I'm trying set value to text box or etc of edit row. Eg.
If i select link button and new window show and i want to get back selected value to text box of edit row. But my code is work for footerow but does not work at edit row.
[Code]....
I have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
Can someone tell me if there is a technique to make an entire Column within an gridview (for example digits) editable (instaed of a single row) and update this column after changing values by press an Update-button?
A commercial solution is also o.k. with me, but, of course, a method to do it ourselve would be nice.
- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
I have a page with 2 GridViews on it. The top GridView shows all the Bike Riders the bottom GridView shows all the Bike Lockers. I have set up both GridViews to be able to Edit the data. And the top GridView to Select.
When I click the Select buton on the top GridView I programically reset the DataSource for the bottom GridView to show the Locker for the Biker of the top GridView Selected.
So far everything works great. I select a Biker on the Top GridView and the Bottom GridView resets just showing one record for the bike locker.
The problem is that if I then click on the Edit button on the bottom GridView (The Bike Locker GridView) the GridView goes into the Edit Mode but it now shows all the Bike Locker records and the edit record is always the top record of the GrdView.
Here is my code Behind:
[Code]....
How do I change these hyperlinks to say something other then Edit and Cancel?
View 4 RepliesI have a page where I have a tab container and four tabs. the problem is on the first tab "manage quote request" I have a Gridview with the quote request general informatin listed and have a template field created with a link button to databind to the formview quote details. the porblem comes in when after I click on the select linkbutton. the Formview loads right. Then Whe I try to click on the edit linkbuttin in the form view I have to click it twice to change the mode to edit.
here is the page code:
[Code]....
Here is the Codebehind:
[Code]....
im using gridview to read data from datasuorce(my access) and im editing data using 'enable editing' from smart tag(in design window .aspx), now i want to change the edit text: edit(i hav named it as edit) to 'view' for one particular user whose name:'sunil'?
this is my table(in my access layer and calling this data through datasource of gridview):
[code]....
This is my code and i am only able to edit the one data under the category school.But what i nd is to edit the other categories like the name,email...etc..how do i modify my code in the update command.Another thing is to delete the data how do i do that?
[Code]....
I have some template columns that have multiple textboxes in them.
There is one textbox for the Date portion of a datetime field and another textbox for the Time portion of the datetime field.
How do I populate those textboxes after the user clicks on the "Edit" button?
My assumption was I could get the data from the label that was displaying the datetime field data, break it down into Date and Time, and then access the textboxes.text property to fill those.
I can get the data from the label control, but when trying to fill the two textboxes with the data, I get Object Reference Not Set... errors.
Im assuming maybe those textboxes are not setup yet during the RowEditing Event?
[Code]....
I have a problem with my dropdownlist on edit he doesn't want to add any of his parameters to the update. I tried controlparameter and normall parameter both didn't work The folowing I have: Dropdownlist with Datasource: I Have a gridview with templatefields: I have the following asp.net code:
[Code]....
I have the following Business Layer where it connects to:
[Code]....
I have two textboxes,one is for fromdate and another one is for todate. I have one more textbox for the question for the quiz(my application)For example in my database : From date is 12/8/10 and To date is 20/8/10.Now i want to restrict the user to edit the question if the quiz is already started.
Lets say today is 12/8/10. If the user comes tomorrow i.e; 13/8/10, he could not change the from date. I tried to disable the date if the date entered in textbox is < todays date. I dont know whether this one is correct or not.
I 'm trying to use a gv with a modal formview to edit the row details
my first problem is: i can't get the Gv data keys there are actually two but i im trying to go one at a time. the data keys will be 1=rideid & 2=rideleg ... the combination of these two fields make all rows unique.
Secondly: after the row has been edited i need to change the data source so it can be saved in a second table.
these are the errors i'm getting with the code below
Error 65 The best overloaded method match for 'System.Web.UI.WebControls.ParameterCollection.Add(string, string)' has some invalid arguments
Error 66 Argument '2': cannot convert from 'object' to 'string'
[Code]....
I'm quite new to ASP.NET programming, so excuse me if my question is dumb.I have the need of showing a grid (A GridView ?) of boolean values. But instead of showing checkboxes, I want to show the cells filled with black (value is true) or white (value is false). I understand I can do that by crafting a TemplateField and changing the style of the cell to select the correct background color and never displaying an actual value. I have not tried but I think it could work. The grid will contains 99% of boolean values and will contain something like 20 rows of 100 columns (2000 cells).
Now I would like to have that grid edited in place at client side, that is with JavaScript, changing the style of the cell when the user clicks on the cell. There would be a submit button somewhere to postback the whole thing.Is that possible ? Any hint for programming it ?Since I have a lot of webforms which needs to display that kind of grid, I would like to go further and design a custom GridView (or other control) that I could install in the toolbox and reuse easily.
I am using gridview for my application, in the grid i am using dropdown list for two columns ,It's working when i run my application but when i am edit application ddl can't show the editable data ( it show only select).And one more thing that two columns are interrelated , one ddl(Itemgroup) is connected with(ItemName).
View 2 RepliesI have a GridView, and I want to enhance the edit mode, so, I was thinking in modal popup to edit the data when the user clicks the edit button. I used a templated filed with an image to edit data. In the GridView_RowDataBound code, I add an attribute to the image on each row bound...
Dim EditarActividad As ImageButton = e.Row.FindControl("EditarActividad")
EditarActividad.Attributes.Add("onclick", "launchModal")
I have a button TEST the pop-up modal frame, and it works fine:
<asp:Button ID="ModalPopupButton" runat="server" Text="Modal Popup" />
<asp:ModalPopupExtender ID="ModalPopupExtender" runat="server"
TargetControlID ="ModalPopupButton"
PopupControlID ="ModalPanel"
OkControlID ="OkButton"
DropShadow="true"
BackgroundCssClass="modalBackground"
RepositionMode="RepositionOnWindowResizeAndScroll" />
Also, I added the Javascritp "launchModal", on the client side to simulate the ModalPopupButton_Click...
<script type="text/javascript">
var launch = false;
function launchModal() {
launch = true;
}
function pageLoad() {
if (launch) {
var button = $find("ModalPopupButton");
button.click();
}
}
</script>
Why when I click the image on the GridView shows the modal popup frame on its original position (below the grid), and not floating on the center of the screen? (If I click the Button, it works fine).
I want to know how to Edit and Update data from gridview. I have a gridview that generate data from a sqlcommand.Then I want to update the data directly from the gridview, I added the manually the Edit,Update,Cancel manually from the Command Field.How to Edit and Update the data directly from the selected row in the Gridview?
View 2 RepliesI preapare my own grid on listview control. I do not use <%Eval%> method to bind data. I use always databound event
[Code]....
Now you will see the design code
[Code]....
When click the edit button ItemEditing event fires.Now how can I bind the value from database to textbox ?
[Code]....
the code returns null value. I can not acces the textbox control which is in edit mode.
how to edit data in grid view manually without auto generate in gridview + ajax.
View 4 RepliesI have a Gridview that handles double clicks. On a double click, the selected row goes into Edit mode, which means in my case that edit controls (textboxes, checkboxes and dropdown lists) become visible, and display controls (labels) become invisible. On Page_Load the values in edit controls get saved. Now my question is this: how can I get out of the edit mode if I don't want to save? Can I e.g. handle Escape key? BTW, I use C#.
View 3 Repliesi made this: when i try to upgrade some data it says me:
View 6 Replieshow to edit data in grid in eo web control
View 1 RepliesHow can we edit update gridview data in gridview using stored procedure asp.net c#
View 2 RepliesI currently have a label on my page that displays a cookie value (Username after login), I am trying to populate text boxes based on the value of the label, so basically the web page will show the details of the logged in user.
My code is not working at all and I cannot understand why, my cookies work as the Username is clearly displayed in the label after login, and I have tried using another text box to read the value of the label and this works also, so it is definately soemthing to do with my Select statement as to why the values are not appearing where they should.
Each of my text boxes are dynamically populated with code such as below:
<asp:TextBox ID="txtAddress" runat="server" Width="200" TextMode="SingleLine" SRC='<%# DataSet1.FieldValue("Address", Container) %>' Text='<%# DataSet1.FieldValue("Address", Container) %>'></asp:TextBox>
and my dataset code is:
<MM:DataSet
id="DataSet1"
runat="Server"
IsStoredProcedure="false"
ConnectionString='<%#
[Code]....
So I know that the error is that it is not able to read a value for Contacts.CompanyName, but I cannot figure out why.
I want is after login, for the user to be able to go to a 'my account' page to see what data is held on them and edit it if necessary.
Now for the horrid bits, I am building this in dreamweaver as aspx pages in vb and it is backed with an access database.
I'm using a listview control to do a survey stuff. Everything is working perfect to present the data questions, to be answered text with the different type of controls radiobuttonlists, checkboxlists, dropdownlists, etc. The admin can modify, create, change questions, answers, etc. on the survey.When it's select, edit, or insert it's easy to find the control inside a listview.However, I'm wondering how to post user's answers back to DB. How to find controls inside the listview to grab the entered data/responses from there using let's say the submit button that is outside of the listview.I believe there should be a way to do it as otherwise why we put radiobuttonlist on a listview that somebody could click it and then we should be able to get that entries. Or I'm too optimistic on this control?
View 2 Replies
