Forms Data Controls :: Display Legends Of Chart In Tabular Form
Oct 13, 2010
I am working on charts with ms chart 3.5 control my question is I have to display legends of pie charts in tabular form. Which will contain the color used for different points and x values and y values. I managed to show the colors and x values but not able to show the y values. I am giving the code also. Example of x and y values are:
xvalues- InCorrect YValue- 5
xvalues- Correct YValue- 10
xvalues- UnAttempted YValue- 15
Here is the code used to bind legend values.----
LegendCellColumn firstColumn = new LegendCellColumn();
firstColumn.ColumnType = LegendCellColumnType.SeriesSymbol;
firstColumn.HeaderText = "Color";
firstColumn.HeaderBackColor = Color.WhiteSmoke;
Chart1.Legends["Default"].CellColumns.Add(firstColumn);
// Add second cell column
LegendCellColumn secondColumn = new LegendCellColumn();
secondColumn.ColumnType = LegendCellColumnType.Text;
secondColumn.HeaderText = "Name";
secondColumn.Text = "#LEGENDTEXT";
secondColumn.HeaderBackColor = Color.White;
secondColumn.Alignment = System.Drawing.ContentAlignment.MiddleLeft;
Chart1.Legends["Default"].CellColumns.Add(secondColumn);
// Add header separator of type line
Chart1.Legends["Default"].HeaderSeparator = LegendSeparatorStyle.Line;
Chart1.Legends["Default"].HeaderSeparatorColor = Color.FromArgb(64, 64, 64, 64);
// Add item column separator of type line
Chart1.Legends["Default"].ItemColumnSeparator = LegendSeparatorStyle.Line;
Chart1.Legends["Default"].ItemColumnSeparatorColor = Color.FromArgb(64, 64, 64, 64);
// Set Min cell column attributes
LegendCellColumn minColumn = new LegendCellColumn();
minColumn.Alignment = System.Drawing.ContentAlignment.MiddleLeft;
minColumn.Text ="#TOTAL{N1}";
I want to show the individual value of each data point is there any idea how to show the Yvalue of each datapoints
minColumn.HeaderText = "Questions";
minColumn.Name = "Questions";
minColumn.HeaderBackColor = Color.WhiteSmoke;
Chart1.Legends["Default"].CellColumns.Add(minColumn);
As you see above , we have more data in pie chart to plot and hence 3 DOTS appear at right bottom. Hence user cant see all the legends.Is it possible to have.say a tooltip on 3 DOTS so that when an user hovers,he sees entire / remaining legend list?
I am new to asp.net. I am suppose to continue a project. The previous person has created a line chart and I have to create a bar chart. However I do not know how to create a bar chart. Could u email me for the code as I realise that I can't upload the files.
I have 2 MS Charts(OriginalChart, encryptedChart) which are working well. I spent hrs trying to set these charts so that they display the same AxisY value. Example, OriginalChart displaying max AxisY value 50 (this value may change depends on the data), I need the encryptedChart to display max AxisY value 50 (regardless of its data) as well, This would allow user to compare the differences in these chart more easily. Currently, my encryptedChart is showing 5 to 10 for the AxisY value. I tried most of the possibility to set below but no luck. Research on this also not much useful info (or I don't understand them.)
"encryptedChart.ChartAreas(0).AxisY.ScaleView.... = OriginalChart.ChartAreas(0).AxisY.ScaleView....." Below's my HTML code fyi. [Code]....
When I try to generate a StackedBar char, some Y fields are not displaying because of space. Example with following chart Ex :columns in DataSource : 2,4,6,8,10 Columns displayed on chart : 2,6,10
I have use chart controller in my web application but it display wrong percentages this are the value: TOTAL COST : 75000000000.00 LOYALTY DISCOUNT : 7500000000.00
When it display on pie chart it display TOTAL COST :90.91% and LOYALTY DISCOUNT=9.09% but it should be 90% and 10 % how can I correct it chtSavingBrekDown.Series["Series1"].Points.AddXY("Total Cost", totalCost); chtSavingBrekDown.Series["Series1"].Points.AddXY("Discounted Dolers", discountValue); chtSavingBrekDown.Series["Series1"].ChartType = SeriesChartType.Pie;// Set the Pie width //chtSavingBrekDown.Series["Series1"]["PointWidth"] = "0.5";// Show data points labels chtSavingBrekDown.Series["Series1"].IsVisibleInLegend = true; chtSavingBrekDown.Series["Series1"].LegendText = "#AXISLABEL"; chtSavingBrekDown.Series["Series1"].Label = "#PERCENT"; chtSavingBrekDown.Series["Series1"]["BarLabelStyle"] = "Center";// Show chart as 3D chtSavingBrekDown.ChartAreas["ChartArea1"].Area3DStyle.Enable3D = true;// Draw chart as 3D chtSavingBrekDown.Series["Series1"]["DrawingStyle"] = "Cylinder"; chtSavingBrekDown.Series["Series1"].Points[1].Color = System.Drawing.Color.Yellow; chtSavingBrekDown.Series["Series1"].Points[0].Color = System.Drawing.Color.Blue; chtSavingBrekDown.Series["Series1"].Points[1]["Exploded"] = "true"; chtSavingBrekDown.Legends[0].Enabled = true; chtSavingBrekDown.Titles[0].Text = "SAVING ESTIMATE BREAKDOWN";
I am using asp:chart control in my 3.5 application. My dataset have three columns i.e. Subject, Score, testDate. I am drawing the chart like this, [Code].... And my chart is displaying like this. And what I want is, the third column testDate should be displayed on the top of the series as follows.
I want to learn how to show html in a situation of a tabular format to One To Manyto make me understand I have the categories and subcategories for each category I wish we were all subcategories.I tried with a DataList, but the categories repeated for each subcategoryIs there a way to do it. For example in asp.net mvc I wrote everything in aspx page
I have a chart to display the percentage of available time for a machine, but it won't display all the labels. It will only display a select few, spread out evenly apart but I need it to show ALL of them. Here is how it's set up, however, I don't know what I would change in order for it to display all labels: [Code]....
I have an issue in using dot net chart control. In chart last column is not completely shown which give bad appearance and on right side of chart it looks like TickMark are enabled. I set MajorTickMark of AxisY2 disabled but still tick marks on right side.
I have a drop downlist,and next to it there is an MS bar chart.i want to change the datate of the MS chart ,once the user selects another year from the dropdownlist.
When the page loads ,the chart displays the default year(2011) and it works.The problem is that is does not change the data when you select another year from the dropdownlist.
I am using MS Chart control (3.5), and have a requirement where I need to display 2 pie charts. The datapoints for the pie charts is set programatically. My doubts are as follows:
1. Can I display both the pie charts in a single chart control and area, or do I have to use two controls? (Currently I am using two controls)
2. How can I maintain the same size for both the pie charts? This is my main concern, since the pie sizes keep changing, depending on the number of datapoints. I tried using custom properties like "MinimumRelativePieSize", but it's not working.
i'm trying to create a stacked bar chart on a vb web form using vs2010.My data source returns:
Error in Functionality Awaiting on Supplier
1IMT IssuesmActive6
IMT Issues,Awaiting on Supplier
2,IMT Issues,Awaiting on User 4
IMT Issues Closed 120
Login / Password Active
But I can't get this into a stacked chart. I know I must have to do quite a bit of work declaring what the series are and soforth, or having a different dataset but can't find any documentation on it.A link to some documentation or an example of a stacked chart from an sql datasource would be much appreciated.
I started using the awesome chart controls with my asp.net apps recently and so far they've been nothing short of breath taking. Right now I have a weird problem, on the first load of my page, the chart control appears correctly and the tooltip is correct, however, when I update it with new data, the chart displays correctly, but the tooltips are for the previous set of data.
I hope this makes sense. The first time I load the chart, the pie chart segments and tooltips are correct, after a partial postback (to get the new data), the pie chart segments are correct but the tooltips are for the previous data set.
Basically once the tooltips are set the first time, they can't be updated after that without a full page postback.
Here's how I set the tooltip:
[Code]....
Anyone else noticed this behaviour and have a work around?
Currently my only workaround is to check for a partial postback and not render the tooltip, which I'd rather not do as the tooltip display actual statistical data as opposed to the pie itself (which uses percentages).
I am writing an insert form (like a survey/questionaire) for a web site to collection data that will call for interactively displaying data from one table after the user enters data for the form; I think it would be like a lookup in standadrd db design, however based on the using it on the web I get stuck on the exact coding requirements.I am currently using Visual Web Designer 2008 Express with the smartdbforms.net tool loaded to create insert, edit & update data to a MSSQL2008 db.
Example:
A Customer logs in to the website and chooses the link to enter data to the database. I have a blank insert mode form for them to fill in the answers to 12 questions (using a smartdbforms.net insert form). The first box is for them to enter their ID#. What I would like is for the first and last name of the user to be displayed on the form (next to the entry box)based on a lookup of the ID# they entered and have it display after they enter it. That data is stored in a differnet table in the SQL2008 db.The db is setup with a insert form data table (empty), and various data info tables that are prefilled to use for validation and edit. I am a windows db designer who is new to the ASP.Net web interfacing commands.
I would like to know how i could display data from an itemtemplate or any other form views/data-bound controls without having it render in tables? i know theres control adaptors, but is this reliable and will it work with asp.net 3.5?
I am populating data into formfields when i select checkbox in a grid view with the following code.I have 20 record set in database,Quotenumber(Main column) starts 3001 ,3002,3003..........3020.I am allowing duplicate entries meant that i have 4 recordset only on 3000 quotenumber like wise i may have 3or more record set on 3010,problem here is when i select first one of 3000(Quotenumber) it is supposed to populate the record set of first one of 3000 but only last one of 3000(quotenumber) is getting populated into form field.Can any one provide solution to this.
Code for Populating Data into formfield when you select checkbox ina grid view.
Dim indx As Integer Dim connectionString As String = "Database=xxxx;" & "Data Source=localhost;" & "User Id=root;Password=xxxx" Dim query As String = "SELECT QuoteNumber,Revision,Vendor,PartNumber FROM quotes order by QuoteNumber" Dim connection As New MySqlConnection(connectionString) Dim da As New MySqlDataAdapter(query, connection) Dim ds As New DataSet() Dim myAdapter As New MySqlDataAdapter myAdapter = New MySqlDataAdapter(query, connection) myAdapter.Fill(ds, "QUOTES") Dim dt As DataTable = New DataTable() 'DataTable Initializes a new instance of the DataTable class with no arguments. da.Fill(dt) Dim checkbox As CheckBox = CType(sender, CheckBox) checkbox.Checked = True Dim row As GridViewRow = CType(checkbox.NamingContainer, GridViewRow) Dim i As Integer For i = 0 To dt.Rows.Count - 1 Step i + 1 If (dt.Rows(i)("QuoteNumber").ToString = row.Cells(1).Text.ToString()) Then indx = i End If Next DDQuote.Text = dt.Rows(indx)("QuoteNumber").ToString() txtRev.Text = dt.Rows(indx)("Revision").ToString() DDVend.Text = dt.Rows(indx)("Vendor").ToString() txtPart.Text = dt.Rows(indx)("PartNumber").ToString()