Forms Data Controls :: Dropdownlist - - Loading Based On Another Control And Databinding It?
Dec 23, 2010
Bringing back to life an old post that I dont believe ever got solved: http://forums.asp.net/t/1562245.aspxThis may be an old thread .... but no answer was ever given ... and I too have a radio button list and DDL and am stuck in the EXACT same place. If I check one of the two data bound radio buttons, the DDL should repopulate with a different set of results. This works just fine EXCEPT .... the DDL cannot be databound. If I set SELECTEDVALUE of the control to a bind I get this error:Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.I have followed the advice on this page from various users, all to no avail....surely this can be done, and I assume quite simply. Anyone know the answer?
[Code]....
View 3 Replies
Similar Messages:
May 17, 2010
I have a Data Bound DropDownList and a Panel in a step of the CreateUserWizard. I would like to make the panel visible based on the selected value of the DropDownList.
Here is my code that is not working. Any help identifying what I missed is appreciated. (Yes Post Back is enabled on the DropDownList.
[Code]....
View 3 Replies
Mar 29, 2010
I have a gridview in which I have two drop downs. One is populated with values that are static, so I have a regular sub that does that in the code behind. I tried to add code for databinding the other ddl to a datatable. I cannot get this to work. It just comes up empty. My asp code is fine, and the datatable definately has data in it - just nothing gets populated.
One other thing - the code for the static ddl has worked fine, but when I add this other block (either to the same sub as that, or dow the rowdatabound event) the static one doesn't work either.
[Code]....
View 2 Replies
Mar 24, 2010
I am trying to create a Gridview in which I can update the Project Officer name in the Gridview from a DropDownList.
The Project Officer DDL comes from a seperate query (SqlProjectOfficerName) as the other information (SqlDataSource1)... as you can see below.
When I select EDIT, the DDL appears and I can select from the list of Project Officers, but when I select UPDATE, the name of the Project Officer doesnot change.
review the code below and assist as appropriate to write the Project Officer's name back to the table.
[Code]....
View 13 Replies
Aug 27, 2010
I have many controls on my form, but in particular, I have 2 dropdownlists. 1 dropdown list has 2 values, and each value controls what the second dropdownlist displays. This is an edititemtemplate and both dropdowns have the selecteditem set via '<%# Bind("fieldname") #>' on page load.
THe problem is, if I change the value of the first dropdown, it errors out because the second dropdwon has a bound value that is no longer acceptable.
Can I cancel the bind of the second control, if the the first one is changed? I would like to cancel the bind, and update the values by using a different datasource depending on the value of the first dropdown or hardcode the new values.
If Dropdown1 has a value of "A" for example Dropdown 2 Shows Values "1", "2", "3"
If Dropdown 1 has a value of "B" , Dropdown2 Shows Values "4", "5", "6".
It binds fine initially, but if I change Dropdown1 from A to B, I want Dropdown2 to show the new values, maybe with a default of "Select an Item" and not error out b/c it's attempts to bind a value of 1, 2, or 3.
View 8 Replies
Mar 31, 2011
I have a formview that has several dropdownlists in the EditItemTemplate. Some of the dropdownlists are added using placeholders. I can add and populate their listitems without any problem. But when I update the record, none of the controls can be found--even though when I look at the page source they are there. I first strated out using asp:ControlParameter in my sqldatasource updateparameters, but even referencing the control as myform$mycontrol did nothing. So then I moved to code behind on the sqldatasource.updating event (code is attached). The only controls I cannot seem to bind to the update are those added via the placeholder.
[Code]....
The item at the dim statement is not an item added using a placeholder and does not get a null reference exception (I used that to prove during debbugging that I wasn't losing my mind)--however, all the items being used to get the parameter values are getting null reference exceptions and are added via placeholders. Here is the code I'm using to set up the dropdownlists:
[Code]....
how to get the value of these controls so they can be used in my update?
View 1 Replies
Dec 18, 2013
I am using a dropdownlist in a gridview which contains 3 valuesappleorangebanana
apple will be displayed as default valueif i select orange and banana the dropdownlist list should be disable or hidden but the selected value must be displayed
protected void btnsubmit_Click(object sender, EventArgs e)
{
foreach (GridViewRow gr in GridView1.Rows)
{
[Code].....
View 1 Replies
Jan 27, 2010
I've created a templated user control by following the example on the microsoft support pages. I won't post it all but the important part of the CS file looks as follows:
[Code]....
I'm not sure if the whole _CurrentDataItem business is required, I don't think so.The problem I've got, is that I've tried nesting it inside a FormView control so I can use it to display a record from a database. My ASPX looks like this:
[Code]....
Now, the bound properties (TitleText and TitleSubText) bind correctly, but the nested / template content is blank when the page loads. I'm not sure if this is something to do with the order in which everything is loaded or because I'm missing some code in the SimpleTemplate to get it to bind (etc.).
View 2 Replies
Jun 4, 2010
i have an Gridview with BoundFiled, for the bound field headertext alo coming from the table, but i dont know how to bind the headertext and data. i have used below code
<asp:BoundField runat="server" DataField="column1_data" HeaderText = DataBinder.Eval '<%# Bind("column1_text") %>'/>
but getting error as "The BoundField control with a two-way databinding to field column1_text must have an ID."
View 5 Replies
Aug 4, 2010
I have a asp:repeater control which I am using to display a photo and the Name. So for this I have to execute SQL query and unfortunately I dont have the control of the database - table design. So the photo comes from one table and the Name comes from another table. I wrote 2 sql queries to get both these information created 2 sqldatareader. So now I have to bind the repeater control to both of these reader. But I know it does not work. Is there any other way I can do this? I even tried to nest a repeater control inside another. But that does not work anyway.
View 2 Replies
May 3, 2010
I have a strange problem. I have made a PagedRepeater control, which inherits from the Repeater, from a tutorial I saw here: http://www.4guysfromrolla.com/articles/020905-1.aspx. It's in VB and I'm in C#, and it didn't quite have all the features I was lookingfor, so, I've modified it quite a bit. I added support for a SqlDataSource control, as well. The only problem is, that it always returns the first item from the SqlDataSource, even when the CurrentPageIndex on the PagedDataSource is set to a different value.
View 1 Replies
Sep 2, 2012
i have 2 DDL in my page that when users select item from ddldistric1 item in ddlcity1 will change these are my code
protected void DDLcity1_SelectedIndexChanged(object sender, EventArgs e)
{
BindDistrictC();
}
private void BindDistrictC()
[code]...
View 1 Replies
Nov 8, 2010
I'm trying to implement an ASP.NET DataBoundControl that supports two-way databinding. Unfortunatelly I can't find any documentation on how to do this on the web and even Dino Esposito in his ASP.NET 2.0 Advanced Topics only handles one-way databinding (also the contact form on his blog isn't working). Can anyone provide me with documentation or samples on how to do this?
View 2 Replies
Mar 2, 2010
I've got a FormView control for which I'm Viewing, Inserting and Updating to a MS SQL Database.
Instead of adding a SqlDataSource control to the page, I've created it in the code behind and declaring the properties/attributes for it during Page_Load.
At the moment, everything is bound and working fine, but I'm having an issue Databinding to the child controls in my FormView with parameters set in the code behind.
This is where I'm at.
[Code]....
[Code]....
So, I need to be able to bind the DS.InsertParameters.Add("PageTitle", ---) with the txPageTitle control in the Insert Template, same with the PageURL to txPageURL. Is there any easy way to do this from the code behind? I can't seem to find a way to add a parameter without needing to assign it a value.
View 7 Replies
Jul 14, 2010
I have a composite control inside a repeater. I am trying to set the controls public properties inline like so (this is a simplified example):
<uc1:Control runat="server" ID="id" Value='<%# Eval("value") %>'>
When I place the repeater inside a user control INSIDE ANOTHER user control and onto the page this works - the property is correctly set, if I inspect it inside the EnsureChildControls() method of the custom control the composite control's Value propertyis set to Eval("value") as intended.
View 2 Replies
Oct 11, 2010
I have a webForm which host a gridview and a formview. The formview is used for showing/editing a record which the user Select from the gridview.
In the formview Edit template I used DropDownList controls with
SelectedValue='<% bind("datafield")%>'
for enabling the user easier interface. A few of the DropDownList controls need to have a list of 100 items and I want to load the items from code behind and not from the aspx.
I tried to update the DDL's from FormView.Load, FormView.ModeChanging, FormView.PreRender but
nothing I am getting an error like this:
[code]....
How do I load the DropDownList controls with items BEFORE the form databinding occurs.
View 2 Replies
Aug 9, 2010
I have a gridview that I'd like to have changed based on a value selected in a dropdownlist. I'm able to get the aspx page to display the dropdown list (comming from SQL), and when I select a value, the page reloads, but no data show in the griview.
[Code]....
Here is the aspx page:
[Code]....
View 8 Replies
Dec 30, 2010
I have a gridview.In Header of gridview i added dropdownlist.
[Code]....
Here the problem is, i am getting selected value in temp variable(if i change to 20,50,100) in dropdown selection event but it is not binding the pagesize for the gridview and also dropdownlist showing the value "10" only after the pageload.
View 6 Replies
Jul 16, 2010
I have an emergency request that I need to sort it out very quickly as I did not notice it early :(.
I have a dropdownlist, the contnet in the gridview (sqldatasource connection) changes based on the value the user slects, say I have play1, play2 from the dropdownlist, I would like to show column1, column2 and column3 with user selects play1; show column4, column5, and clomn6 when use selects play2; the datatable actually includes all 6 columns.
I understand that I need to use something like RowCreated event, and I need to set up condition based on the dropdownlist value, but I dont really know how to.
View 3 Replies
Aug 16, 2010
I have a datagrid view, in that I have a templete column ,inside that I have Image control and label control.
Based on the Data from one column in database, i have to show Label and Image control,in template column.
How can i do that?
I am using ASP.net 2005 and dev language is C#.
View 4 Replies
May 28, 2010
I'm new to web dev and c# so please bare with me. I am trying to create a dynamic gridview in a web form for users to to answer questions with (code below).
The dificulty im having is that i am nesting a dropdwonlist in the gridview and want to be able to dynamically set the list values based on parameters (of the row they are on). These values are in the main dataset for the gridview as each row represents a questionid and question text and then a ddl for the criteria...
I just don't know how to set the values for the dropdown all the code so far is below... just need to be able to populate the dropdowns with the relevant values.
I have created a stored proc to return the different criteria based on the questionid and questionGroupid which is the dataset that populates the other fields in the gridview: dbo.usp_QuestionCriteria @QuestionGroupId, @QuestionId
I have added this as a tableadapter called criteriaTableAdapter in a xsd file as well using the wizard... not sure if this is the right option though or just use the same method as i have for the other stored procedure as in the code below:
[CODE
]using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["Sql"].ConnectionString);
con.Open();
SqlCommand com = new SqlCommand("usp_QuestionGroupDS", con);
com.CommandType = CommandType.StoredProcedure;
SqlDataAdapter ada = new SqlDataAdapter(com);
DataSet ds = new DataSet();
ada.Fill(ds);
for (int i = 0; i < ds.Tables.Count; i++)
{
if (ds.Tables[i].Rows.Count > 0)
{
GridView gvDynamicQuestion = new GridView();
gvDynamicQuestion.Width = Unit.Pixel(700);
gvDynamicQuestion.BorderWidth = Unit.Pixel(0);
gvDynamicQuestion.Caption = "<div id="nifty" class="QuestionGroup"> <b class="rtop"><b class="r1"></b><b class="r2"></b><b class="r3"></b><b class="r4"></b></b>" + ds.Tables[i].Rows[0]["Category"].ToString() + " Questions<b class="rbottom"><b
class="r4"></b><b class="r3"></b><b class="r2"></b><b class="r1"></b></b></div>";
gvDynamicQuestion.AutoGenerateColumns = false;
gvDynamicQuestion.ShowFooter = true;
TemplateField tf = null;
tf = new TemplateField();
tf.HeaderTemplate = new DynamicGridViewTextTemplate("QuestionId", DataControlRowType.Header);
tf.ItemTemplate = new DynamicGridViewTextTemplate("QuestionId", DataControlRowType.DataRow);
tf.FooterTemplate = new DynamicGridViewTextTemplate(DataControlRowType.Footer, ds.Tables[i].Rows.Count);
gvDynamicQuestion.Columns.Add(tf);
tf = new TemplateField();
tf.HeaderTemplate = new DynamicGridViewTextTemplate("Question", DataControlRowType.Header);
tf.ItemTemplate = new DynamicGridViewTextTemplate("Question", DataControlRowType.DataRow);
gvDynamicQuestion.Columns.Add(tf);
tf = new TemplateField();
tf.HeaderText = "Criteria";
tf.HeaderTemplate = new DynamicGridViewTextTemplate("Criteria", DataControlRowType.Header);
tf.ItemTemplate = new DynamicGridViewDDLTemplate();
gvDynamicQuestion.Columns.Add(tf);
////tf = new TemplateField();
////tf.HeaderText = "Criteria";
////tf.ItemTemplate = new DynamicGridViewDDLTemplate();
////gvDynamicQuestion.Columns.Add(tf);
gvDynamicQuestion.DataSource = ds.Tables[i];
gvDynamicQuestion.DataBind();
phDynamicGridHolder.Controls.Add(gvDynamicQuestion);
}
}
}
protected void DynamicGrid_RowDataBound(object sender, GridViewRowEventArgs e)
{
if (e.Row.RowType == DataControlRowType.Footer)
{
//
}
}
}
public class DynamicGridViewTextTemplate : ITemplate
{
string _ColName;
DataControlRowType _rowType;
int _Count;
public DynamicGridViewTextTemplate(string ColName, DataControlRowType RowType)
{
_ColName = ColName;
_rowType = RowType;
}
public DynamicGridViewTextTemplate(DataControlRowType RowType, int QuestionCount)
{
_rowType = RowType;
_Count = QuestionCount;
}
public void InstantiateIn(System.Web.UI.Control container)
{
switch (_rowType)
{
case DataControlRowType.Header:
Literal lc = new Literal();
lc.Text = "<b>" + _ColName + "</b>";
container.Controls.Add(lc);
break;
case DataControlRowType.DataRow:
Label lbl = new Label();
lbl.DataBinding += new EventHandler(this.lbl_DataBind);
container.Controls.Add(lbl);
break;
case DataControlRowType.Footer:
Literal flc = new Literal();
flc.Text = "<b>Total No of Questions:" + _Count + "</b>";
container.Controls.Add(flc);
break;
default:
break;
}
}
private void lbl_DataBind(Object sender, EventArgs e)
{
Label lbl = (Label)sender;
GridViewRow row = (GridViewRow)lbl.NamingContainer;
lbl.Text =DataBinder.Eval(row.DataItem, _ColName).ToString();
}
}
public class DynamicGridViewDDLTemplate : ITemplate
{
// Implementation of ITemplate
public void InstantiateIn(System.Web.UI.Control container)
{
// Create a DDL
DropDownList ddl = new DropDownList();
//Attach method to delegate
ddl.DataBinding += new System.EventHandler(this.ddl_DataBind);
container.Controls.Add(ddl);
}
//Method that responds to the DataBinding event
private void ddl_DataBind(object sender, System.EventArgs e)
{
//DropDownList ddl = (DropDownList)sender;
//DataGridItem container = (DataGridItem)ddl.NamingContainer;
//ddl.Data.Checked = [Data binding expression];
}
}
[/CODE]
View 7 Replies
Jun 21, 2010
I load a file using the FileUpload Control but it say I don't have a file? Please my code what am I doing wrong. Am I forgetting something.
[Code]....
View 9 Replies
Dec 16, 2010
I can't figure out how to get the legend to populate all the "strReason" and get the correct percents to show for each column. This is where I'm at right now.
[Code]....
View 1 Replies
Jul 2, 2010
GridViewDetails uses templatefields. In edittemplate I put a button called "ButtonUpdateAdjustAmount" with OnClick="Update_AdjustAmount" in the EditItemTemplate for the "Amt to be Adj" column. There is also a textbox. My user's should be able to edit the textbox, but I also want the ability to click the button and the textbox populated with the correct calculated value. The formula varies based on the "code" column which is a dropdownlist called "DropListCode".
I am fairly new to asp.net, vb, etc...so forgive my code writing. Eventually I need to also put the same functionality on the insertrow for my gridview. But first wanted to get the edit one working. I am using templatefields for all columns and the FooterTemplate to perform the Insert New Detail Line.
I can get the functionality to work for the first data row and only if I take out the If code.SelectedValue = ... line and leave 1 static formula. However that isn't going to work. If DropListCode.SelectedValue is DNR then AdjAmt should be ((q_ordered - q_received) * cost). If DropListCode. SelectedValue is OV then AdjAmt should be (RKNumber * cost). If DropListCode.SelectedValue is NB the AdjAmt should be ((q_received - q_ordered) * cost). If DropListCode.SelectedValue is DAM then AdjAmt should be (RKNumber * cost)
Code behind for the OnClick:
[Code]....
.aspx page - GridViewDetails programming:
[Code]....
View 6 Replies
Feb 8, 2010
I am attempting to show/hide a control (txtInpatientType) when a user views individual records on a FormView (frmData) depending on the value stored in another control (txtPatientType). For example, if txtPatientType.Text = "Inpatient" then txtInpatientType.Visible needs to be True. Very simple code follows.
[Code]....
txtPatietType and txtInpatientType are both ReadOnly. txtInpatientType.Visible = false by default.
View 17 Replies
