Forms Data Controls :: ListView Not Switching Into The Edit Mode
May 4, 2010
I need to display data somewhat like this:
Student Name: John
Exam Grade
MidTerm1 A
MidTerm2 B
For this, I defined a class 'Student' that has the properties StudentName[String] and Exams [a list of ExamGrade objects which has the Exam and Grade properties]. And I am using nested listviews to display the data. Here is the markup for the ListViews:
[Code]....
And the StudentInfo class looks like this:
[Code]....
And Exam class has just two properties.
Now the issue is that I have to press the Edit button [link button] twicw to get the EditItemTemplate. Even then I would get the blank textboxes. So what should I do to make the EditItemTemplate appear on the first click and the TextBoxes to appear with the existing data?
View 3 Replies
Similar Messages:
Apr 29, 2010
I have a basic list view, in the edit mode I have a dropdown list, and a checkbox, I want it so that if you choose "yes" from the drop down box the check boxs becomes enabled. I know I need to find the control but I keep getting object refrence error with this code.
[Code]....
the listview renders its layout / item template fine but when I click on edit to send it to edit mode it fails to find the dropdownlist ddlQA1YNM which is a bit ironic cause its the ddlQA1YNM that is making the call to ddlQA1YNM_ondatabound. Now it could be with the fact its on the databound stage. Not sure how that plays into the stack. I call ondatabound to determine what the dropdownlist value is and set the enabled status according on the load into edit mode.
View 6 Replies
Dec 5, 2010
I have a problem with using the listview.When I want to update or cancel the update, the listview doesn't leave the edit mode.When I clicked the updatebutton, the methode Listview.Itemupdating is fire and changes the database. But then nothing happened. Even if i set the itemindex -1.The Listview.Itemupdated does also not fire.This is the code.
[Code]....
The code:
[Code]....
View 7 Replies
Jan 31, 2011
I've a listview with object datasource as source control.
I'm using listview events for update and delete.
on update event i.e in itemcommand==update , I'm rising a javascript event on validation.
So when this validation raises I want the listview to be edit mode on the same row.
For this under Listview updating event I used the following:
[Code]....
but I'm facing the below error:
Updating is not supported by ObjectDataSource 'odsCategory' unless the UpdateMethod is specified.
View 2 Replies
Feb 12, 2011
I have a listview which i want to open in Edit Mode by default.. How to do ?? i m trying to delete by giving checkbox too.In DetailsView we have Default mode property but not in listview. Code i am using is:
[Code]....
if possible guide me how to delete in bulk with checkbox in listview.
View 5 Replies
Feb 8, 2010
I'd like to be able to display multiple records in edit mode in a listview. Is this possible?
View 3 Replies
Apr 20, 2010
I have a "report" the users can run it basically creates a simple gridview. In the gridview the user can click on a claim ID. The claim id is then passed via url querystring to a claim management page. The claim management page uses a listview to display the various claims and allow users to edit them. I want to use the claim id passed in the url to locate the listview row to open in edit mode, so the user can make changes / alterations to the claim.
View 4 Replies
Jan 28, 2010
I preapare my own grid on listview control. I do not use <%Eval%> method to bind data. I use always databound event
[Code]....
Now you will see the design code
[Code]....
When click the edit button ItemEditing event fires.Now how can I bind the value from database to textbox ?
[Code]....
the code returns null value. I can not acces the textbox control which is in edit mode.
View 13 Replies
Mar 30, 2010
I have a grid view with edit and save buttons when I click on edit it is letting me edit it and if I click on save it is lettingme save the data that I have edited.
The thing is after save is done it is showing the data in edit mode i.e <edit item template > mode I am still seeing the textboxes if I refresh the page then I am seeing it normally.
How can I stop the gridview to show edit mode after the save is done?
View 4 Replies
Dec 4, 2010
- I want to put multiple rows of a gridview into edit mode
- I have not found any easy method to accomplish this task. I found a way to programmatically put a gridview into edit mode, but in testing the code below it works for only 1 row at a time :
[Code]....
View 5 Replies
Aug 18, 2010
How do I change these hyperlinks to say something other then Edit and Cancel?
View 4 Replies
Mar 1, 2010
I have a page where I have a tab container and four tabs. the problem is on the first tab "manage quote request" I have a Gridview with the quote request general informatin listed and have a template field created with a link button to databind to the formview quote details. the porblem comes in when after I click on the select linkbutton. the Formview loads right. Then Whe I try to click on the edit linkbuttin in the form view I have to click it twice to change the mode to edit.
here is the page code:
[Code]....
Here is the Codebehind:
[Code]....
View 1 Replies
Apr 4, 2010
I have a Gridview that handles double clicks. On a double click, the selected row goes into Edit mode, which means in my case that edit controls (textboxes, checkboxes and dropdown lists) become visible, and display controls (labels) become invisible. On Page_Load the values in edit controls get saved. Now my question is this: how can I get out of the edit mode if I don't want to save? Can I e.g. handle Escape key? BTW, I use C#.
View 3 Replies
Feb 26, 2010
This is what i have using VS and VB: formview that is bound to a sqldatasource. In the formview i set up three panels and the visibilty is controlled by three buttons. I want to be able to click the edit link button and have the panel that is visible in readonly mode be the one visible in editmode
View 6 Replies
Oct 10, 2010
Even though I searched for a similar posting (and couldn't find it), I am certain that someone must have raised this question in the past.
I am relatively new to the .net world and I am using VS2010/SQL Server 2008. I can't seem to find the problem, but when I click on the "edit" button I get a postback but I get the ItemTemplate again.
[Code]....
View 3 Replies
Jul 19, 2010
How can I set a particular row into edit mode in code? Like when the Grid loads up I need the last row to be in Edit mode.
View 3 Replies
Oct 21, 2010
I have a gridview and a template column:
<asp:TemplateField HeaderText="Active">
<EditItemTemplate>
<asp:CheckBox ID="chkbxActive" runat="server" Checked ='<%# Bind("Active") %>' />
</EditItemTemplate>
<ItemTemplate>
<asp:Label ID="lblActive" runat="server" Text='<%# Bind("Active") %>'></asp:Label>
</ItemTemplate>
</asp:TemplateField>
The item "Active" is a bit from the database And for the RowDataBound:
Const HeavyCheckMark As Char = ChrW(&H2714)
For Each row As GridViewRow In gvProductCodes.Rows
If gvProductCodes.EditIndex = -1 Then
' Selects the text from the Label which is inside the GridView control
Dim lblActive As String = CType(row.FindControl("lblActive"), Label).Text
lblActive = lblActive.Replace("True", HeavyCheckMark)
lblActive = lblActive.Replace("False", "")
'Replaces the text in each Label control
CType(row.FindControl("lblActive"), Label).Text = lblActive
Else
Dim chkbx As CheckBox = CType(row.FindControl("chkbxActive"), CheckBox)
End If
The check mark works fine when not in edit mode. But when in edit mode, the row that is being edited works as expected. But the other rows now show True or False. I want them to have the const HeavyCheckMark in it instead.
View 3 Replies
Jan 28, 2010
I created a sample gridview. However, when I clicked edit mode in one of selected row, it will run away. I need to use the mouse scroll up and down to find that row. As well, once finished the edit (clicked update button), it will run away again. I also need to find the editted row by using the mouse. How do I fix the position?
Furthermore, I also want to fix the header. If I scroll down, the header row will be on the top where ever I scroll to.
View 4 Replies
Mar 10, 2010
I've got a DatalList control on a page that I intend on using for Editing Items. I've added a button control into the Item Template with CommandName="Edit", and when click the button on the item, the page Posts Back and continues to display the ItemTemplate for that item.
Here's what I've got...
[Code]....
View 4 Replies
Apr 10, 2010
Edit mode does not run all the times I have a gridview with custom edit (I have my own textboxes placed in the EditItemTemplate for updating). When the user clicks the Edit button, the gridview goes into edit mode with no problem. In RowDataBound handler, I have the following code which checks if the edit mode is in process then an additional function will be called.
[Code]....
The problem is, I noticed that RowState and function are NOT called every time the GridView goes into edit mode but it goes every other line!!! For simplicity, I have blocked the function and put direct code. I have also tried the Edit functionality provided by the GridView, and surprisingly, it is NOT working!! Notice that in both ways, the gridview is displayed in Edit mode and it does display the
Update Cancel buttons in my second try. It is working fine in all alternate rows! I hope it is clear.
View 5 Replies
Aug 16, 2010
My gridview was working just fine until I converted the Officer Report collum to a templatefield so I could have a multiline text box. Now when I go into edit mode and press update, it doesn't update. I don't know what I am missing here?
[Code]....
Here is the datasource information.
[Code]....
View 5 Replies
Jun 9, 2010
I have a dynamically built gridview in which every row in editing mode has 2 dropDownLists, i set autoPostBack property of first list to true in order to change the other list values according to the first, but upon postBack, the gridview is not in edit mode any more.
View 7 Replies
Apr 28, 2010
I have GV with custom edit box. In the GV, I have a button to select the record for editing and another button to navigate to another screen. I was able to disable the button that navigates to the other screen in both normal and edit mode.
Now, I would like to disable all other buttons that remains visible for the other records list to prevent the user from editing other records while in edit mode.
I think my problem is because I am trying to disable a button that is not visible?
View 11 Replies
Mar 6, 2011
how i add DropDownList in edit mode of DataGridView by DataSet through code not visible?
As we know that by default Every Column in Edit mode is a TextBox I want to replace this to DropDownList through code.
View 3 Replies
Oct 21, 2010
I'm trying execute code only when FormView is in Edit mode ---but the code following line this is being executed even in read-only mode.
If formname.CurrentMode
= FormViewMode.Edit
Then
View 5 Replies
