I have a computed column "Time" in an SQL2005 table that contains minutes, e.g 75 that is created from datediff.
In a GridView control, how can I display it in a HH:MM format ?
I know how to format it when using a datetime field, but this is an integer field.
I can change the "Time" column to another format if required.
I have a Transport Detaisl in DB , i want to dispay data on gridview with marquee scrolling up. Cabs are scheduled for drop every hour. So if drop is at 7pm i hav to dispaly on data of that hour from 6:30 to 7:15 later after 7:15 i have to display next hour data ie 8:00 pm drop data. I am able to get scrollin g data on gridview but how to schedlue it to scroll for such timings
View 1 RepliesWhat I have below is currently working on my site to display information within an article. What I am wondering is that within a lot of stories I have more than one 'SchoolID' included. All of these IDs are in our database within the 'ArticleSchool' table and linked to an 'ArticleID.' The statement below is only displaying the first 'SchoolID' listed within an article. Is there a way I would be able to display every 'SchoolID' within an article to grab information from? Will it not work in a label if there are multiple values? The 'ArticleSchool' table has rows for every article and a new instance if more than one 'SchoolID' is attached.
[Code]....
I have a doubt regarding displaying data in gridview. I have comma separated values in a particular field in my database. Will I be able to display the comma separated values from db table in a control in the Item template field of my gridview?
View 2 Repliesive have a call that pulls back an RSS feed and displays it in a label but theres stuff i dont want after the word "Fast" how do i go about parsing a label field to stop displaying anything after the word "fast".... if that makes sense
P.S! this isnt my first post had to create a new account. microsoft! when you click forgot password it brings up an error...and the few times it works the link it sends you is expired when you click on it..been like that for 2 weeks!
I have a textbox that the user enters a time into, so 04:10 PM, I would like it to round to 04:15 PM, likewise 04:06 PM would Round to 04:00 PM.
Is there any built in controls that handle this, are there any code samples out there?
I have a gridview and the gridview contains some boundfield, templatefield, checkbox and an update command button.
When I click the update button, I want to update only 2 columns. So I made rest of columns readonly=true.
BUT, there is a template field and I am changing the value of the template field from code behind. like below
[Code]....
I do not want to update the above column. so when I click update button, the rows having value more than 0 is working fine.
BUT The rows displaying "Expired" (value less than 0) showing error. It says "Object reference not set to an instance of an object."
I want to redirect the user after 2 mins if there is inactivity for 2 mins. I am not using ASP.NEt membership. And I dont want to use Sessiontimeout for this. Session timeout will logout the user even if he is working on the system. My objective is like screensaver process.
If there is no action for the specified time, the screensaver runs. Similarly, I want to redirect the user to login page.
note that i have already handled it with the following javascript:
[Code]....
Here what my problem is,
the user is working on the site...ok.. he want to see someother site.he browse someother site and works on....or even he can do some other work in his system...but he is active in his system... What this script does is, it automatically logout the user and redirect him to login page. But it should not do while he is active...IT SHOULD REDIRECT IF HE IS NOT ACTIVE REALLY (Similar to Screensaver process)
Is it possible ?
I am using a GridView Control to display multiple fileds with 0's and 1's.
I am using template fields where CheckBoxes are used.
Where exactly and how do I apply the Logic to get a checked CheckBox when field Value=1 and unchecked CheckBox when field Value=2 .Also some times to be able to write a YES where fieldValue=1 or NO where filedValue=0
Do I apply this logic using asp or C#? How?
I have 2 fields in my gridview one called ScriptType the other BagNo, when a user click the edit button, I would like the BagNo filed to be disabled if the ScriptType field is = "TTA" and enabled otherwise. How can I do this?..something along these lines see below..I am using VB..
[code]...
I have a DetailsView on the page and I have made one of the fields a TemplateField. In the EditItemTemplate and InsertItemTemplate I have a DropdownList that is databound to a table in my Sql Server database. I wanted to add an initial value to the DropdownList
namely "- select -" .
I set the AppendDataBoundItems property to true and added the initial value as a ListItem.Markup of the DropdownList
<asp:DropDownList ID="DropDownList_HP" runat="server"
AppendDataBoundItems="True" DataSourceID="SqlDataSource_HP" [code]...
This works fine for new input. The problem is however that the database already has records that were entered through a Windows Application and many of these records has a null value in this field and exceptions are thrown when I tried to open these records
and the system tried to set the SelectedValue of the DropdownList.After some more searching I found this help
http://msdn.microsoft.com/en-us/library/ms366709.aspx
So I changed the ListItem in the DropDownList markup to the following:
<asp:DropDownList ID="DropDownList_RefHospDV4" runat="server"
AppendDataBoundItems="True" DataSourceID="SqlDataSource_RefHosp" [code]...
This now solved the problem of opening a record where the value is null in the database, BUT now the RequiredFieldValidator is not validating anymore to make sure that a databound item is selected for this field and not the initial value "- select -". So basically now it is not checking anymore to see if valid input has been entered for the DropDownList and it accepts "- select -" thus it acts as if the field is not a required field anymore.
In short what is required is that I want to make sure that the user enters a valid selection in the DropDownList, but it must also cater for old records that do not have this field entered yet so that those old records can be opened in the DetailsView .Opening Old records (with null in that field):When these old records are opened in the DetailsView the DropDownlist should show "- select -" when the value in the database is null.
Saving records (old or new records):When saving the record in Insert mode or Update mode the RequiredFieldValidator should show that a valid input is not selected if the DropDownList is still on "- select -".
I have a grid view, and I add new column as a hyper link field, I want the navigationURL for this field to be Pageexample.aspx?ID=other field value like this
[code]...
is that possible ?
I have contact mails large than 700.000 Mails and i want to insert them in sqlserver using c# in a few minutes not hours i know that pre impossible but , i know there`s way to do it
View 4 RepliesI have the code below that works fine, but I need to have more than one field using the same command.
[Code]....
I have a table named RECIPE which is linked to an other table name RECIPE_STATUS
In RECIPE table I have a field named Status_Id which contains the name of the Status which is fetch from the RECIPE_STATUS table based on this ID.
The RECIPE table sample information are as follow :
ID Name Status_Id
====================
1 Test1 0
2 Test2 1
3 Test3 2
The RECIPE_STATUS entries are as follow:
ID Name
========
0 Locked
1 Running
2 Free
From an ASP.net page I would like that my user is capable of changing the RECIPE_STATUS from a given recipe. For that I have a DataGrid which is bind to the RECIPE table.
But then what I would like is that the STATUS shown to my user to be the name Locked,Running or free depedning on the Id
How can I bound in my Datagrid the Recipe.Status to be bind to RECIPE_STATUS.Id ?
IN addition to that, If my user change the status for a given recipe, it should be properly save.
I want to hyperlink from a field in one gridview to a field in another gridview based on id. I've tried many ways but haven't seen success.
View 20 RepliesI'm working on a pretty basic little site that has content that is populated from a sql database. It's important to know that the data in sql includes some html (bolds, italics, ordered lists,etc). The problem I'm running into, involves the search results. On the search results page, I display the results from a sql query in a gridview. The sql query only returns the first 200 characters of the "Description" field, and then there is a link to click if the user wants to read the full description. The problem I'm running into is when the gridview tries to format the data that has an opening html tag, but no closing html tag (becasue the closing tag is over the 200 character limit.
[Code]....
I am trying to debug one of the project in which i need to show the data for one of the particular cell in two lines.
This Repeator control Exists in a user control and aspx is calling this User control for displaying the data.
Here is how my code looks:
[Code]....
i have 2 dropdownlist and gridview. Im trying to make a link after displaying the relational data in the gridview like below But how can i get the value and combine with the link
[Code]....
this is the all of my code
[Code]....
I have a datagrid which pulls data from a single database table to display it. However, this database table also contains information on the thumbnail URL for each record, and I would like to display the thumbnails for each record in the 1st column of the datagrid.
At present I have added the following to my datagrid:
[Code]....
So I presume the main challenge now is to set the Thumbnail.ImageUrl property to the correct file path in the VB.NET code. But how do I do this for each record? I am using a function to retrieve data for the gridview, which is based on the following:
[Code]....
I have created a web service and successfully displayed the data in a TextBox within another Project.
However, I have modified my web service so the data returned will return multiple enteries for the data rather than a singular value.
I would like to display all output fields from my web service into a GridView.
Is it possible to do this without modifying my GridView to display a ListView output etc...
Basically, I just want to place each field into a Gridview.
is there a possibility to do the following:
I have a GridView which has a button in each row. On click event I want to open a new window displaying the xml data of the row.
I tried to this with the following code in the RowCommand - event:
var doc = new XmlDocument();
doc.LoadXml(content);
Response.ContentType = "text/xml";
Response.ContentEncoding = System.Text.Encoding.UTF8;
doc.Save(context.Response.Output);
This always generates a script error:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed.
I have a Table (in SQL Server) that is being updated roughly every minute or so with new records being inserted from various sources. The number of records inserted in this duration varies from a few records up to dozens of new records. I am using an update panel to rebind my data every minute to keep the GridView current. Now that I have the data refreshing I am looking for a better solution than reloading the data every minute. how to best keep my GridView up to date? Here is what I would like to accomplish:
1. Load the GridView and refresh the contents every minute. (60 second intervals)
2. When the GridView is refreshed every minute I would like to append only the new records to the existing grid, rather than bringing back the entire result set with each round trip to the database.
3. I would like a visual cue to identify the rows that have been inserted into the GridView. If new rows were to flash/flicker with a background color (yellow) that would be ideal.
Am I even using the correct control for displaying real time data, or are their other options? I essentially am looking to find the preferred method of displaying data that is being updated in real time in a web application. I'm hoping there is a solution involving AJAX but I haven't been able to find much on The Google. I am open to changing anything and everything about my approach -- this is largely a learning exercise. For testing purposes I am currently using LinqDataSource in conjunction with a GridView in an UpdatePanel being refreshed by a Timer control every 60 seconds. Informational: I have also started playing with the [URL] in place of the Timer control. However, for the purposes of this example I would be content to achieve the desired behavior using native controls as I have described them above.
I am doing a search function where when user enters specific value (either by keying product name or product code) into textbox, data will be displayed using gridview.
However i have problems displaying it in gridview.
Below is my code:
[code]...
here I can find some info on how to display data from my MSSQL database in something like old style tables (table,<tr>,<td>) becouse I used to done it like this in classic asp but i had a formula for calculating where to put tr or td and it becomed very confused, not to mention displaying gruped records like 10 on each page...I tried gridview in VisualStudio but I can not find any info how to use sql in it so I think it can not help me becouse it is to much predefined and I do not know where I can change code for it like what data source to use, sql and other important thing
View 3 Replies