How do I disable the DataGrid controls in ItemCommand using VB.For Example I have dropdownlist bound in my DataGrid. Now I want to Disable this control in Datagrid_ItemCommand.I tried like this
View 9 RepliesI use the following with datagrid to call itemcommand or update command etc, and i do this:
If e.CommandName = "doAdd" Then
End If What is the equivalent check in gridview?
The postback occurs, but the event doesn't fire.
[Code]....
I have a ListView that is managing a link click event through the OnItemCommand and the list pages the data.
<asp:ListView
runat="server"
ID="lvRequests"
ItemPlaceholderID="litPlaceHolder"
OnItemCommand="lvRequests_ItemCommand"
DataSourceID="odsResults"
OnItemDataBound="lvRequests_ItemDataBound">
<LayoutTemplate>
</LayoutTemplate>
<ItemTemplate>
<tr>
<td>
<asp:Label runat="server" ID="lblSPNMatch" Visible="false" />......................
This is my Datalist control with an image button in footer. I am just pasting the declaration and footer template
[Code]....
And this is my CB:
[Code]....
When I click the button image residing in footer template i just posts back and don't go to the itemcommand event.
I have a checkbox inside the item template of a datalist, dtlLate. I want to detect the checkbox change and execute a stored procedure. When I click the checkbox a postback does occur but the dtl Late itemcommand doesn't fire. I am not rebinding the datalist on postback. I have tried with viewstate enabled and disabled. I have used Bold text for the dtlLate in the content page and in the codebehind to make it easy to find.
[Code]....
I have a datalist in my page that has a LinkButton at the beginning of each row that, when clicked, fires the Itemcommand ("select"). There is no issue with this as it works as it should:
[Code]....
But I also thought it would be good if the user could simply click anywhere in the datalist to expand the item and show based on the SelectedItemTemplate. So, I thought, the cleanest would be to add a function in the code behind that adds a click event to the Panel "panItem" that clicks the above mentioned LinkButton like this (fires in Page_PreRender):
[Code]....
Here is where the problem comes in. This works great in IE but not FF3.6 (havent tested it with older version of FF). In FF, I get a JS error saying "dlMapDB_ctl00_btnItemFigNumber is not defined" for the first row, "...ctl01..." for the second row, etc. So the IDs are correct based on the markup (which makes sense since it works in IE).
I have a repeater which does quite expensive processing when it is populated. It gets the info from a web service which is itself a federated search service and will take 15 to 20 seconds to return results.
In each repeater item/alternatingitem, i have 3 imagebuttons doing some actions (saving in session some ID's, updating some custom collections...) , the problem is when clicking on one of the buttons, the repeater will trigger the command and then databind again, which takes quite some time to process again..
I have a details view to insert some data. I want to validate this data myself. use the ItemCommand to trap the insert command. If the data entered does not match what I need, I want to somehow stop the insert procedure at this point.
View 3 RepliesThe DetailsView control has in its
Events an
ItemCommand event that uses the
DetailsViewCommandEventArgs event arg class which has a
CommandName property.
My questions are...
What are the possible values (e.g. "Select", "Insert", etc.) for this CommandName property when operating a standard, uncustomized DetailsView control?
Which order do the following fire in?
ItemCommand
ItemCreated
ItemDeleted
ItemDeleting
ItemInserted
ItemInserting
ItemUpdated
ItemUpdating
The "ing" events are currently being intercepted so that if the user doesn't have permission I set the e.Cancel = true and the "ed" events have redirects to send the user back to a list page that shows the items they just added/updated/deleted. However, I am not able to capture the Cancel button on the DetailsView control since there's no event for it. What I want is to redirect the user back to the list page if they click on Cancel as well.
I've got a GridView control with LinkButtons in different cells. Currently when someone clicks a link, it fires the ItemCommand passing the CommandName and the ID of the item the link is bound to. That all works fine. I need to modify it now to not use links anymore. It now needs to show a popup balloon with a link (styled to look like a button) and when the link is clicked, I want it to do the exact same thing. I'm sure there are several ways of doing this, but for time's and consistency's sake, I'm copying the method used from another page we have that is already doing this. It has a hidden DIV on the page with the link in it. When you hover over a link, javascript repositions the div and makes it visible.
So what I need to do is pass my CommandName and item ID to the javascript so that it can trigger the postback when they click that single link. I know this is not the only way to get to the end result, but what I want to do if possible, is still fire the GridView's ItemCommand and set he DataListCommandEventArgs' CommandName and CommandArgument properties. Can someone explain how, under normal circumstances, clicking the LinkButton in the GridView fires the ItemCommand? I know that the LinkButton's click event is forwarded to the GridView but what gets sent from the client side that let's the server know the link was clicked?
I am upgrading a website project from asp.net 3.5 to 4.0. I went through the upgrade wizard and site compiled and built fine. But immediately I have encountetred a problem.I have 3 nested ListViews all using the ItemCommand event. Under 4.0 once the ItemCommand event has fired on the inner ListView it then bubbles up and fires on the parent and finally the grandparent.This is a change in behaviour from 3.5 where only the inner ListView event fires. While I can code round this I am worried about these subtly changes between the two versions.
View 1 RepliesI'm building a navigationmenu and for that I create repeatercontrol dynamicly from codebehind. This works fine with the exception that the ItemCommand event is not firing. The ItemDataBound-event I bind to the repeater-control is working fine. Can somehow tell me what I'm doing from.
Code ASPX
<div id="subnavigation">
<asp:PlaceHolder ID="phControl" runat="server"></asp:PlaceHolder>
</div>
[code]...
I have a User Control that contains a ListView. In the user control's code is this event handler:
protected void listView1_ItemCommand(object source, ListViewCommandEventArgs e)
{
Button_ClickHandler(source, e);
}
What's occurring is that I'm explicitly firing an event so that the parent web page can monitor this and take appropriate actions. Thus when the user clicks on a different ListViewItem it triggers the population of associated data elsewhere on the web page.
This all works fine except for one thing: When I first load the control I'm pre-setting the first ListViewItem. Unfortunately, just setting the ListView's SelectedIndex = 0 doesn't fire the aforementioned event handler.
So I started investigating how to call "listView1_ItemCommand" but couldn't figure out how to instantiate the "e" parameter.
I have a formview and a few buttons outside the formview. How can i access the formview.itemcommand event if the buttons are not in the formview?
View 9 RepliesI have 2 grids gvParent & gvChild I would like to filter gvChild when a row is selected in gvParent the linking fields are contractNo
I added a column for selecting:
<asp:TemplateField ShowHeader="False">
<ItemTemplate>
<asp:LinkButton ID="LinkButton1" runat="server" CausesValidation="False" CommandName="Select"
OnClick="LinkButton1_Click" Text="Select"></asp:LinkButton>
</ItemTemplate>
</asp:TemplateField>
I know how to handle the filtering of the grid (create a criteria and set to rowfilter of the dataview) But, I dont know how to get the value of the column of the selected row.
The following code successfully displays a record in a FormView and sets the FormView mode to 'Edit' when the user clicks on a LinkButton within a Repeater, however the record is not Updated. If I don't change the .SelectCommand and call .DataBind, I'm able to update the first record that is displayed. Naturally that's a moot point because the idea is to be able to update the record that the user selects in the Repeater.Because of the design of the FormView and Repeater, the record *must* be updated via the FormView. Updating the record via the Repeater is not an option.
[Code]....
I have Datagrid , i want to clcik on row and get data in textbox , but my textbox is FreeTextBox control,i tried to use javascript but work for asp.net control not working for freetext box control, how i can capture this code is sample code but it work for asp.net control but not working for my freetextbox
[Code]....
Simply put... I want to duplicate the example found at this link, in VB.net rather than C#.
[URL]
I would like the selectedvalue of the dropdown to display additional data base on its selection in multiple text boxes.
I have tried using the DropDownList OnSelectedIndexChanged property, within a DataGrid EditiItemTemplate, but I cannot retrieve data from the selection. (AutoPostBack is "True"). I can however use a button onclick event to fire a "prre-defined" selection value.
I have 2 datagrid (using .net 1.1). I need to access column of second grid ( i need to make a column of second grid as disabled) when i click "Cancel" link button in First Grid. How can this be done?
View 7 RepliesI have "Order" object with Columns Ticket,OTP and CustomerName etc.Intially on DataGrid, I'm binding Ticket only , when user clicks on "Column Chooser" button, another windows appears to pickup CustomerName,OTP columns to add specified column dynamically on Datagrid. Environment : Asp.net ,C# with Object Data source
Public Class Order
{
publc void Order()
{
}
public string Ticket
{
get
{
return this.strTicket;
}
set
{
this.strTicket = value;
}
}
public string OtpNumber
{
get
{
return this.strOtpNumber;
}
set
{
this.strOtpNumber = value;
}
}
public string CustomerName
{
get
{
return this.strCustomer;
}
set
{
this.strCustomer = value;
}
}
}
}
i use datalist and item command event is not fire in vb
My aspx code like
<asp:DataList ID="DataList1" runat="server" RepeatColumns="2" RepeatDirection="Horizontal" OnItemCommand="DataList1_ItemCommand"
Width="100%" EnableViewState="true" >
<ItemStyle VerticalAlign="Top" Width="50%" />
<ItemTemplate>
[Code] .....
I have a dynamic gridview in which i need to add textbox, checkbox, imgButton in the cell dynamically.
At the moment user click on the imbgutton, a click event fire and i need to capture the user input on the checkbox and textbox of the particular cell.
I have problem in finding out the checkbox and textbox control in the imgbutton click event. The cause is i do not know which row in the gridview i need to search to for the control.
I have try gridview.Fincontrol but fail.
using the GridView FindControl.
What I've done is I've setup a Gridview with a datasource to show only 1 of the columns I need from the datasource, but I also have another ItemTemplate Column in which I have a dropdownlist with another datasource that I've bound to the dropdownlist.
What I need to do is have the dropdownlist show the selected one when compared to a id from datasource in the gridview.
i have button field in grid view, basicly i want to show to in some of the row only, but i cant find the "ID" using find control
This is my aspx code
[code]....