Forms Data Controls :: Tie DataSource To SqlDataSource On Aspx Page And Pass Select Parameters?
Nov 10, 2010[code]....
Is ther a way I can tie DataSource to SqlDataSource on aspx page and pass select parameters?
Similar Messages:
Forms Data Controls :: SqlDataSource Pass Parameters
Mar 15, 2011I have big filter coming from database by using storedprocedure. This stored procedure contains about 12 parameters. In asp.net page I select these values and after doing that I want to pass these values to SqlDataSourec which is bound to gridview. How can I pass these values to SqlDataSource, manually in codebehind?
View 8 RepliesDataSource Controls :: Retrieve Data From SqlDataSource And Pass To A Variable?
Aug 20, 2010I have a page in my website where there is very little code-behind. I only have two lines of code in Page_Load() and the rest of the code is declarative ASP.NET code. I have a FormView control which uses a SqlDataSource to get some order information. The SqlDataSource calls a stored procedure called usp_GetOrderDetails, here's the code for the SqlDataSource:
[Code]....
<truncated>
What I want is to grab the screenshotId from the SqlDataSource when the usp_GetOrderDetails stored proc gets called and populate it into a field on the page called screenshotId. I then want to use this screenshotId to get an image from the database based on Id. populating the screenshotId field. How do I do this - do I need to have something like OnDataBound or something like that?
DataSource Controls :: SqlDataSource With A Lot Of Parameters?
Sep 4, 2010I have asked similiar question before where I have two control on the page header says "username" and "gender". User can select both the control or either one and the page will execute searching based on the criteria supplied. So if username supplied
SELECT * FROM [this_table] WHERE username = @username
and if gender supplied
SELECT * FROM [this_table] WHERE gender = @gender
and if both supplied
SELECT * FROM [this_table] WHERE username = @username AND gender = @gender
I know this sounds not very complicated but in my case, I am having like more than 10 controls up there. It is something likeusername, gender, age, date of brith, title, father name, frst name, last name, blur blur blur and it's a lot then I started to lost. if i were to use if else caluse on code-behind and produce query, it would end up writing a lot of if-else and if i use stored procedure (with if-else) then my stored procedure would contains a lot of if-else statement. I am fairly new to this concept and if I'm on the wrong track, please correct me. Is there any better way to save my hair without actually going through each
if-else statement to build the query ?p.s. I'm using GridView and SqlDataSource command to display the result back on .aspx page.
DataSource Controls :: Can Use If Else In Sqldatasource If Else Parameters
Oct 4, 2010I am trying to check whether a username exists in my database before inserting the new row & display a message to the user if it does.
On my SqlDataSource my InsertCommand looks like this:
InsertCommand="IF NOT EXISTS (SELECT * FROM Users WHERE UserName = @UserName) BEGIN INSERT [Users] ([UserName], [FirstName], [LastName], [City], [State], [Country], [CompanyName], [Active], [PasswordHash]) VALUES (@UserName, @FirstName, @LastName, @City,
@State, @Country, @CompanyName, @Active, @PasswordHash) END"
This works as expected: If the username is unique, the row is created.
If the username already exists, the row is not added.
The problem is, if the row already exists, the insert is rejected but the user is not notified.
So my question is, is there a way I can notify the user?
Maybe something like: InsertCommand = "If Not Exists (select....) Begin Insert...Else Notify User Somehow End This is a basic database, I'm not using the built-in membership provider nor will be.
DataSource Controls :: Programmatically Setting ODS Select Method And Select Parameters?
Dec 22, 2010The drop down list is used to determine what search criteria will be used to find an invoice. I tried to set the Select method in the switch statement. I don't understand how to set the Select Method and the select parameters programmatically though . I tried a few different ways but can't make the compiler happy. My ODS is in scope in the code behind. I'm not able to access it's properties though. The BAL resides in a separate project that is a ClassLibrary. I also have a using statement for the ClassLibrary project in the code behind.
give me an example of how to do this?
Mark up:
[Code]....
[Code]....
[Code]....
[Code]....
DataSource Controls :: All Parameters Null In Update Of SQLDataSource?
Sep 23, 2010I have a FormView which is bound to an SQLDataSource. When a user clicks on a save button the form, I need to write any changes made to the FormView back to the table.
I have a Stored Procedure on my MSSQL 2005 database that should be executed when the user clicks on the save button.
It appears the Update is firing, but when I trap the DbCommand object in the SQLDataSource's 'Updating' event, all of the parameters that should be passed to the Stored Procedure are coming through as NULLs. Consequently, the Stored Procedure isn't updating anything.
In the click event of the save button I'm explicitly firing the SQLDataSource's Update method:
[Code]....
The parameters in the SQLDataSource <UpdateParameters></UpdateParameters> section appear to be correct.
Can anyone give me an idea on what to investigate to figure out why it appears the Update is only picking up NULLs?
DataSource Controls :: Sqldatasource Insert Parameters Wont Set
Mar 9, 2010if i do this to set the fetch parameters:
dsList.SelectParameters["client_id"].DefaultValue = Session["client_id"].ToString();
where dsList is my datasource, it works.
but wen i do the samething for the *%^&* insert, it doesnt:
dsList.InsertParameters["client_id"].DefaultValue ="1234";
it keeps saying its null, i dont understand why it woudl be doing this?
DataSource Controls :: SqlDataSource Variable Number Of Parameters
Mar 7, 2011I should perform a Query like this Select * from produtcts where model like @MODEL Now if model is selected from combobox, it should be Select * from produtcts where model like '%MODEL1%' while, if selected chooise is null, it should be like each element in my combobox. how should i do this (in SqlDataSource)
View 5 RepliesDataSource Controls :: Programmatically Adding Parameters To SQLdatasource In Codebehind Using C#
Apr 1, 2011I have a page called Page2.aspx and it is called by another page called Page1.aspx and Page1.aspx passes two parameters namely: Name and Category to Page2.aspx. Does anyone know why the following code from Page2.aspx is not working and it keeps giving an error message as follows: " You have declare the parameter @Username".
string Cat1;
string Name1;
[Code]....
Forms Data Controls :: Cannot Pass The Value From '' To ..aspx.cs Page?
Oct 19, 2010I cannot Pass the value from Display.aspx page to Display.aspx.cs thru '<%#FindAuditorById(Eval("FK_MM_AuditorsSysID") as int?) %>'.The secanrio:
I have a DetailView[dtlviewAuditAssisgnment], with LinqDataSourceId[LinqDataSourceAssisgnment] and Binding the table called tblTT_Assisgnment.
I have a column called FK_MM_AuditorsSysID which contains Id of a value.
[code]...
DataSource Controls :: Passing Parameters In Sqldatasource Storeproc, Dropdownlist And Textbox
Jun 8, 2010I got DDL1: 10 miles
20 miles
TextBox1 : 'AAA20'
Button:
When user selects 10 miles from dropdownlist DDL1 and types AAA20 in textbox1 which is of type text, on button click it has to pull all the columns from database and show results in gridview using sqldatasource store procedure. I'm stuck in server side code..how to pull the data..in store procedure I'm passing two parameters val1 and val2. val1 gets data from DDL1 and val2 gets data when user types in textbox1 and it has to validate the text...see the code below mentioned and tell me how to pass the params and get the data in gridview...
[code]....
DataSource Controls :: Mapping SqlDataSource Parameters To Formview With Multiple DataKeys?
Sep 1, 2010a FormView that is linked to SqlDataSource1a Repeater control (inside the formview) that is linked to SqlDataSource2Thus representing a simple "1 to many" or "parent/child" relationship in the database!qlDataSource1 is simple in that it just retrieves a straight set of records from a table and they are displayed back in the FormView (nothing special happening there).SqlDataSource2 has parameters that filter the contents of the repeater based on the record that is shown in the Formview. This would normally be simple enough to set up by setting the parameter to the formview.selectedvalue property.HOWEVER - THE PROBLEM ARISES...The formview has multiple DataKeyNames because the table that the SqlDataSource1 links to has a compound key. So to filter the Repeater correctlySqlDataSource2 needs to map 3 parameters to 3 data key values in the formview.Any ideas how to do this?I've tried setting the SqlDataSource2 parameters to:
<SelectParameters>
<asp:ControlParameter ControlID="FormView1" Name="Parameter1" PropertyName="DataKey(0)" />
<asp:ControlParameter ControlID="FormView1" Name="Parameter2" PropertyName="DataKey(1)" />
[code]...
Forms Data Controls :: Pass The Value Of The Gridveiw To The ASPX Page?
Apr 1, 2010I am try to create a website like you tube.
i fetch the images in a grid view.
and make a hyper link in it.
Now i want to pass the clicked image value to the ASPX page.
So how can I get the value of gridview clicked image in the ASPX page.
DataSource Controls :: Pass Value To SqlDataSource Control With StoredProc?
Apr 22, 2010i have a website with a gridview, i bind the SqlDataSource Control that i use for my Gridview with a StroredProc. but the storedproc has to get a value which is from a textbox so that the gridview can display a record.
View 3 RepliesForms Data Controls :: Pass A Value To Java Script In Aspx Page?
Jun 3, 2010<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False">
<Columns>
<asp:TemplateField>
<ItemTemplate>
<asp:ImageButton ID="ImageButton1" runat="server" ImageUrl='<%#Eval("Product_Path","~/Images\{0}") %>'
Height="70px" Width="70px" HeaderText="Product Image" OnClientClick="return OpenPopup() ;" />
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
<script type="text/javascript">
function OpenPopup()
{
window.open(' ','mywindow','width=700, height=800');
return false;
}
</script>
I jast wants to access the ImageUrl value inside the Javascript's function OpenPopup() to open a new window to This URL. All Codes are residing in Same Page.
Pass A GUID To A Select Query Of SqlDataSource?
Apr 3, 2011I have an SqlDataSource with following command:
SELECT * FROM [vw_aspnet_MembershipUsers] WHERE ([UserId] = @UserId)
When I pass simple GUID like "3bd08871-d5d6-4f38-8c8a-29fd6077a719" as a UserId, then nothing gets selected. So what is the correct format for passing the GUID value?
DataSource Controls :: How To Select And Delete Record In SqlDataSource
Apr 11, 2010I have a sqlDatasource with a SelectParameter ControlParameter linked to a dropdownlistIs there an a way to select all records like *
[Code]....
So I can select records by year, but is there a value that will select all records for the @Year Parameter so I can display all records?
DataSource Controls :: Optional Select Criteria For An SqlDataSource?
Oct 6, 2010I have a form that searches for images in a database. I have several DropDownLists with various search criteria e.g. Genus, Photographer, State, Project.I'd like the user to be able to filter using any combination of these. For example they might pick a specific photographer and a specific genus but choose not filter by project or state.I'd like to find a good, clean, elegent way to do this.Here is an example of the code I have now, it has only two possible criteria. It works but I have a feeling there are better ways to do this....
[Code]....
Forms Data Controls :: How To Add 2 Parameters To One Field Using SqlDataSource
Sep 2, 2010I am working on a form that I would like to display a dropdownlist or textbox to insert data into the same field.
Currently it is setup where the end user can use one or the other but not both. I am running into a problem getting with the insert parameters for the secondary control. In this case the textbox.
Is it possible to use and Or statment in my Insert Query? I have tried to no avail.
[Code]....
Forms Data Controls :: How To Use Gridview Usercontrol (Ascx) And Sql Pass To Aspx Page
Nov 10, 2010how to use gridview usercontrol (Ascx) and sql pass to aspx page
View 4 RepliesDataSource Controls :: Pass Session Parameters To Sql?
May 2, 2010How I can Pass session parameters to sqlDataSource. I do like this but it is not work:
[Code]....
The session name is :session["EmailAddress"]
Forms Data Controls :: Gridview Pass Specific Column Value OnRowClick (or) ButtonInRow To New .aspx Page?
Feb 24, 2010.NET with VB I have a simple Gridview written with bound columns that gives a summary of all projects assigned to the user viewing the page.
I am struggling with passing the value of my project_ID column of a row that is clicked. I have looked around all day at different things, one involved using TemplateField with and ItemTemplate instead to fill my coloumns in stead of BoundField. This worked nicely to draw my Grid with the correct data from my datasource. I still struggled with two things.1. Selecting the row either button or ondoubleclick like event that runs VB code on my .aspx.vb page 2. Then the code to set a variable to the value for my project_ID columnThis is so frustrating, this was soooo simple in MS Access that was an on doubleclick event. That I simple set up set the project_ID.value = gblproject_ID and then called the new forum with the datasouce of that form filtered on the gblproject_ID. I am starting to think moving my MS Access DB online to .NET is far over my head.
DataSource Controls :: How To Pass Two Parameters In Single Statement
Sep 8, 2010This works great for 1 parameter
SqlDataSource1.SelectParameters("City").DefaultValue = Me.Page.Title
But I can't figure out how to pass in two parameters in a single statement (See the Select Parameters Below) Two paremeters (City, and Classification) If I set the page title to say "Bismark Charters" Bismark = City & Charters = Classification
[Code]...
</SelectParameters >
DataSource Controls :: How To Pass Parameters To Stored Procedure
Apr 30, 2010Ive tried a few ways of doing this without success and got together a simplified example so hopefully I can get an answer. When I try to INSERT using a stored procedure InsertTest (normal SQL works OK) I cannot. I need to know how to pass the @Model parameter to the Stored procedure
Have a Stored procedure which can be executed and after entering string for @Model through wizard a new record is created
My asp:SqlDataSource includes InsertCommand="InsertTest" InsertCommandType="StoredProcedure"
Also my <InsertParameters includes the asp:Parameter Name="Model" Type="String"/>
My drop down (and I think this is where the problem is ). Record is Inserted after choosing Model and pressing enter
Do I have to set one of the properties in the drop down to tell the Stored procedure the parameter being passed is the parameter Model ??
[Code]....