I have a details view to insert some data. I want to validate this data myself. use the ItemCommand to trap the insert command. If the data entered does not match what I need, I want to somehow stop the insert procedure at this point.
View 3 Replies
I use the following with datagrid to call itemcommand or update command etc, and i do this:
If e.CommandName = "doAdd" Then
End If What is the equivalent check in gridview?
I want to issue an INSERT command for an SQL Server table using DataAdapter without first issuing a SELECT command. Could anybody send me lines of code to handle this? Also how do i manage INSERT into selective table columns (I have 10 columns but i only want to update 2 of them)?
View 2 RepliesMy web form contains a detailsview control that I have added a templated field to with a DropDownList in the InsertItemTemplate. The DetailsView default mode is 'insert. My detailsview is attached to a sqldatasource that has a stored procedure in the db to handle the insert. When I enter data in the fields and select insert all values from the detailsview are written to the table except for the selection that was made in the dropdownlist. I am using the ddl.selecteditem.value to populate my variable however when the insert method is envoked it doesn't send my value. The DDL value that I am capturing does not need to be written to the table it is just a flag for some variables that need to be set at the stored proc level. How do I get the DDL selected value to be sent with the insert statement?
Here is my code behind:
Protected
Sub
DropDownList1_SelectedIndexChanged(ByVal sender
As
Object,
ByVal e
As System.EventArgs)
Dim temp
As DropDownList
Dim AccessLevel
As
String
temp = AddUserDetailsView.FindControl("DropDownList1")End
Sub
AccessLevel = temp.SelectedItem.Value
Label1.Text = AccessLevel
I want to click on a date in the calendar and use that date in an insert command.
I have inserted a Calendar in Visual Web Developer and cannot figure out how to get the date so i can use it when inserting a new entry in my table... how do i "catch" the date and how to insert it as date.
I have the insert command working with dummy fields...
I am collecting user data using 3 detailsView, dv1,dv2, and dv3 each connected to sqldatasource , ds1,ds2,ds3. I would like the user to click one button(InsertBtn) and add all the data entered in each detailsview. I added
ds1.insert();
ds2.insert();
ds3.insert();
to OnClick event of InsertBtn. But the data does not get inserted...?? How can I make the user click one button and add the datas in each detalsView to database..???
I working on a ASP.net project, database is MS SQL
for a reason that cannot find why, when I insert an entry to the data base, the entry is duplicated.
The controll runs this:
Protected Sub grdCustomer_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles grdCustomer.SelectedIndexChanged
Dim Quote As New QuoteBLL
Dim Customer As New BeeSafeShutterSystemTableAdapters.CustomerTableAdapter
[Code]....
I've added a simple SqlDataSource to my site with insert properties. I've also created some code behind to capture the insert command (oninserting="SqlDataSource_NewsLetterSubscription_Inserting").
Thing is how do I actually trigger the command to 'insert' from a standard button?
<asp:SqlDataSource ID="SqlDataSource_NewsLetterSubscription" runat="server"
I would like to know if I can do the following: when I am in insert mode, can I dynamically change the select command of and then display that result in the second dropdownlist based on what was selected in the first dropdownlist.
I would like to include the minimum code to demonstrate what I am trying to do.
[Code]....
[Code]....
i'm trying to issue a select command in my app soi could execute the command and retrive the data into a string variable.the problem is that this command is overloaded with DataSourceSelectArgument and i can't figure out what it is.i'm using sql server express and when issue a n insert command for example sq.Insert(); i have no problems.this the command that's holding me:
SqlDataSource sq = new SqlDataSource();
sq.ConnectionString = ConfigurationManager.ConnectionStrings["CustomerDatabaseConnectionString1"].ToString();
sq.SelectCommandType = SqlDataSourceCommandType.Text;
sq.SelectCommand = "SELECT * FROM CustomerTable where customerID = 1";
string result = sq.Select(some overload that's stopping me);
The postback occurs, but the event doesn't fire.
[Code]....
I have a ListView that is managing a link click event through the OnItemCommand and the list pages the data.
<asp:ListView
runat="server"
ID="lvRequests"
ItemPlaceholderID="litPlaceHolder"
OnItemCommand="lvRequests_ItemCommand"
DataSourceID="odsResults"
OnItemDataBound="lvRequests_ItemDataBound">
<LayoutTemplate>
</LayoutTemplate>
<ItemTemplate>
<tr>
<td>
<asp:Label runat="server" ID="lblSPNMatch" Visible="false" />......................
This is my Datalist control with an image button in footer. I am just pasting the declaration and footer template
[Code]....
And this is my CB:
[Code]....
When I click the button image residing in footer template i just posts back and don't go to the itemcommand event.
How do I disable the DataGrid controls in ItemCommand using VB.For Example I have dropdownlist bound in my DataGrid. Now I want to Disable this control in Datagrid_ItemCommand.I tried like this
View 9 RepliesI have a checkbox inside the item template of a datalist, dtlLate. I want to detect the checkbox change and execute a stored procedure. When I click the checkbox a postback does occur but the dtl Late itemcommand doesn't fire. I am not rebinding the datalist on postback. I have tried with viewstate enabled and disabled. I have used Bold text for the dtlLate in the content page and in the codebehind to make it easy to find.
[Code]....
I have a datalist in my page that has a LinkButton at the beginning of each row that, when clicked, fires the Itemcommand ("select"). There is no issue with this as it works as it should:
[Code]....
But I also thought it would be good if the user could simply click anywhere in the datalist to expand the item and show based on the SelectedItemTemplate. So, I thought, the cleanest would be to add a function in the code behind that adds a click event to the Panel "panItem" that clicks the above mentioned LinkButton like this (fires in Page_PreRender):
[Code]....
Here is where the problem comes in. This works great in IE but not FF3.6 (havent tested it with older version of FF). In FF, I get a JS error saying "dlMapDB_ctl00_btnItemFigNumber is not defined" for the first row, "...ctl01..." for the second row, etc. So the IDs are correct based on the markup (which makes sense since it works in IE).
I have a repeater which does quite expensive processing when it is populated. It gets the info from a web service which is itself a federated search service and will take 15 to 20 seconds to return results.
In each repeater item/alternatingitem, i have 3 imagebuttons doing some actions (saving in session some ID's, updating some custom collections...) , the problem is when clicking on one of the buttons, the repeater will trigger the command and then databind again, which takes quite some time to process again..
The DetailsView control has in its
Events an
ItemCommand event that uses the
DetailsViewCommandEventArgs event arg class which has a
CommandName property.
My questions are...
What are the possible values (e.g. "Select", "Insert", etc.) for this CommandName property when operating a standard, uncustomized DetailsView control?
Which order do the following fire in?
ItemCommand
ItemCreated
ItemDeleted
ItemDeleting
ItemInserted
ItemInserting
ItemUpdated
ItemUpdating
The "ing" events are currently being intercepted so that if the user doesn't have permission I set the e.Cancel = true and the "ed" events have redirects to send the user back to a list page that shows the items they just added/updated/deleted. However, I am not able to capture the Cancel button on the DetailsView control since there's no event for it. What I want is to redirect the user back to the list page if they click on Cancel as well.
No matter what I do I keep getting the error that my input string is not valid and that the system cannot convert a string to a double. I have a table with two fields, both are defined as nvarchar(25). My command text is:INSERT INTO OtherProducts VALUES ('Sample','Test') am using Visual Web Developer. This is as simple as it gets. I have tried parameters as well.
View 10 RepliesI've got a GridView control with LinkButtons in different cells. Currently when someone clicks a link, it fires the ItemCommand passing the CommandName and the ID of the item the link is bound to. That all works fine. I need to modify it now to not use links anymore. It now needs to show a popup balloon with a link (styled to look like a button) and when the link is clicked, I want it to do the exact same thing. I'm sure there are several ways of doing this, but for time's and consistency's sake, I'm copying the method used from another page we have that is already doing this. It has a hidden DIV on the page with the link in it. When you hover over a link, javascript repositions the div and makes it visible.
So what I need to do is pass my CommandName and item ID to the javascript so that it can trigger the postback when they click that single link. I know this is not the only way to get to the end result, but what I want to do if possible, is still fire the GridView's ItemCommand and set he DataListCommandEventArgs' CommandName and CommandArgument properties. Can someone explain how, under normal circumstances, clicking the LinkButton in the GridView fires the ItemCommand? I know that the LinkButton's click event is forwarded to the GridView but what gets sent from the client side that let's the server know the link was clicked?
I am upgrading a website project from asp.net 3.5 to 4.0. I went through the upgrade wizard and site compiled and built fine. But immediately I have encountetred a problem.I have 3 nested ListViews all using the ItemCommand event. Under 4.0 once the ItemCommand event has fired on the inner ListView it then bubbles up and fires on the parent and finally the grandparent.This is a change in behaviour from 3.5 where only the inner ListView event fires. While I can code round this I am worried about these subtly changes between the two versions.
View 1 RepliesI'm building a navigationmenu and for that I create repeatercontrol dynamicly from codebehind. This works fine with the exception that the ItemCommand event is not firing. The ItemDataBound-event I bind to the repeater-control is working fine. Can somehow tell me what I'm doing from.
Code ASPX
<div id="subnavigation">
<asp:PlaceHolder ID="phControl" runat="server"></asp:PlaceHolder>
</div>
[code]...
I have a User Control that contains a ListView. In the user control's code is this event handler:
protected void listView1_ItemCommand(object source, ListViewCommandEventArgs e)
{
Button_ClickHandler(source, e);
}
What's occurring is that I'm explicitly firing an event so that the parent web page can monitor this and take appropriate actions. Thus when the user clicks on a different ListViewItem it triggers the population of associated data elsewhere on the web page.
This all works fine except for one thing: When I first load the control I'm pre-setting the first ListViewItem. Unfortunately, just setting the ListView's SelectedIndex = 0 doesn't fire the aforementioned event handler.
So I started investigating how to call "listView1_ItemCommand" but couldn't figure out how to instantiate the "e" parameter.
I have a formview and a few buttons outside the formview. How can i access the formview.itemcommand event if the buttons are not in the formview?
View 9 RepliesThe following code successfully displays a record in a FormView and sets the FormView mode to 'Edit' when the user clicks on a LinkButton within a Repeater, however the record is not Updated. If I don't change the .SelectCommand and call .DataBind, I'm able to update the first record that is displayed. Naturally that's a moot point because the idea is to be able to update the record that the user selects in the Repeater.Because of the design of the FormView and Repeater, the record *must* be updated via the FormView. Updating the record via the Repeater is not an option.
[Code]....
