In my "insert tempate", I formatted fields, moved them around so everything looked and acted as needed. My Question) Anyway of taking that work (including the field formatting) and copy to the "edit template" ?
VS 2010 - Language: VB
I have a formview with various templates set up for a database that has 255 columns. I need the insertitemtemplate to pre-fill values based upon a specific selection by the user (just like the edit item template) but when the template is switched to insertitemtemplate every text box is cleared. The idea is that a new entry is usually made by making minor changes to an existing entry. With 255 fields I don't want to require the user to enter every field when only three or four need to change.
View 8 RepliesHow do I access a specific control within a FormView's "<InsertItemTemplate>"?
View 2 RepliesI have a simple EditItem Template within a Formview that I am using to add a record to a table. There is one field in the form that I would like to assign a variable to. I cannot figure it out. I do not see any properties in VS2008 that allow me to assign the value.
The value that I am assigning is an item number, wich is the primary key in the table that I supply on the form.
I am trying to change the textboxes in the FormView insert template to dropdownlists but they keep setting the parameters to null. Here's what I have:
[Code]....
In Page_Load
CType(frmSurvey.FindControl("ddlYearOfQualification"), DropDownList).Items.Add(New ListItem("2010", "2010"))
CType(frmSurvey.FindControl("ddlYearOfQualification"), DropDownList).Items.Add(New ListItem("2009", "2009"))
and in the SqlDataSource
InsertCommand="INSERT INTO [tblSurvey] (... [YearOfQualification] ...) VALUES ( ... @YearOfQualification ... )
And in insert parameters:
<asp:Parameter Name="YearOfQualification" Type="Int16" />
And the insert fails with YearOfQualification as null. If I sue the standard textbox:
<asp:TextBox ID="YearOfQualificationTextBox" runat="server"
Text='<%# Bind("YearOfQualification") %>' />
I keep getting a null reference when I try to access a listbox inside the EditItemTemplate of a formview. I check the mode before accessing the control (Formview1.CurrentMode) to make sure it is in edit mode and even set it manually to edit mode again! But formview1.findcontrol("blah") returns null. Formview1.EditItemTemplate does not have a FindControl method, not sure what else to try.
View 1 Repliesi am try to access control Label in header template of forview i have tried following code but it doesnot worked.
Label l =(Label) frmuserDetail.HeaderRow.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
Label l=(Label)frmuserDetail.FindControl("lblUserName");
l.Text=HttpContext.Current.User.Identity.Name;
I'm putting together a page that allows the user to enter a new record in an SQL table. A bunch of the fields in the table are bit datatypes. I want to use CheckBoxes to correspond to the bit datatype columns in the SQL table.
How do I bind the checkboxes to the SQL table columns?
Here's what I have, not sure if this is right:
[Code]....
I am using a formview to show data, with edit, insert and delete enabled. My problem is with the insert.When i click the insert, the formview changes fine to the template for inserting new data, the problem is it was allowing the user to insert the ID themselves, I have made this readonly, but how would i go about ensuring the ID key is made the next number in line? and that it is printed to this textbox?
View 1 RepliesI wish to remove the edit button in the formview item template if a particular user is not authorized, how do you accomplish the removal?
View 6 RepliesI'm trying to use a required field validator on a fckeditor inside a formview edit template, but it's not working and I can't seem to get any google searched methods on this to work.
View 4 RepliesI have a Formview residing inside am Item Template of a Gridview. The formview is not populating, and I am pretty convinced that I am not passing the parameter properly from the Gridview to the Formview. I have listed the relevant code only, so that you can scan though it easierGridview tag:
[Code]....
Gridview's Datasource:
[Code]....
Formview's tag inside Gridview template field:
[Code]....
Formview's datasource:
[Code]....
I have a formview with both edititem template and item template as following:
<asp:FormView ID="PFTFormView" runat="server"
DataKeyNames="PFTId"
EnableModelValidation="True" Width="90%"
OnItemUpdating="PFTFormView_ItemUpdating"
onmodechanging="PFTFormView_ModeChanging" >
<EditItemTemplate>
<table>
<tr><td class="style1">PFTId</td><td class="style3"><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td class="style1">Last Name</td><td><asp:TextBox ID="txtPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' Width="200px" /></td></tr>
<tr><td class="style1">First Name</td><td><asp:TextBox ID="txtPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' Width="200px" /></td></tr>
<tr><td class="style1">Home</td><td><asp:TextBox ID="txtPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' Width="200px" /></td></tr>
</table><br />
<asp:LinkButton ID="UpdateButton" runat="server" CausesValidation="True"
CommandName="Update" Text="Update" />
<asp:LinkButton ID="UpdateCancelButton" runat="server"
CausesValidation="False" CommandName="Cancel" Text="Cancel" />
</EditItemTemplate>
<ItemTemplate>
<table>
<tr><td>PFTId</td><td><asp:Label ID="lblPFTId" runat="server" Text='<%# Eval("PFTId") %>' /></td></tr>
<tr><td>Last Name</td><td> <asp:Label ID="lblPFTLastName" runat="server" Text='<%# Bind("PFTLastName") %>' /></td></tr>
<tr><td>First Name</td><td><asp:Label ID="lblPFTFirstName" runat="server" Text='<%# Bind("PFTFirstName") %>' /></td></tr>
<tr><td>Home</td><td> <asp:Label ID="lblPFTHome" runat="server" Text='<%# Bind("PFTHome") %>' /></td></tr>
</table><br />
<asp:LinkButton ID="EditButton" runat="server" CausesValidation="False"
CommandName="Edit" Text="Edit" />
</ItemTemplate>
</asp:FormView>
on my code behind, I have:
Sub PFTFormView_ItemUpdating(ByVal sender As Object, ByVal e As FormViewUpdateEventArgs)
Dim PFTObj As New PFT
Dim PFTDST As New Data.DataSet
Dim newPFTLastName As String = DirectCast(PFTFormView.FindControl("txtPFTLastName"), TextBox).Text
Dim newPFTFirstName As String = DirectCast(PFTFormView.FindControl("txtPFTFirstName"), TextBox).Text
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
If PFTObj.UpdatePFT(Session("PFTId")) Then
Me.lblErrorMessage.Text = "PFT Update Successfully"
Else
'
Me.lblErrorMessage.Text = "PFT Update UnSuccessfully"
End If
PFTDST = Nothing
PFTObj = Nothing
end sub
The problem is:
PFTObj.PFTLastName = newPFTLastName
PFTObj.PFTFirstName = newPFTFirstName
PFTObj.PFTHome = DirectCast(PFTFormView.FindControl("txtPFTHome"), TextBox).Text
are not returning the updated value from the form.
I wish to add a sub to vb file that changes the display value of several asp:panels located in a Formview Item Template. My only question is what is the proper event to run this in. (databound, item created etc...) If it matters this formview appears in a Gridview Item Template.
View 7 RepliesI'd like to implement a custom paging template for my formview that displays numeric paging as well as next/previous buttons. The pre-defined templates only appear to have numeric first last as an option. Can anyone recommend a good article that covers this?
View 2 RepliesI have a master page with a textbox that I want to use for a search, and display the results on the content page.
I've dragged in the datasource to the content page, and configured the formview to use that datasource... almost.
The issue I'm having is that on the last step of the configure datasource wizard where you select the parameters, I want to select the master page textbox control for the search parameter... but of course it's not available in the list. The list only allows me to choose controls from the content page.
How do I set this master page search box as the parameter for my datasource?
I'm using visual web developer and MS.Access and have the following created. 1. A formview control to enter data into the database 2. A File upload control that allows users to upload files. But however i'm unable to include the file upload control in the formview control. How can i achieve this? Below is the code for the page:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="NewRecord.aspx.cs" Inherits="NewRecord" %>
I am working on a medium size web site and I am kind of stuck. I need to do the following
1- admin user fill a form and submit (Done)
2- the system create new page storing the info provided in step 1
how can I do that? I need a page to be created I don't want to read the data from data base and display it on a template
I would like to ask if it is possible to access data on a master FormView from a nested detail FormView.
I have a main form (master) with several tabs (detail) and would like to display a label with text from main form that is hidden by the tab at the moment of editting. My asp page looks like this.
[Code]....
Is it possible to get the value of the label CompanyTextLabel from CompanyTextBox using just ASP.NET expressions or something similar without writing c# code in .cs file?
Is there a way where I could copy all the asp:ListView ItemTemplate Items into a DataTable?
My ListView Items contain TextBoxes and Labels.
I have a nested formview. I need to set a value for a textbox when I'm in insert mode from parent formview which is editmode.
View 4 RepliesI have a gridview based on a sqldatasource that has some colums from which two colums showing the data of two fields: field1 and field2. field1 is an ID which should not be updated and therefore it is readonly=true. The sql-query from the sqldatasource is:
SelectCommand="SELECT field1, field2 from anyView"
What I want is, that when a row is updated, then the value from field1 should be copied to field2 The update-query is:
UpdateCommand="UPDATE myTable SET field2=@field2 WHERE field1=@field1"
My idea was, that the @field2 paramter gets the value from the query string out of field1:
<UpdateParameters>
<asp:QueryStringParameter Name="field2" QueryStringField="field1" Type="Int32" />
</UpdateParameters>
But this does not work. Is there an easy way to copy the data from field1 to field2 when updating the row? In addition, is this possible, even if field2 ist not shown in the gridview (i.e. field2 is selected in the query but is not a field in the gridview but should be updated with value of field1).
I have a formview that use the formview iteminserted event. The information inserts into the formview fine, but all cells blank out after the insert. How can I make it so I can show all the values I have inserted show up in the formview after the inteminserted event?
View 2 RepliesI'm trying to setup a gridview control to have a column full with a hyperlink called "Details" that redirects to a template page that has a formview control. It's supposed to transport the productID of it's corresponding row to that other page, which already has an Entitiy DataSource setup to a database, and it's supposed to use that product ID to fill in fields on that Formview Template.
I was trying to copy this tutorial:
[URL]
but he uses a listview control instead. Reason I'm using gridview is because it's a gridview that filled on the spot after it's queried to by a search engine.
How would I accomplish somthing similar but with gridview controls instead of listview controls? What kind of syntax would I want to be looking at?
I have a gridview which the columns are created programmatically.
When a button is click i will clear all columns and add the columns that I want. Im adding a boundfield which is not a problem. When I add a template field, I must add also the item template which is my problem.
How can I add a item template in the template field I created which is binded in my datasource. Also what event handler should I use to do this.
Here's the part of my code:
[Code]....
Someone know how can I bind a label item template from the datasource. The label item template should be firstname + middlename + lastname.
If im not doing it programatically, it will be just concatenating eval(). But how can create item template and bind it programmatically?
