I'm trying to use a required field validator on a fckeditor inside a formview edit template, but it's not working and I can't seem to get any google searched methods on this to work.
View 4 Repliescan i add html page/template into tinymce or fckeditor or WYSIWYG editor
View 4 RepliesHow do I access a specific control within a FormView's "<InsertItemTemplate>"?
View 2 RepliesI am trying to change the textboxes in the FormView insert template to dropdownlists but they keep setting the parameters to null. Here's what I have:
[Code]....
In Page_Load
CType(frmSurvey.FindControl("ddlYearOfQualification"), DropDownList).Items.Add(New ListItem("2010", "2010"))
CType(frmSurvey.FindControl("ddlYearOfQualification"), DropDownList).Items.Add(New ListItem("2009", "2009"))
and in the SqlDataSource
InsertCommand="INSERT INTO [tblSurvey] (... [YearOfQualification] ...) VALUES ( ... @YearOfQualification ... )
And in insert parameters:
<asp:Parameter Name="YearOfQualification" Type="Int16" />
And the insert fails with YearOfQualification as null. If I sue the standard textbox:
<asp:TextBox ID="YearOfQualificationTextBox" runat="server"
Text='<%# Bind("YearOfQualification") %>' />
I keep getting a null reference when I try to access a listbox inside the EditItemTemplate of a formview. I check the mode before accessing the control (Formview1.CurrentMode) to make sure it is in edit mode and even set it manually to edit mode again! But formview1.findcontrol("blah") returns null. Formview1.EditItemTemplate does not have a FindControl method, not sure what else to try.
View 1 RepliesI have a formview with various templates set up for a database that has 255 columns. I need the insertitemtemplate to pre-fill values based upon a specific selection by the user (just like the edit item template) but when the template is switched to insertitemtemplate every text box is cleared. The idea is that a new entry is usually made by making minor changes to an existing entry. With 255 fields I don't want to require the user to enter every field when only three or four need to change.
View 8 RepliesThis is my mistake: If I put an AJAX Editor INSIDE a FormView it loses the layout (I see all the icons button disordered and the Editor without background). If I simultaneously put an Editor inside a FormView and externally in the page both works fine and I see both in the right way. I repeat: with another Editor in the page the Editor inside the FormView works fine!!
I think it may depend on the css, so I have tried to modify the "DesignPanelCssPath" and the "DocumentCssPath" of the Editor inside the FormView, but nothing has changed.
i am using c# and want to do a validate to edit and do a new fild.
View 7 RepliesI have the following (abbreviated) code:
<asp:FormView ID="FormView1" runat="server" DataKeyNames="ItemID" DataSourceID="LinqDataSource1">
<EditItemTemplate>
<asp:DropDownList ID="ddlCategory" runat="server" SelectedValue='<%# Eval("Category") %>'
DataSource="<%# GetCategories() %>" DataTextField="Text" DataValueField="Value" />
</EditItemTemplate>
<ItemTemplate>
<asp:ListView ID="lvParticipants" runat="server" DataSource='<%# Eval("Participants") %>' >
<InsertItemTemplate>
<asp:DropDownList ID="ddlCountry" runat="server" SelectedValue='<%# Eval("Country") %>'
DataSource="<%# GetCountries() %>" DataTextField="Text" DataValueField="Value" />
</InsertItemTemplate>
</asp:ListView>
<ItemTemplate>
</asp:FormView>
When the FormView is in Edit mode, ddlCategory is populated as expected by calling GetCategories(), which returns a List of categories. However, when the ListView is in Insert mode, ddlCountry is empty. I put a break point in GetCountries(), but it never gets called. If I change the name of the method, I get an error. So it recognizes the method at compile time, but does not call it at run time. I'm guessing this is an embedded binding issue of some kind, but I'm hoping someone can save me a lot of time by pointing out the solution.
VS2008 c#, asp.net 3.5, ms sql 2008How do I validate user input in TextBox inside a FormView [Insert Mode] with MS SQL 2008 Database?* FormView #fvInsertProjectInfo* TextBox #txtProjectNameCurrently, user could insert a new project using the FormView, but will only be found out that the project is already existed when pressing the INSERT button. To make it more user friendly, I would like to check that the database does not contain a record of the project the user trying to insert (by comparing value in txtProjectName with the Projects table in the database)
View 2 RepliesI am trying to validate data using the OnItemUpdating event on a FormView control. The event is fired when I click the update button but
e.OldValues["txtDate2"].ToString() in the function returns a null value. What am I doing wrong here ?
ValidateForm(Object sender, FormViewUpdateEventArgs e)
{
string val = e.OldValues["txtDate2"].ToString();
}
In my "insert tempate", I formatted fields, moved them around so everything looked and acted as needed. My Question) Anyway of taking that work (including the field formatting) and copy to the "edit template" ?
VS 2010 - Language: VB
I have a simple EditItem Template within a Formview that I am using to add a record to a table. There is one field in the form that I would like to assign a variable to. I cannot figure it out. I do not see any properties in VS2008 that allow me to assign the value.
The value that I am assigning is an item number, wich is the primary key in the table that I supply on the form.
I am trying to add a validation of the textbox.text.length in a FormView and prevent the insertion of being made in case the text length is not compliant (less than four characters).
In the scenario when clicking the submit button an Alert should appear with xxxx warinig text. and the Insert command being prevented.
This is my FormView Insert Template:
[Code]....
In my listview object insert/edit template, I have two dropdownlists (category, subcategory). When a user selects a category (autopostback), I would like the subcategory dropdown to filter to only the those that match the categoryID from the category ddl. This seems to be complicated by the fact that it is in a listview object. I'm currently using a queryextender on the subcategory datasource, but I'm not sure how to apply the selectedvalue of the category to the queryextender. The subcategory just shows all items and is not filtered. How do you accomplish this?
View 1 Repliesi am try to access control Label in header template of forview i have tried following code but it doesnot worked.
Label l =(Label) frmuserDetail.HeaderRow.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
Label l=(Label)frmuserDetail.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
I'm putting together a page that allows the user to enter a new record in an SQL table. A bunch of the fields in the table are bit datatypes. I want to use CheckBoxes to correspond to the bit datatype columns in the SQL table.
How do I bind the checkboxes to the SQL table columns?
Here's what I have, not sure if this is right:
[Code]....
I am using a formview to show data, with edit, insert and delete enabled. My problem is with the insert.When i click the insert, the formview changes fine to the template for inserting new data, the problem is it was allowing the user to insert the ID themselves, I have made this readonly, but how would i go about ensuring the ID key is made the next number in line? and that it is printed to this textbox?
View 1 RepliesI wish to remove the edit button in the formview item template if a particular user is not authorized, how do you accomplish the removal?
View 6 RepliesI have a Formview residing inside am Item Template of a Gridview. The formview is not populating, and I am pretty convinced that I am not passing the parameter properly from the Gridview to the Formview. I have listed the relevant code only, so that you can scan though it easierGridview tag:
[Code]....
Gridview's Datasource:
[Code]....
Formview's tag inside Gridview template field:
[Code]....
Formview's datasource:
[Code]....
I have a formview with both edititem template and item template as following:
<asp:FormView ID="PFTFormView" runat="server"
DataKeyNames="PFTId"
EnableModelValidation="True" Width="90%"
OnItemUpdating="PFTFormView_ItemUpdating"
onmodechanging="PFTFormView_ModeChanging" >
<EditItemTemplate>
<table>
<tr><td class="style1">PFTId</td><td class="style3"><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td class="style1">Last Name</td><td><asp:TextBox ID="txtPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' Width="200px" /></td></tr>
<tr><td class="style1">First Name</td><td><asp:TextBox ID="txtPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' Width="200px" /></td></tr>
<tr><td class="style1">Home</td><td><asp:TextBox ID="txtPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' Width="200px" /></td></tr>
</table><br />
<asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True"
CommandName="Update" Text="Update" />
<asp:LinkButton ID="UpdateCancelButton" runat="server"
CausesValidation="False" CommandName="Cancel" Text="Cancel" />
</EditItemTemplate>
<ItemTemplate>
<table>
<tr><td>PFTId</td><td><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td>Last Name</td><td> <asp:Label ID="lblPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' /></td></tr>
<tr><td>First Name</td><td><asp:Label ID="lblPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' /></td></tr>
<tr><td>Home</td><td> <asp:Label ID="lblPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' /></td></tr>
</table><br />
<asp:LinkButton ID="EditButton" runat="server" CausesValidation="False"
CommandName="Edit" Text="Edit" />
</ItemTemplate>
</asp:FormView>
on my code behind, I have:
Sub PFTFormView_ItemUpdating(ByVal sender As Object, ByVal e As FormViewUpdateEventArgs)
Dim PFTObj As New PFT
Dim PFTDST As New Data.DataSet
Dim newPFTLastName As String = DirectCast(PFTFormView.FindControl("txtPFTLastName"), TextBox).Text
Dim newPFTFirstName As String = DirectCast(PFTFormView.FindControl("txtPFTFirstName"), TextBox).Text
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
If PFTObj.UpdatePFT(Session("PFTId")) Then
Me.lblErrorMessage.Text = "PFT Update Successfully"
Else
'
Me.lblErrorMessage.Text = "PFT Update UnSuccessfully"
End If
PFTDST = Nothing
PFTObj = Nothing
end sub
The problem is:
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
are not returning the updated value from the form.
I wish to add a sub to vb file that changes the display value of several asp:panels located in a Formview Item Template. My only question is what is the proper event to run this in. (databound, item created etc...) If it matters this formview appears in a Gridview Item Template.
View 7 RepliesIn the website I'm building, I have a form that allows new users to register. Part of this page has mandatory address fields, and I use a postcode lookup field which returns a SuburbID and FullSuburbName (Suburb, State & PostCode) to a RadioButtonList inside an UpdatePanel.
[Code]....
I then handle the insert process in codebehind, and all this works perfectly on my New Account page.What I'm trying to do now, however, is replicate this functionality in the Edit Template of a FormView on my Manage Account page. The idea being that the user can view their current details in the ReadOnly view, then switch to Edit view to change their address (amongst other details of course). When the FormView changes to Edit mode, it should display the user's current PostCode in the textbox, and the RadioButtonList should display the available Suburbs for that PostCode, with the user's current SuburbID as the initial SelectedValue. If the user changes the PostCode and hits search, this refreshes the RadioButtonList with the new list of Suburbs, and once they have selected a new SuburbID this should get written back to the DB with the rest of the form (when they click Save I mean), using the SQL Data Source Update element. However, I simply cannot get this to work inside the FormView Edit Template and
So far, I have tried to handle the FormView's ItemCreated event and populate the RadioButtonList with the Suburbs that match the user's current PostCode, but if I do this with SelectedValue='<%# Bind("SuburbID") %>' in the RadioButtonList, I get the error "Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control."If I then change it to have the SelectedValue populate from the codebehind, this works on the initial switch to Edit mode, but when the user changes the PostCode and hits search, I get a different error "'rblSuburb' has a SelectedValue which is invalid because it does not exist in the list of items."My thinking was that rather than binding the RadioButtonList I would just add the new SelectedValue in the SQLDataSource_Updating method, but it doesn't seem to like that either.
have a gridview inside a formview is it possible to show running totals in the gridviews footer section? the gridview is populated with two parameters outside of the formview. Im using .vb
View 2 Repliesi'am trying to validate a DateTimePicker inside a gridview ( it's actually an ItemEditTemplate) i'am trying to use a compareValidator Because i have two columns startDate and endDate this sounds to be easy but the validator cannot find the item startDate because it's in another column is there a way to do it whithout having it done on the client side using javascript .
View 3 Replies