I have declared a Sqldatasource bound to FormView.i wish to get a field value out in the page behind and assign to a variable for further process, while display other bound field values in Formview?z
View 4 Replies
What is the process for allowing paging in a gridview on a page where the user submits information in order to fill the gridview?
The gridview is being fill without a datasource but instead with a datatable.
[Code]....
I am trying to create a page which uses formview to display an existing record
I want to add a gridview to the same page which will display records related to one of the fields in the formview.
In the select criteria for the datasource of the Gridview how do I reference the field from the formview?
for example something like this: Select * from table2 where table2.IDinstance =formview1.editbox1.tostring
I have a datasource (quite heavy to run) and a Gridview on the page.
By default when the page is loaded the datasource and Gridview bind and display. However since the datasource is heavy I want on page load these 2 will not bind.
I want them to bind only on a button click. How to stop the datasource and Gridview from binding on 1st page load ?
[code]....
Is ther a way I can tie DataSource to SqlDataSource on aspx page and pass select parameters?
On my web form, I have a RadioButtonList as follows:
Select a radio button when page loads based on RadioButtonList's DataSource
The problem is that i have a search page. Access Database holding the information. I have a Access Datasource on the page with a Datalist to show the data. I need to find a way on setting it up to says "Sorry no results found" when the is no results. i am unsure on how to do this though.
Below is my datasource and datalist
[Code]....
I want to do is create a simple page which allows a user to post data into a data table. It should not allow them to view, update or delete any data.
Is there a good online tutorial which would guide me through how to do this in Visual web developer 2008?
I have connected a db, and can add "SELECT" controls to view forms, but I need to be able to INSERT to the table.
i want my web page to display data from a table, but instead of the "id" fields displayed, i want to display more meaningful field names. these are stored in other tables. my select statement is as follows:
SELECT [tblRelationship].[individual_id_1], [tblRelationship].[individual_id_2],
[tblRelationship].[relationship_type_id], [tblRelationship].[relationship_id],
[tblRelationship_Type].[relationship_type_id],
[tblRelationship_Type].[relationship_type_description],
[tblIndividual].[first_name], [tblIndividual].[individual_id] FROM
[code]...
I have created a simple dataset with my ObjcetDataSource to my SQL table named Invoices and a new FormView. My form inserts are working 100% correctly, however after some testing i noticed the insert happens again if i hit the refresh button on my browser after an initial insert. I am currently submitting the form back to itself with a success/fail message returned on the page so that the user can keep inserting more records if they choose. This is done in my Inserted behaviour.
In my ObjectDataSource_Inserting code i am setting the values of a date prior to my insert. How do i stop a second INSERT from happening when the user refreshes the browser? I thought it was what IsPostBack was used for? Here is my code:
[Code]....
i have problem white Object datasource. i have a multi-tier Application that include common layer ,DAL Layer,business logic and persantation layerwhen i add a object datasource to my page, it bring me only common layer classes . but i want use bisuiness layer classes what do i do ?
View 1 RepliesScenario:
I am creating a custom gridview control which has a custom CheckBoxTemplateField column (deriving from TemplateField class). This template field column has custom Checkboxheadertemplate (implementing ITemplate) and CheckboxItemTemplate (also implementing ITemplate). In InstantiateIn method of both templates (header as well as Item template), I am adding a checkbox control which has Autopostback = true.
My requirement is:
I want to mark all the values in the binding column of datasource if checkbox in headertemplate is checked. I dont want to mark only rows visible on grid. I WANT TO MARK ALL ROWS IN DATASOURCE. I want to do this in _CheckedChanged event of checkbox in header template.
Problem I am facing: When I check/uncheck the checkbox in header, it postbacks. so in OnCheckedChanged event, gridview's datasource is null. Secondly, in any event of gridview, I could access only those rows of datasource for which corresponding rows are visible in gridview through Gridviewrow.DataItem property. But I want to set it for all rows in datasource.
I have page that has a datasource. The datasource executes a stored procedure and returns results. If the result is NULL, I'd like to forward the user to an error page. How would I accomplish this with ASP.NET and C#?
View 1 RepliesHow can i refresh(Asych) the contents of my Datalist on the parent page from a data change in a page that is displayed in an iFrame on the parent page.
I have movie names with image in the data list that is on parent page.
there another page is openend in the parent pages in an iFrame control.
in that sub page i upload image and other data related to a new movie.
What i want is that when i submit that information in an iFrame page, the DataList should update(Asych) itself on the parent page showing new updated info.
the structure is like;
[code]...
in one on my page i am using to add the data from popup window to grid view without using the backend means databasethis is my popup window code
[Code]....
[Code]....
i have two sqldatasource controls. one i use to display data in textbox's ,filter'd by a select parameter in page behind code. Once checked, i want to copy this data to the other datasource ,by selecting checkbox.Then display this data in detailsview control.
At present the two datasource controls declared , render data to the page simultaneously during pageload. I want to first check data in textbox's from first source, before second datasource is rendered to screen. note, both are filtered by a page variable. i wish to leave the textbox datasource control in situ, as other controls and code depend on it.The other detailsview datasource is my problem?
I have a master page with a textbox that I want to use for a search, and display the results on the content page.
I've dragged in the datasource to the content page, and configured the formview to use that datasource... almost.
The issue I'm having is that on the last step of the configure datasource wizard where you select the parameters, I want to select the master page textbox control for the search parameter... but of course it's not available in the list. The list only allows me to choose controls from the content page.
How do I set this master page search box as the parameter for my datasource?
ASP.net SQL datasource C# code behind
I want the webpage to show a message that there is no data selected,
Instead of showing blank details view
here is a picture of blank details view:
[URL=http://img28.imageshack.us/i/errorks.jpg/][IMG]http://img28.imageshack.us/img28/4328/errorks.jpg[/IMG][/URL]
What C# code do i need to use so that, whenever I enter that page, only an error message will show up
instead of the details view ..etc.
This is the first time I have been working on databases and I am trying to insert data using an object datasource but no data is being inserted and no exception is thrown. I'm not sure where I am going to wrong. I am putting user data into session variables and inserting the session variables into the dataacess class layer and have a try and exception but nothing being thrown. Any help would be really appreciated because I don't know even where to start looking with this or how I can get the error to be thrown. Please see some of my code below to give an idea of what I am doing
Object Access Class
public void InsertCarPolicyHolder(PolicyHolderClass ph, CarInsuranceOptions options)
{
[code]...
I have a page NewUserLogin.aspx wherein I want to store the new password in a sqldatasourcecontrol, the code goes like this
<asp:Content ID="Content1" runat="server" ContentPlaceHolderID="ContentPlaceHolder2">
<div>
<table cellpadding="3" cellspacing="3" style="width: 100%">
[code]...
I am using a ListView and i want to get my datatables sorted by clicking table headers. I am binding my ListView to DataSet via DataSource peoperty of ListView.I donot want to use ObjectDataSource or SQLDataSource Controls.
View 2 RepliesI'm populating a grid view with data from an SQL datasource. The database has a a list of performing artists and lots of details. The gridview initially, shows the ArtisID (Primary key) , and artist name and music style. So far this is all simple and easy. This is done.
Now I want to be able to click on the ArtistId (Select Column) and move the customer to another page where I show indepth details about the artist. How do I do this???
In Vb.net I had a 'Celldoubleclick' event, and I redirect the client. But how do I accomplish the same in asp.net? I already have the primary key value
primekey = datagridview.selecteddatakey.value
i have a detailsview control. in that i have 5 textboxes.
i dont have datasource contrl and any sqlqueries.
when ever i open the page detailsview control statitically should display some values in the textboxes.
then i will insert some values threw businesslogic.
when ever i open the page detailsview display some static values in textboxes.
I am familiar with populating a gridview with data. I am able to bind the Data pulled from the database into the gridview
gridview.DataSource = myDataTable;
gridview.Databound.
If I write the following code, teh gridview will no longer show the data
gridview.DataSource = null;
gridview.Databound.
My question is , I want to make the same thing with a user control that contain a gridview. when I use the user control in an aspx page, I am able to populate it with data, but when I try to make this code, the Datasource does not show, instead, I see .DV. So I tried this code but then , I do not see DataSource property instead I see DV (DataView), when I put .DV = null, I get an error message that the object is not in existed. any idea how to clear the user control gridview from its data.
I have an object datasource which is using Business object as a myconnection
The method i have defined under myconnection is
Publicstatic
DataTable getfn(String dtype,
String did,
String dprefix,
String dname)
{
datable table = new datatable(); then declared stored proceedure and defined parameters and assighned values
In the stored proceedure it has a query like select column1,coloumn2,coloumn3 As Call from table where
I need to take data from Call and display it to the gridview through object datasource .
