I am new to asp.net. I am suppose to continue a project. The previous person has created a line chart and I have to create a bar chart. However I do not know how to create a bar chart. Could u email me for the code as I realise that I can't upload the files.
View 5 RepliesI have 2 MS Charts(OriginalChart, encryptedChart) which are working well. I spent hrs trying to set these charts so that they display the same AxisY value. Example, OriginalChart displaying max AxisY value 50 (this value may change depends on the data), I need the encryptedChart to display max AxisY value 50 (regardless of its data) as well, This would allow user to compare the differences in these chart more easily. Currently, my encryptedChart is showing 5 to 10 for the AxisY value. I tried most of the possibility to set below but no luck. Research on this also not much useful info (or I don't understand them.)
"encryptedChart.ChartAreas(0).AxisY.ScaleView.... = OriginalChart.ChartAreas(0).AxisY.ScaleView....."
Below's my HTML code fyi.
[Code]....
I am using Mschart in that I want to display null value or zero value in pie chart. How to display that.
View 2 RepliesWhen I try to generate a StackedBar char, some Y fields are not displaying because of space. Example with following chart
Ex :columns in DataSource : 2,4,6,8,10
Columns displayed on chart : 2,6,10
I have use chart controller in my web application but it display wrong percentages this are the value:
TOTAL COST : 75000000000.00
LOYALTY DISCOUNT : 7500000000.00
When it display on pie chart it display TOTAL COST :90.91% and LOYALTY DISCOUNT=9.09%
but it should be 90% and 10 % how can I correct it
chtSavingBrekDown.Series["Series1"].Points.AddXY("Total Cost", totalCost);
chtSavingBrekDown.Series["Series1"].Points.AddXY("Discounted Dolers", discountValue);
chtSavingBrekDown.Series["Series1"].ChartType = SeriesChartType.Pie;// Set the Pie width
//chtSavingBrekDown.Series["Series1"]["PointWidth"] = "0.5";// Show data points labels
chtSavingBrekDown.Series["Series1"].IsVisibleInLegend = true;
chtSavingBrekDown.Series["Series1"].LegendText = "#AXISLABEL";
chtSavingBrekDown.Series["Series1"].Label = "#PERCENT";
chtSavingBrekDown.Series["Series1"]["BarLabelStyle"] = "Center";// Show chart as 3D
chtSavingBrekDown.ChartAreas["ChartArea1"].Area3DStyle.Enable3D = true;// Draw chart as 3D
chtSavingBrekDown.Series["Series1"]["DrawingStyle"] = "Cylinder";
chtSavingBrekDown.Series["Series1"].Points[1].Color = System.Drawing.Color.Yellow;
chtSavingBrekDown.Series["Series1"].Points[0].Color = System.Drawing.Color.Blue;
chtSavingBrekDown.Series["Series1"].Points[1]["Exploded"] = "true";
chtSavingBrekDown.Legends[0].Enabled = true;
chtSavingBrekDown.Titles[0].Text = "SAVING ESTIMATE BREAKDOWN";
I am using asp:chart control in my 3.5 application. My dataset have three columns i.e. Subject, Score, testDate. I am drawing the chart like this,
[Code]....
And my chart is displaying like this. And what I want is, the third column testDate should be displayed on the top of the series as follows.
I have a chart to display the percentage of available time for a machine, but it won't display all the labels. It will only display a select few, spread out evenly apart but I need it to show ALL of them. Here is how it's set up, however, I don't know what I would change in order for it to display all labels:
[Code]....
I am working on charts with ms chart 3.5 control my question is I have to display legends of pie charts in tabular form. Which will contain the color used for different points and x values and y values. I managed to show the colors and x values but not able to show the y values. I am giving the code also. Example of x and y values are:
xvalues- InCorrect YValue- 5
xvalues- Correct YValue- 10
xvalues- UnAttempted YValue- 15
Here is the code used to bind legend values.----
LegendCellColumn firstColumn = new LegendCellColumn();
firstColumn.ColumnType = LegendCellColumnType.SeriesSymbol;
firstColumn.HeaderText = "Color";
firstColumn.HeaderBackColor = Color.WhiteSmoke;
Chart1.Legends["Default"].CellColumns.Add(firstColumn);
// Add second cell column
LegendCellColumn secondColumn = new LegendCellColumn();
secondColumn.ColumnType = LegendCellColumnType.Text;
secondColumn.HeaderText = "Name";
secondColumn.Text = "#LEGENDTEXT";
secondColumn.HeaderBackColor = Color.White;
secondColumn.Alignment = System.Drawing.ContentAlignment.MiddleLeft;
Chart1.Legends["Default"].CellColumns.Add(secondColumn);
// Add header separator of type line
Chart1.Legends["Default"].HeaderSeparator = LegendSeparatorStyle.Line;
Chart1.Legends["Default"].HeaderSeparatorColor = Color.FromArgb(64, 64, 64, 64);
// Add item column separator of type line
Chart1.Legends["Default"].ItemColumnSeparator = LegendSeparatorStyle.Line;
Chart1.Legends["Default"].ItemColumnSeparatorColor = Color.FromArgb(64, 64, 64, 64);
// Set Min cell column attributes
LegendCellColumn minColumn = new LegendCellColumn();
minColumn.Alignment = System.Drawing.ContentAlignment.MiddleLeft;
minColumn.Text ="#TOTAL{N1}";
I want to show the individual value of each data point is there any idea how to show the Yvalue of each datapoints
minColumn.HeaderText = "Questions";
minColumn.Name = "Questions";
minColumn.HeaderBackColor = Color.WhiteSmoke;
Chart1.Legends["Default"].CellColumns.Add(minColumn);
I have an issue in using dot net chart control. In chart last column is not completely shown which give bad appearance and on right side of chart it looks like TickMark are enabled. I set MajorTickMark of AxisY2 disabled but still tick marks on right side.
View 2 Replieshow to freeze the x axis of the chart control in ms chart? need to use because data displayed at large amount that is scrollable.
View 1 RepliesI have a drop downlist,and next to it there is an MS bar chart.i want to change the datate of the MS chart ,once the user selects another year from the dropdownlist.
When the page loads ,the chart displays the default year(2011) and it works.The problem is that is does not change the data when you select another year from the dropdownlist.
Am I going mad/blind? Probably a combination of the two.
How does one go about removing the data labels from a pie chart with the new chart control in .net 4?
I can get these to display as tooltips absolutely fine, but ultiamtely I'd like the labels not to be present as it looks rather busy.
I've searched previous answers and seen code behind resolutions but surely there must be some sort of code infront option to turn these labels off?
I am using MS Chart control (3.5), and have a requirement where I need to display 2 pie charts. The datapoints for the pie charts is set programatically. My doubts are as follows:
1. Can I display both the pie charts in a single chart control and area, or do I have to use two controls? (Currently I am using two controls)
2. How can I maintain the same size for both the pie charts? This is my main concern, since the pie sizes keep changing, depending on the number of datapoints. I tried using custom properties like "MinimumRelativePieSize", but it's not working.
i'm trying to create a stacked bar chart on a vb web form using vs2010.My data source returns:
Error in Functionality Awaiting on Supplier
1IMT IssuesmActive6
IMT Issues,Awaiting on Supplier
2,IMT Issues,Awaiting on User 4
IMT Issues Closed 120
Login / Password Active
But I can't get this into a stacked chart. I know I must have to do quite a bit of work declaring what the series are and soforth, or having a different dataset but can't find any documentation on it.A link to some documentation or an example of a stacked chart from an sql datasource would be much appreciated.
I started using the awesome chart controls with my asp.net apps recently and so far they've been nothing short of breath taking. Right now I have a weird problem, on the first load of my page, the chart control appears correctly and the tooltip is correct, however, when I update it with new data, the chart displays correctly, but the tooltips are for the previous set of data.
I hope this makes sense. The first time I load the chart, the pie chart segments and tooltips are correct, after a partial postback (to get the new data), the pie chart segments are correct but the tooltips are for the previous data set.
Basically once the tooltips are set the first time, they can't be updated after that without a full page postback.
Here's how I set the tooltip:
[Code]....
Anyone else noticed this behaviour and have a work around?
Currently my only workaround is to check for a partial postback and not render the tooltip, which I'd rather not do as the tooltip display actual statistical data as opposed to the pie itself (which uses percentages).
I have a table where I have
Amount paid, payment date
I want to write a query which will fetch the total amount of sales for a month based on the payment date.
And i want to represent the result in a pie chart like january(3000),february(90000),march(20000) etc.
how to display barchart in gridview of one column depending on that cell value
View 1 RepliesIam having simple chart.
Which is displaying X and Y values.
Iam using SqlDataSource control to Bind data from database.
Now, How to display Sum of X values on top of chart ?
Is there a way to display a "default" message on a MS Chart Control if there is no data to chart?
I have a chart, with some controls that allow the user to pick various date ranges. If there is no data to be charted in that date range, it currently just displays nothing (or at least it shows the legend, and background, but that's it.)
I want there to be a message saying "no data for this period" or something instead.
We need to visualize the number of forms submitted over a 2 week period where it is broken down by day/hour.
I have the query returning data such as:
My question is, how do I tell MS chart to display this data? When I bind it I get the following:
I'd like it to expand out and show the hours between the dates.
Does anyone know how to explode a certain section of the piechart, which is part of microsoft chart controls?
View 5 RepliesI have an ASP Chart (v4) which displays the data I need perfectly. I want it to show labels at the top of the data points and I am having some difficulty with it.
Here is my code that works for both series but does not display the labels:
[code]....
I am new to Chart controls and I'm trying to display a label (text) for a datapoint in a chart instead of a value.
I'm using the following code to load the datapoints and to add label information for each point (each label will be different).
But when the chart is displayed all datapoint labels are blank (if I use the first line of code) or the labels are all the same, containing the last rows value (if I use the 2nd line of code).
Can someone tell me what I am doing wrong? Is there something in the .aspx that I need to set?
[Code]....
For example:
I have 3 rows in my grid with the label data: "Cat", "Dog", "Mouse". But the label in my chart is blank for all points when I use the first line of code and when I use the second line of code the label is "Mouse" for all points.
I am trying to display a web page on the server that has a MS Chart in it using and IFrame. It renders the page except the Chart. it show the box of the chart with a red X in it. No errors. However if i set the url to a link button it works fine or if i paste the url in IE it works fine.
View 1 RepliesWhat is the name of chart
View 6 Replies