I'm putting together a page that allows the user to enter a new record in an SQL table. A bunch of the fields in the table are bit datatypes. I want to use CheckBoxes to correspond to the bit datatype columns in the SQL table.
How do I bind the checkboxes to the SQL table columns?
Here's what I have, not sure if this is right:
[Code]....
I have a formview with various templates set up for a database that has 255 columns. I need the insertitemtemplate to pre-fill values based upon a specific selection by the user (just like the edit item template) but when the template is switched to insertitemtemplate every text box is cleared. The idea is that a new entry is usually made by making minor changes to an existing entry. With 255 fields I don't want to require the user to enter every field when only three or four need to change.
View 8 RepliesHow to Call a record on datalist by button click and display record on formview in model using Username
Here is what i tried
<asp:DataList ID="GetMergedAll." runat="server">
<asp:Label ID="Name" runat="server" Text="Label"></asp:Label>
<asp:Label ID="Post" runat="server" Text="Label"></asp:Label>
<asp:LinkButton ID="LinkButton6" runat="server">LinkButton</asp:LinkButton>
</asp:DataList>
protected void Page_Load(object sender, EventArgs e)
[Code] ....
HTML
model here
<asp:FormView ID="Post" runat="server">
<asp:Label ID="Name" runat="server" Text="Label"></asp:Label>
<asp:Label ID="Post" runat="server" Text="Label"></asp:Label>
</asp:FormView>
How do I access a specific control within a FormView's "<InsertItemTemplate>"?
View 2 RepliesIn my "insert tempate", I formatted fields, moved them around so everything looked and acted as needed. My Question) Anyway of taking that work (including the field formatting) and copy to the "edit template" ?
VS 2010 - Language: VB
I have a simple EditItem Template within a Formview that I am using to add a record to a table. There is one field in the form that I would like to assign a variable to. I cannot figure it out. I do not see any properties in VS2008 that allow me to assign the value.
The value that I am assigning is an item number, wich is the primary key in the table that I supply on the form.
I have a question on a simple application - menu's which contain 0...x recipies. I have a formview, and in the formview I have a dropdownlist. The query that populates the dropdownlist depends on the formview's current record ID, how do I get that to put into my data source?
Note that I would prefer not to use the RouteParameter that gives the Formview it's ID as the RouteParameter doesn't use the formview's primary key as I'm using the menu name instead
My code is:
[Code]....
<asp:formview id="fvMenu" datakeynames="MenuID" datasourceid="dsMenu" runat="server">
using asp.net 3.5
i am trying to add a dropdownlist and a checkbox inside (edit template) FromView with SQLdatasource ,, what is the UPDATE command i shoud use ??
I am trying to change the textboxes in the FormView insert template to dropdownlists but they keep setting the parameters to null. Here's what I have:
[Code]....
In Page_Load
CType(frmSurvey.FindControl("ddlYearOfQualification"), DropDownList).Items.Add(New ListItem("2010", "2010"))
CType(frmSurvey.FindControl("ddlYearOfQualification"), DropDownList).Items.Add(New ListItem("2009", "2009"))
and in the SqlDataSource
InsertCommand="INSERT INTO [tblSurvey] (... [YearOfQualification] ...) VALUES ( ... @YearOfQualification ... )
And in insert parameters:
<asp:Parameter Name="YearOfQualification" Type="Int16" />
And the insert fails with YearOfQualification as null. If I sue the standard textbox:
<asp:TextBox ID="YearOfQualificationTextBox" runat="server"
Text='<%# Bind("YearOfQualification") %>' />
I keep getting a null reference when I try to access a listbox inside the EditItemTemplate of a formview. I check the mode before accessing the control (Formview1.CurrentMode) to make sure it is in edit mode and even set it manually to edit mode again! But formview1.findcontrol("blah") returns null. Formview1.EditItemTemplate does not have a FindControl method, not sure what else to try.
View 1 Repliesi am try to access control Label in header template of forview i have tried following code but it doesnot worked.
Label l =(Label) frmuserDetail.HeaderRow.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
Label l=(Label)frmuserDetail.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
I am using FormView to display one record at a time and after I add a new record, it won't display the last recorded added.How can I force FormView to display the last record added?
View 2 RepliesI have a form view with a normal paging scheme with links to go to the first, previous, next, last, or the
nth record. I want to add a little bit more functionality to this by allow the user to search within the data set while keeping the original paging scheme.
The table structure has one primary key, pk1, and k2 along with some other data fields. There are about 5,000 records in the table.
Currently, when the page loads, I see something like the following: ([______] represents a textbox)
First Prev Record 1 of 5000 Next
Last Go to record # [_____] Go
Go to: pk1: [_____] AND pk2: [______] Go
pk1: 5000
k2: 400
...rest of the fields
I want something like this though when the user enters 8000 in the pk1 textbox and 500 in the k2 textbox:
First Prev Record 3958 of 5000 Next
Last Go to record # [_____] Go
pk1: 5000
k2: 400
...rest of the fields
The problem I have is that the pagination won't display the record's place out of the initial query (3958 of 5000), but rather displays 1 of 38. I want to allow the user to be able to *jump to* the record that they are looking for instead of filtering the results.
I have a Formview to add new record to a sqlsource. This Form in Edit mode has New button for adding new records so this is perfect.
However in some case, this source could be refreshed and all records deleted and then ready to accept new records. However, I found once there is no record returned from sqlsdatasource, this Formview does not display at all, including that New button and so the whole page is blank.
how to make sure the Formview display that New button even when their is not yet record from the database.
When page load it is invisible. I have a button1 onclick make it visible and people can input data the press insert. I set it invisible right in Formview Insert eventhandler code.
When people click that button1 again to add 2nd record the form appear again as desired. However, the data from 1st record is still there.
What code I can make in eventhandler to make sure when button1 is clicked the Formview does not contain any data from last entry ?
The formview clear the data from 1st record if I did not set visible/invisible.
I am using a formview to show data, with edit, insert and delete enabled. My problem is with the insert.When i click the insert, the formview changes fine to the template for inserting new data, the problem is it was allowing the user to insert the ID themselves, I have made this readonly, but how would i go about ensuring the ID key is made the next number in line? and that it is printed to this textbox?
View 1 RepliesI have a formview which contains a question and 5 checkboxes with answers alongside. Some of the questions are true/false so I want to make checkboxes 3, 4, and 5 invisible.
Should this be handled in code-behind? (I don't see any ready-made events for paging through the formview) or is there a way to test data and change the visible property in;
<asp:CheckBox
ID="CheckBox3"
runat="server"
/>
<asp:Label
ID="QA3Label"
runat="server"
Text='<%#
Bind("QA3") %>'
/>
There is select and update SQLs in sqldatasource and checkbox in formview which is 2way databinded to an sqlserver bit field type.
it always gives same error
Specified cast is not valid
I excpect nobody posts me an "eval" solution.because update is a need for checkboxes which are attached to a bit field.
a ready-to-use small sample project with DB I attached HERE
Specified cast is not valid.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidCastException: Specified cast is not valid.
Source Error:
[Code]....
I wish to remove the edit button in the formview item template if a particular user is not authorized, how do you accomplish the removal?
View 6 RepliesI'm trying to use a required field validator on a fckeditor inside a formview edit template, but it's not working and I can't seem to get any google searched methods on this to work.
View 4 RepliesI have a Formview residing inside am Item Template of a Gridview. The formview is not populating, and I am pretty convinced that I am not passing the parameter properly from the Gridview to the Formview. I have listed the relevant code only, so that you can scan though it easierGridview tag:
[Code]....
Gridview's Datasource:
[Code]....
Formview's tag inside Gridview template field:
[Code]....
Formview's datasource:
[Code]....
I have FormviewPagerTemplate that is working fine but the problem is coming when I'm in the first or last record only.
if I'm in the first record and want to navigate to the second record I have to hit next linkbutton twice
if I'm in the Last record and want to navigate to the previios record I have to hit previuos linkbutton twice
See my code below:
[Code]....
I am making a message module in asp.net with database of sql. i have made a gridview and enabled selecting. and a form view is synchorised with grid view on selecting. i am writing update sql but could not get a way to take data on Gridview or Formview to compare the record in sql database.
this is my page view
[Code]....
This my vb code
I have a formview with both edititem template and item template as following:
<asp:FormView ID="PFTFormView" runat="server"
DataKeyNames="PFTId"
EnableModelValidation="True" Width="90%"
OnItemUpdating="PFTFormView_ItemUpdating"
onmodechanging="PFTFormView_ModeChanging" >
<EditItemTemplate>
<table>
<tr><td class="style1">PFTId</td><td class="style3"><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td class="style1">Last Name</td><td><asp:TextBox ID="txtPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' Width="200px" /></td></tr>
<tr><td class="style1">First Name</td><td><asp:TextBox ID="txtPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' Width="200px" /></td></tr>
<tr><td class="style1">Home</td><td><asp:TextBox ID="txtPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' Width="200px" /></td></tr>
</table><br />
<asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True"
CommandName="Update" Text="Update" />
<asp:LinkButton ID="UpdateCancelButton" runat="server"
CausesValidation="False" CommandName="Cancel" Text="Cancel" />
</EditItemTemplate>
<ItemTemplate>
<table>
<tr><td>PFTId</td><td><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td>Last Name</td><td> <asp:Label ID="lblPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' /></td></tr>
<tr><td>First Name</td><td><asp:Label ID="lblPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' /></td></tr>
<tr><td>Home</td><td> <asp:Label ID="lblPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' /></td></tr>
</table><br />
<asp:LinkButton ID="EditButton" runat="server" CausesValidation="False"
CommandName="Edit" Text="Edit" />
</ItemTemplate>
</asp:FormView>
on my code behind, I have:
Sub PFTFormView_ItemUpdating(ByVal sender As Object, ByVal e As FormViewUpdateEventArgs)
Dim PFTObj As New PFT
Dim PFTDST As New Data.DataSet
Dim newPFTLastName As String = DirectCast(PFTFormView.FindControl("txtPFTLastName"), TextBox).Text
Dim newPFTFirstName As String = DirectCast(PFTFormView.FindControl("txtPFTFirstName"), TextBox).Text
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
If PFTObj.UpdatePFT(Session("PFTId")) Then
Me.lblErrorMessage.Text = "PFT Update Successfully"
Else
'
Me.lblErrorMessage.Text = "PFT Update UnSuccessfully"
End If
PFTDST = Nothing
PFTObj = Nothing
end sub
The problem is:
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
are not returning the updated value from the form.
I wish to add a sub to vb file that changes the display value of several asp:panels located in a Formview Item Template. My only question is what is the proper event to run this in. (databound, item created etc...) If it matters this formview appears in a Gridview Item Template.
View 7 Replies