Forms Data Controls :: Unable To Set Text Of Label After Rebinding SQLDataSource
Jan 30, 2011
I have a text box in a FormView that I use to display the return value from the stored procedure that I'm using to maintain the data. For assorted reasons, I'm not able to use the built in ability of the FormView to manipulate the data.
I have the following code at the end of the procedure that calls the stored procedure. It is a snippet that omits the bulk of the procedure.
[Code]....
As is, the label text is updated with the message. However, when I uncomment out the code that manipulates the SQL Data Source and rebinds the FormView, the label text is NOT updated. I can't figure out why it craps out.
1) AdvisoryMessageText is declared at the class level for the code behind, so it should be retaining the value across all of the procedures as their caloled.
2) TextBoxAdvisoryMessage is contained within the FormView EditTemplate.
View 1 Replies
Similar Messages:
Mar 15, 2010
I have Template fields configured for Gridview. The gridview is using an objectdatabsource to bind itself. I have the gridview configured to use Templatefields which then contain tables to display the information. This works fine.
My question is, is it possible to change the text of the label if certain criteria is reached. If "NumberOfDwellings" is 1 then change the label to read, "1 Dwelling". Where-as if NumberOfDwellings has more than one then it's "3 Dwellings".
<asp:Label ID="lbl_NumberOfDwellings" runat="server" Text='<%# Eval("NumberOfDwellings") & " Dwelling(s)" %> '></asp:Label>
View 1 Replies
Jun 18, 2010
i am facing a minor problem but can't find out its syntaxi have listview, and inside the template i have 2 labels, in design time i bind 1 label to one column thatis 'type' and depending upon this type i want to bind other labels to different columnsif type is question than 2 label will have to show data of question columnif type is job than 2 label will have to show data of job, so on........how to accomplish this,in databinding event handler i can check the value of typebut i want to know the syntax of binding 2 label in run time, with different fields using EVAL
View 3 Replies
Jan 12, 2010
I am using the following code for slide show of AjaxToolkit. It works. But I wanna get the label1.text as picture name But I cannot do it in public shared function ! How can I do that !
[Code]....
View 6 Replies
Mar 18, 2010
I am able to dynamily bind my grid to the cube based off the facillity I have selected. Now, if a facility has multiple cubes, I want the users to switch between the two cubes dynamicly, so I have created a drop down list showing their cubes and the ones that they can select. Currently I'm been trying several things in order to "rebind" the data but they don't seem to be working, so I figured I would attach my code to see if anyone Had a good idea.
If I make the cube change then switch back over to change facility and then back to the page, the new cube will load. So I have to find a way to do it in the one step rather then have them navigate to another page and then back again. Perhaps auto navigate them to a page and have that page send them back etc... Anyway here is the code: I first bind the data via the page_prerender call
[Code]....
Then the code drops down into the LoadCube(FacilityID) sub routine
[Code]....
Then here is the setup for the subroutine that will call the page load/ should change the cube to the correct cube.
[Code]....
View 1 Replies
Mar 15, 2010
I have a GridView and Formview attached to the same ObjectDataSource.
Everything is working ok so far.
If I enter new search criteria and click "Search", both the GridView and FormView rebind properly to the ObjectDataSource results. And I am able to page through the FormView records and they match the GridView records above.
When I click a sort link in the GridView, the ObjectDataSource returns the correct results based on the header link's commandName of 'Sort' and the CommandArg of 'SortExpression'.
The only thing wrong now is on the sort, the formview records do not reflect the reversing of the sorted record order. If I page through the FormView the records remain in the same order.
Why does the FormView not recognize the ObjectDataSource's changed results on the sort post back (even if it is only the sortExpression parameter of my ODS select method).
How do I get the FormView to rebind to the new ODS result set? I have called formview.DataBind() from every event I can think of. That does not seem to work either.
View 6 Replies
Dec 30, 2010
I am having trouble formating label.text to currency in below statement:
Label5.Text = Convert.ToString(tsum * (3) * (.9m));
Label5.Text = Convert.ToString.Format("{0:c}", (tsum * (3) * (.9m)) );
error says ToString is a method not valid in given context.
View 5 Replies
Jul 25, 2014
I'm having problems getting my label to update, it is a asp:label known as LabelFMI - what I am doing is when the user changes the value of certain things update it by either taking away or adding the difference. I've managed to get this to work by having to refresh the page and moving it to out of the function I made for it and into default.aspx's Page_load sub.. However I was hoping to not have to refresh to have it update? is there anyway to achieve this?
Code:
Private Sub UpdateLabels(ByVal start As Date, ByVal [end] As Date, ByVal value As Double)
'Import the data for the table
Dim da As New SqlDataAdapter("SELECT * FROM [event] WHERE NOT (([eventend] <= @start) OR ([eventstart] >= @end))", ConfigurationManager.ConnectionStrings("daypilot").ConnectionString)
da.SelectCommand.Parameters.AddWithValue("start", start)
[code]...
View 5 Replies
Aug 26, 2010
I am working with a formview edititemtemplate. Currently in my page load, i have some stuff that would show or hide certain panels based on dropdownlist values. These dropdown values get binded during page load. I need to be able to change the values/dropdowns, without rebinding the old data, and updating the visibility of the panels based on predefined rules.
I have experimented with putting my formview.databind() in page load if isnotpostback, in prerender, in prerender if isnotpostback. I have tried my rules (ex if ddlState.selectedvalue = "DE" then pnlDelaware.visible = "true") in the page load, and the page render. I'm just not sure how to get the stars aligned here. The closest i have come is having the databind in the pageload if notispostback, and the rules in the prerender. However I get an error "dropdownlist has a SelectedValue which is invalid because it does not exist in the list of items.
View 4 Replies
Sep 27, 2010
I have ajax accordion with 6 panes with an user control inside each of it. In the first pane I have a form view user control and have a modalpopup to display error message. The same method is used in all other panes.
On page load I was able to set the label text property and it properly shows in modal popup.
However whenever I do some validation and update label text property, the modal popup shows up but the label text property is not updated. It works in all other panes.
The only difference is the user control in the pane is inside of a update panel. If I remove the update panel every thing works fine. But I need the update panel to avoid full post back.
How do I set the label text property inside of a modal popup.
Sections of code below:
[Code]....
View 1 Replies
May 7, 2015
I am unable to get it done as i have huge data in my table which is spoiling the standard look and feel of grid view..
if (row.RowType == DataControlRowType.DataRow) {
ViewState["description"] = e.Row.Cells[10].Text;
if (e.Row.Cells[10].Text.Length >= 25){
e.Row.Cells[10].Text = e.Row.Cells[10].Text.Substring(0, 30) + "...";
e.Row.Cells[10].ToolTip = ViewState["description"].ToString();} }
View 1 Replies
Apr 16, 2010
I'm trying to get the text value of a label when that row is selected in my gridview. The label's text is databound. Originally when I used the <ASP:BoundField /> I retrieved the data by using this syntax "Server.HtmlDecode(row.Cells[1].Text )" when an "onrowcommand" event is triggered. My question is what is the syntax to retrieve the text value of this label if I am using a template field in my gridview. The code for my label is below.
[Code]....
View 5 Replies
Nov 15, 2010
i have a table in my sql, and i want it to loop thoruh each row and display some text in a label, (or anything for that matter)
how id go about this, if your going to suggest ajax can you be very descriptive as ive not done much AJAX if am honest!
View 3 Replies
Jul 9, 2010
I have a repeater set up which takes all records from a SQL DB table and displays. One of the items in this repeater is a Label. The Label's job is to display the 'Responded' field of the database, which is a 'bit' Datatype.
However, when the label displays naturally, it will show TRUE or FALSE. As this is not appropriate for the end-user they would prefer If True = Completed and if False = Outstanding.
I have written the script to do this in an ItemDataBound field, so that (hope my understanding of itemdatabound is correct), everytime a record is found it checks to see what the value is in responded field and 'if true then do X else do Y'.
However, when I have ran it through debug mode it shows that the Label Text of the label is just "". Therefore it will always show 'Outstanding'. In addition, the AssociatedControlID is also blank (""), although I am unsure whether this would present a problem or not.
C#:
[Code]....
ASPX:
[Code]....
If any extra information is required I'll do my best to provide it.
View 8 Replies
Aug 18, 2010
I want to wrap label text in gridview,as it increses as of the data which bind from database. i have used below code
<asp:TemplateField HeaderText="Name" ItemStyle-Width="100px" >
<ItemTemplate>
<asp:Label ID="lblName" runat="server" Text='<%#Eval("Name").ToString()%>' width="100px" ></asp:Label>
</ItemTemplate>
<ItemStyle Wrap="true" />
</asp:TemplateField>
But it not wotking.
View 3 Replies
Mar 10, 2011
I have a Label1 (Which displays the userName on a page fetched from the c sharp). Now how do I display this Label1 on a text box(UserId), that's already binded, on the same page?
<EditItemTemplate>
<asp:textbox
id="UserId"
runat="server"
Text="<%#
Bind('UserId') %>"
/>
</EditItemTemplate>
I just wanted the current userName information included during the insert.
View 13 Replies
Jan 6, 2010
I am having problem with getting the label.text inside the datalist. I tried the below one and it didn't work.;
[Code]....
View 16 Replies
May 4, 2010
How can I concatenate two data into the text part of label? I've tried the following:
<asp:Label id="phist" Text='<%# Bind("AA") %>' & '<%# Bind("BB") %>' runat="server"/>
and the following:
<asp:Label id="phist" Text='<%# Bind("AA") & Bind("BB") %>' runat="server"/>
The first one gave me error, second one seems to take the second data from "BB" only.
View 5 Replies
Oct 21, 2010
I have a datalist in a page which shows a username in a label from the database (theiruseridLabel)I'm trying to take this username, find its profile.firstname and profile.company name, and then display them as the text in 2 hyperlinks.
i have the code below, but this doesnt work..? can anyone see why? there is no error, just the hyperlinks just show as 'hyperlink' rather than the names i want.
HyperLink hp2 = DataList1.Items[0].FindControl("HyperLink2") as HyperLink;
HyperLink hp3 = DataList1.Items[0].FindControl("HyperLink3") as HyperLink; [code]....
View 4 Replies
Sep 5, 2010
How to accomplish the below:Whenever users selects a row in the gridview, "text" of a asp.net label control changes from 'A' to 'B'. Both label and gridview are on the same aspx page.
View 7 Replies
Jun 29, 2010
I have a gridview with the following Template Field
<asp:TemplateField HeaderText="ADDRESS" SortExpression="CAST#">
View 14 Replies
Jan 24, 2010
i have a label that get repeated in a repeater control.what i want is that it retrieves a data from database in the vb code behind,.
i have tried this on the aspx page:
[Code]....
View 10 Replies
Jan 20, 2011
I am trying to programmatically set some lables inside a DetailsView that is populated by an ObjectDataSource. The detailsview is handled in an unusual way with one TemplateField that has one ItemTemplate that has one table that has two rows of significance and a boatload of bound items. I'll be working on the EditTemplate next. But now I need to set the top row lable values programmatically baised on the type of data that comes-up. I have scoured the Internet looking for ideas and found two possible approaches - neither worked. I get the error about something not being set to an instance of the object - or something like that.
Here is the ObjectDataSource:
[Code]....
Here is the DetailsView:
[Code]....
My first approach was to set the OnSelected property to the following code in the code behind, which executes:
[Code]....
My second approach was to delete that OnSelected property and try the following code in the code behind:
[Code]....
View 5 Replies
Oct 2, 2010
I'm building a list view that contains a list of message such as FaceBook...I need to keep a textbox to have the text to insert, a label and a imageI tryed:
[Code]....
View 6 Replies
Nov 30, 2010
I have a DetailsView for inserting values and currently the columns are center aligned. What I want is to have my "label" right aligned and my "text box/dropdown box" left aligned.
Something like:
Name: _______________
Address: __________________________
Phone: __________
Insert Cancel
If I change the alignment to left for both, the Insert and Cancel buttons on the bottom of the control also shift to the left, and I'd like them to stay centered.
View 2 Replies
