I am doing custom paging.I am adding my own LinkButton in the PagerTemplate. When I click the LinkButton it has to fire the GridView1_PageIndexChanging. How to do?
<PagerTemplate>
<div>
<table>
[code]...
i need to create a hyperlink dynamically. In our project till now we are calling the hyperlink in every page but now we need that controls must be displayed on the roles b'coz we are all the pages in one role and only few controls in some other roles
View 2 RepliesI was getting an error when there were more than 10 records. I was not handling the pageindexchanging event. I added some code which I found in the forum. Now I'm not getting the error when I click on the page index, but there are no records there. The First page says 17 records for my search of the database based on a keyword. There are 10 records displayed on page one and 0 records on page two. Why is this the case?
[Code]....
I have a gridview which i would like to design my own paging. i already have the first, next, previous, last linkbuttons and they work perfectly.But i need to show the total amount of records that are in the gridview (ie. Not total amount of records on each page of the gridview but all records on all the pages). I have set my gridview to display 5 records at a time.I need something like Pages 1 of 10 , Total number of records returned is 50 , Records 5 of 50. Can this be done?Also how do i make the index of the first page of the gridview = 1 instead of 0
View 4 Replies.I have a search page where I would search for an item and it would dispaly the results in a gridview...
I have allowed paging and set page size to 10..now I can see the 10 results in the first page and also see the page numbers at the bottom of gridview. But now when i click on the page 2, the method gridview_pageindexchanging is triggered but the result set is not dispalyed. My code is as below..
[code]....
i understand that the data is not binding in the GridView1_PageIndexChanging method..I do not know how can I make data bind..
Might be easier just to show the code, then explain what's happening:
[Code]....
When I click either the pager buttons, the ProgressPanel displays, but the grid is not updated. However when I click the pager button again, the ProgressPanel is not displayed, but the grid data is updated. Below is my page code behind:
[Code]....
i have a problem with my asp project.i have a gridview that is created dynamically and all rows cells contain hyperlinks that are created dynamically also
all i wanna do is after clicking at any on this hyperlinks i can get the index of the cell where this hyperlink i clicked exist or even the text of the hyperlink i clicked but i don't know how i can do this
The eventhandler for the hyperlink is as follow:
[Code]....
i write in this code selectedrow.cells[0] but this is not what i want.What i need to replace 0 with the index of the cell i clicked
I am problem with gridview pager template,i have a dropdownlist in my pagercontrol butdl.selectedindexchange is not getting fired up if i am trying to bind gridview at code behind.But if iam using sqldatasource instead its working fine.
[Code]....
its possible to use a DropDownList within the PagerTemplate to navigate to a specific record? I have been able to place the DropDownList outside of the FormView and PagerTemplate and make it work, however, I can't get it to work inside the PagerTemplate.
View 2 Repliesi get the error that the server tag is not well formed when trying to create a dynamic hyperlink in my formview.?
<asp:HyperLink ID="HyperLink1" runat="server" NavigateUrl="~/sendes.aspx?id='<%# Eval("id") %>'">HyperLink</asp:HyperLink>
<br />
I have a page with a data repeater. Each row has a dropdownlist for the user to select a value and the values in every dropdown are the same. I also have an SqlDataSource which each dropdownlist gets its values from as its created. Everything is working as it should but for each dropdown that is rendered a seperate call is made to the database.
suggest a better way for me to do this that means only one call to the database for all dropdowns rendered?
How we get dynamic text from database in the hyperlink???
View 1 RepliesI have multiple HyperLink controls and I want to enable or disable different panels base on which HyperLink I clicked on. This should be done using javascript. The question is: Is that possible to even use javascript for this? I know other button controls, there is onClick property but not in Hyperlink.
View 5 RepliesI have an asp:hyperlink that links to an iframe. I have set the navigateUrl to the iframe page would also like to pass a variable through to the iframe depending on what button is clicked.
View 1 RepliesI have a grid with edit link.
when user clicks onedit link , i want to show modal popup extender which displays text boxes for editing those data.
when user finishes editing the grid should again updated.
I have a dynamic Table which contain 8 rows and 8 Colums
Table t = new Table();
TableRow rr = new TableRow();
TableCell cc = new TableCell();
and in the each Cell CC I add a dynamic Button(Or Linkbtn)
LinkButton LB1 = new LinkButton();
LB1.Text = "AM";
LB1.ID ="Link1";
cc.Controls.Add(LB1);
rr.Cells.Add(cc);
LB1.Click += new EventHandler(LB1_Click);
t.Rows.Add(rr);
i have a table with 8 rows , 8 colums and each cell contain a LinkButton (which diffrent in IDs) I want to add Lable in the same cell of this LinkBtn(LB1) which it clicked but I cann't What shoud I write here?
void LB1_Click(object sender, EventArgs e)
{
// throw new NotImplementedException();
}
I have a loop which creates for each item ID a Dynamic created checkboxlist control
how do I create a dynamic validation control on a dynamic checkboxlist?
i'm using VB ASP.NET. i'm trying to display some values in Gridview. but i don't know how many columns i need to display. at run time only i will come to know how many columns i need to display. it depends up on the values from Database. so i'm creating columns dynamically and adding to gridview. till that it works fine. but i want some columns value to be hyperlink. so i need to create some columns hyperlink dynamically.
for example : if i need to make any chnage for 12/1/2010 john, i can click hyperlink "Work" and update the information. and if i need to add some description for 12/2/2010 John, i can click hyperlink "Add New" and add description for that date.
[Code].....
How can i create dynamic hyperlinks for the date columns. if you have any idea, how to do this,
I know normally you call ConfirmButton from a control that does postbacks, but afew of my users don't have javascript enabled which is a showstopper.
So I'm trying to use a standard asp:hyperlink with a URL to the next page, and if the user has javascript it will call the ConfirmButton on the onclick event (and if returns true will follow the URL in the hyperlink).
If they dont have javascript, it will just follow the hyperlink without a confirmation.
This is similar to have a return confirm ("sure?") in the onclick event of a hyperlink, to fire a traditional js confirm
So far I have only got this:
<asp:ScriptManager
ID="man"
runat="server"
/>
[Code]....
how I can manually call the ConfirmButton with an onclick even in the hyperlink, and return true or false?
I am new to website development, so please be gentle!I am having difficulties in stopping a hyperlink to a Excel spreadsheet on my page from being cached by our proxyserver.The spreadsheet is updated on the web server in the background everytime a user updates a sql record, however because the hyperlink is to a static name, when the user clicks on the link, often a older version of the spreadsheet is opened.I have tried many caching parameters without joy and was wondering if it is possible to create a dynamic hyperlink that always looks for the latest version of the spreadsheet ?For example if I append onto the spreadsheet the date and time everytime the spreadsheet is updated, will the hyperlink be able to find it ?All my website code has been written in asp to date.
View 3 Repliesi have declared two control in my master page , how wants to call this
menu control in child page ( that is login page)
i want to bind the menu control dynamically based on login previlage
public Menu newMenu = new Menu();
public MenuItem newItem = new MenuItem("Master");
I would like to add a column in my datagridview that takes the value from the database and asigns it to the text of a linkbutton or make it a hyperlink. i know how to handle getting the value from the row but dont
know how to make a value a link, or set the text to a link button
I have a Webform with a TextBox (Static) and 3 TextBox (Dynamic - based on the following article: [URL].... )
How to use this scenario with a single GridView table?
Based on the User input, the GridView might have (1 + 3) columns; (1 + 6) columns; (1 + 9) columns; ...etc.
im creating dynamic buttons on page load and on the click event of button1 handlere iam creating more buttons this is going fine but on click event of button 2 work is not done so how to maintain a chain of creation of button on click events
protected void Button2_Click(object sender, EventArgs e)//
{
ClientScript.RegisterClientScriptBlock(this.GetType(), ((Button)sender).ID, "<script>alert('Button_Click');</script>");
Response.Write(DateTime.Now.ToString() + ": " + ((Button)sender).ID + " was clicked");
}
protected void Button_Click(object sender, EventArgs e)//this button click will call all the items related to department
[code]....
my code<asp:HyperLink ID="HyperLink8" runat="server" NavigateUrl='~/default.aspx?id=<%# Eval("id") %>&name=<%# Eval("name") %>'></asp:HyperLink>it don't work!
View 5 Replies