed in the EmptyData Template of the gridview. I am trying to create Insert new record for the gridview control.
1. If there are existing records in the table - works fine and sets my two values: I placed Detailsview and Insert Button in the footer of the gridview. I needed to set the values of two fields. When I click on the Insert button it saves new record and sets the field with the value (code attached - works fine). I also have a popup extender that opens detailsview - this works just fine.
2, If ther are not records in the table - saves record but cannot find and set controls on the detailsview Same thing setup in the EmptyData Template. The record is saved but I cannot Find and set the field value on the control.
1. Link button (on click) in the gridview footer (works fine)
protected void LinkButton1_Click1(object sender, EventArgs e)
{
string zupa1;
zupa1 = ddlSelectEmployee.SelectedValue;
try
{
DetailsView zupa = (DetailsView)gvTraining4.FooterRow.FindControl("DetailsView1"); TextBox zupa2 = (TextBox) zupa.FindControl("txtInsertEmployee");
zupa2.Text = zupa1;
}
catch
{
}
DetailsView dettraining = (DetailsView)gvTraining4.FooterRow.FindControl("DetailsView1");
TextBox training = (TextBox) dettraining.FindControl("txtTrainingType");
training.Text = "4";
}
2. EmptyDataTemplate.FindControl - can save record but cannot access txtInsertEmployee and txtTrainingType
DetailsView zupa = (DetailsView)gvTraining4.EmptyDataTemplate.FindControl("DetailsView1");TextBox
zupa2 = (TextBox)zupa.FindControl("txtInsertEmployee");TextBox
training = (TextBox)dettraining.FindControl("txtTrainingType");"4";
First of all, I'm relatively new to asp.net (3.5) and all of its controls. What I'm trying to do is to split up a detailsview. I have a submission form containing quite a lot of fields that are supposed to be filled out by the user. In my design I have a tabstrip with headlines about the different sections of the form. For example:
Tab1: Personal Info
Tab2: Info about your car
Tab3: Contact info
I have tested to add a new "user" via a DetailsView and it works. But what I want to do is to split up the contents within the <Field> tags In the DetailsView In different div classes (using css and javascript to hide/show the right tab contents). But when I try to do this Visual Studio says that characters like <p> and others aren't allowed within the Field tags, which makes sense. Is there any control to use for these kinds of situations?
i want to bind the existing value in database to dropdown list in dititemtemplate
[Code]....
I need to test less than value of a integer value contained in a DetailsView
if ( DetailsView1.Rows[0].Cells[1] < 30 )
{
TextBox1.Visible = true;
}
getting error saying Operator '<' can't be applied to operands of type.TableCell' and int What am I missing? How does this differ from a GridView container?
What I'm trynna do is to input value in the TextBox1, and pass the string value to the label when button "ChangeText" is clicked.Pretty straightforward.
[Code]....
[Code]....
and how to use both of those checkbox (for example: when i click update in my detailsview, if the checkbox is checked will return 1 and if unchecked will return 0 and insert that value to database)
I have a detailsview which is used to input data into an SQL database. Some of the fields contain drop down menus which are populated from the database.
I also have a form that allows the user to select mutiple values from a listbox (populated from an sql database) by moving the required items from one list box containing all the available items into a second one containing the selected items. There is also a text box which is used to filter on the available items. When this is passed through to a stored procedure to be put into the database, it is passed as a comma delimited string containing all the selected values.
This works fine on a separate form, however I would like to include it in one of the fields of the detailsview. This creates a BC30451: Name 'ListBox1' is not declared error. I have looked for hours on the internet to try and resolve this but cannot find what I need for how to declare the list for use within the detailsview.
Here is the code for both the working multiselect form and the code for when I have tried to integrate it into the detailsview:
[Code]....
Multi-Select (CodeBehind):
[Code]....
DetailsViewForm:
[Code]....
DetailsView (CodeBehind):
[Code]....
i have a problem with detailsview as below, when user click on btnEdit, it will call detailsview.changemode(edit) and then allow user to enter data into the textbox, after that user will click on btnsave and then to read the value from txtname and process the value. my question is how do i get the value from txtname? i dont want to use any datasource component and i have tried call the DetailsView1.FindControl("txtname") and it returned txtbox with empty text.
[Code]....
I have two detailsview, detailsview1 and detailsview2. Both are for pagination purpose.
Both are using same ObjectDataSource control (DataKeyName and DataSourceID is same in both ObjectDataSource control)
OnDataBound Event both called same Event RefreshDetailsView and In case of page index changing both used same method.
But when I do pagination using my detailsview2, this does not work only count got changed.
While detailsView1 works fine in case of pagination
[Code]....
What I'm trying to do is similar to the following within the gridview RowDataBound event, only with a detailsview:
DataBinder.Eval(e.Row.DataItem, "TotalPayment")
I created a DataBound event for the detailsview, and it doesnt recognize e.row. I've looked at some reference materials which tell me to use DataBinder.Eval(Container.DataItem, "TotalPayment") but then it doesnt recognize container.
I have Master - Details relationship between GridView & DetailsView controls bound. So each time the GridView's index is changed the DetailsView image is updated.
However, after I fire Response.Redirect("~/theSamePage.aspx"), the DetailsView data does not get displayed.
All binding script is withing <asp> tags, provided declaratively on .aspx page
how i can get my DetailsView updated?
How do i use drop down list in the details view? While inserting user should be able to select the "Car Name" from the drop downlist and the "Car Id" should be get inerted into database. Also while editing the appropriate Car Name should be selected in the drop down list.
How the HTML code and the Binding should look for this details view ?
I have built a set of custom business objects that I have successfully bound to the GridView and DetailsView controls using the ObjectDataSource. I have been able to provide insert/update/delete functionality and all is working as expected. However, I am trying to wrap this functionality into a custom user control that allows the consumer to specify a table name and a list of column names and have it build this functionality on the fly without regard to the table structure (ie...available columns). I have been able to successfully get the GridView and DetailView to build the columns from code behind and I had all the CRUD working while using 2 panels to show/hide the GridView and DetailsView controls, but I wanted to add some AJAX ability to the control using Matt Berseth's modal popup example to make the interface slicker. The problem I am having is that the EditItemTemplate for the DetailsView control has to be specified in the code behind (because of the flexibile nature of the columns) and I can't figure out how to bind the data from code (rather than having the columns defined and bound in the markup). For all intensive purposes, I am trying to find the code behind counterpart to the following code snippet that binds the data to the textbox:
[Code]....
I use ObjectDataSource and DetailsView for Updating records . my Bll input parameter method is an Object instead of regular parameter . So i though i could make my own ObjectParameter in ItemUpdating event of DetailsView and i need some modifiation on the data that user input on boudfield in detailsView . I don't know how to access BoundFiled data from ItemUpdating Method of DetailsView.
View 1 RepliesI have a database containing a table with about 700,000 images so I recently enabled Filestream. However, I can't figure out how to render the images.
I have an Imagefield control within a Detailsview which is using an .aspx file to render the image through the DataImageUrlFormatString (which is typical). In my select statements I tried changing the binary field containing the image from objectdata to objectdata.PathName() per the Microsoft documentation but this does not work. I get the red X image box.
Duplicate Data in Gridview and Updating textbox in DetailsView
View 2 RepliesJust want to know if it is possible to Dynamically Populating a DetailsView with OleDb Data Adapter ? It has to be done on the Page_load because it has to display a users details that i must be able to edit!
View 4 RepliesI use a Detailsview, Entity Data Source to edit/update my table with only 3 columns.(it has primary keys).
Everything works fine inserts/edit in dev environment. but when i run this in release mode. i cannot update existing data in the database with the detailsview. whenever i update and save page gets refreshed, but nothing gets updated. but whenever i insert a new record, and then i try editing it. it works.?
Note: i handle DetailsviewItemUpdating,DetailsviewItemInserting events to do some custom checks.
I have a slight issue I awas trying to fix for 2-3 days, but nothing I try works.
The scenario:
DetailsView control in edit mode, I pass parameters to the SqlDataSourceProducts (edit.aspx?id=2) and the data source selects the appropriate data and fills in the DetailsView form.
Except two drop down lists. These two DDLs (DDL2 and DDL3) are dependent on the previous DDL (DDL1) in the DetailsView.
when the selected value of the DDL1 changes, DDL2 and 3 change their lists and get bound to the database.
The problem is: when I edit something from the database, DDL2 and 3 appear empty and when I update any other field and leave these, they get blanked in the database.
My goal is to set the selected value of DDL2 and 3 to the values in the database WHERE ID = QueryStringField="id".
I can go for not binding the data unless the field is changed, but does not sound professional and user friendly.
code:
The SqlDataSource used to select the parameters from the table and populate the DetailsView
[Code]....
The code of the fields that hold the DDLs in the DetailsView control
[Code]....
The codebehind:
[Code]....
