Forms Data Controls :: Commandargument Wouldn't Change For Session As Long As I Didn't Refresh The Gridview?
Jan 29, 2010
I have a gridview set up as follows:
[Code]....
Now, as you can see I've set up the commandargument, and was expecting to get to that in my code behind file. My code is as follows:
[Code]....
Ok...so far so good, and as long as I'm the only one working on the system it works fine. The problem is if this scenario happens:
* I go to the page and look at the gridview
* Someone else enters a new record into the database, causing the first row to contain a new record (not displayed in my browser)
* I click select.
What happens then is that, for some odd reason, I will get n numbers higher than the one I actually selected (n = num_added -num_removed).
I was under the impression that the commandargument wouldn't change for my session as long as I didn't refresh the gridview...?... There are no ajax or anything else messing with postbacks or viewstate as far as I can see..
View 5 Replies
Similar Messages:
Feb 10, 2011
can i add commandname or commandargument to a checkbox-control in a gridview?
View 5 Replies
Jan 20, 2011
I have a gridview and I have a link button that fires the onrowcommand event. In the method I have
protected void SelectCreditCard(object sender, GridViewCommandEventArgs e)
{
int index = Convert.ToInt32(e.CommandArgument);
}
But I get the error input string in incorrect format.
View 5 Replies
Dec 1, 2010
I have GridView in UserControl (ascx) who is in another ascx.
[Code]....
View 2 Replies
Jan 13, 2010
I am making some application in asp.net 1.1 in that I am displaying data in datagrid from database. In data grid first column is of check box and radio button and in the last column we have text box now thing is that when i click on check box crosponding textbox we fill some figure and at the end we press calculate button to get total. After getting total we have to press continue button to go next step
But suppose if some body remove that check the we should press calculate button or chnage some figure in the text box then we should press calculate button again to recalculate. for that i kept autopost back on check box oncheckedchanged event and text box ontextchanged event and hide continue button so user will click calcutae button abd then continue button will re-apper
Problem it that it taking too much refresh and taking long time. So was lloking for some ajax method to use in my application.
View 8 Replies
Feb 16, 2011
I am using the following code to change the header based on the session variable
[code]....
View 2 Replies
Jan 14, 2010
I am using a Gridview on a webform. Got the editing/updating all working correctly. Problem is, all the data is on one row and it is alot of data. I thought about splitting the data into 2 gridviews but then all of the employee data isn't lumped together like the higher ups want.
I have done research on a DataRepeater as it will give me the formatting I need it but it doesnt support editing.
View 12 Replies
Nov 23, 2010
For a given MS SQL Database table of staff members, I'm using ASP to display each record line by line as follows:
So I've added 2 ImageButtons in an extra column and the problem I have is passing the record id as a CommandArgument to redirect to a secure page where the record can be edited or deleted.
Here's some code:
[Code]....
[Code]....
ctdRdr(0) evaluates to the ID value for the the record. )
When I click on the 'Delete' ImageButton the URL in the Response.Redirect becomes:
ctdirectory_secure/deletemember.aspx?id=<%@%20ctdRdr(0)%>
instead of, say:
ctdirectory_secure/deletemember.aspx?id=435
I'm assuming that a <%= expression %> cannot be used to set a control parameter, but how else can I do it?
View 5 Replies
Jun 7, 2010
I have a ListView and I'm using the option <InsertItemTemplate>. Inside this template I have two control: TextBox and Button.
I'm having tourble in C# to read the CommandArgument of my button OnCommand event:
What am I doing wrong?
protected void AddComment(object sender , CommandEventArgs e)
{
string Args = e.CommandArgument.ToString();
}
<asp:Button
ID="buttonComment"
OnCommand="AddComment"
CommandArgument='<%#
Eval("MyId")%>'
runat="server"
/>
View 8 Replies
Mar 14, 2011
I have a button inside a table in gridview templatefield and i want to access its row index value in row_command event
i used this line.
Dim index As Integer = Convert.ToInt32(e.CommandArgument)
but got error .Input string was not in a correct format.
However i am able to fetch the row index value in button _click event using this line.
Dim index As Integer = (CType(CType(sender, Control).Parent.Parent, GridViewRow)).RowIndex
View 11 Replies
Jul 23, 2010
In one grid there is only one column and entries are 100+, all entries are hyperlink entries, but the gridview does not look nice with one column and 100+entries, is there any way I can split that entries in 3-4 coluns to look even.
View 3 Replies
Jan 11, 2010
It becomes more and more complicated, how can I access the commandArgument of a LinkButton inside a ListView that is in a Accordion control?
View 5 Replies
Sep 20, 2010
I have NHibernate sessions cached in the ASP.NET session.
I came across a situation where a user edited an object so it's in their first level cache in the ISession. Another user then edited the same object.
At this point User1 still sees their original version of their edits where as User2 sees the correct state of the object?
What is the correct way to handle this without manually calling session.Refresh(myObj) explicitly for every single object all the time?
I also have a 2nd level cache enabled. For NHibernate Long Session should I just disable the first level cache entirely?
Edit: Adding some more terminology to what I'm looking to achieve from 10.4.1. Long session with automatic versioning the end of this section concludes with
As the ISession is also the (mandatory) first-level cache and contains all loaded objects, we can propably use this strategy only for a few request/response cycles. This is indeed recommended, as the ISession will soon also have stale data.
I'm not sure what kind of documentation this is for it to include both probably and then immediately say the session will have stale data (which is what I'm seeing).
View 3 Replies
Dec 27, 2010
I made a gallery with datareapeter the show only a picture.
i want with page refresh change picture.
View 9 Replies
Jan 12, 2011
I have a gridview in a web page that shows some data from a table; in the same page I have a button that onClick executes a SQL Server job (the job has 9 steps and it takes around 20 seconds to execute).
How do I modify my code so that the page is smart enough to wait until the job is executed and refresh the gridview with the new data? Currently this is what I have:
[Code]....
The last method (GridView1_RowDataBound ...) is for having the background to red if some condition occurs.
Right now, after clicking ImageButton0, there is an instant postback and the gridview is not updated
View 2 Replies
Apr 20, 2010
How to change the values in gridview on text change of templated control without databind again?the value of templated text boxes should change If i change the value of one of the templated textbox then accordingly(By mathematical calculations) the vlaues of all tempated textboxes should also change.
View 7 Replies
Sep 14, 2010
When i run the following code i get an error when gridview changes mode to Edit. stating that you can't change string to decimal!
To get around the occurance i want to disable code when in Edit mode or resolve another way?
GridView1_RowDataBound
For Each row As GridViewRow In GridView1.Rows
Dim cell As TableCell = row.Cells(7)
Dim invoicetotal As Decimal = CDec(cell.Text)
View 2 Replies
Mar 7, 2011
I have a gridview in which I have several editable fields. The user wants a non-editable field to be modified if another field is modified in the same row. e.g. if Age>=65, Status should ="Retired"
I am using the following demo: [URL]
to create a bulk edit gridview so some columns are automatically editable and others aren't, with a single update button. I can set Status="Retired" in the xml generated, or as a rule in database table. But I'd like the status field in the gridview to change when Age is modified and to be shown to user before they press the single Update button. I'm using update panels and ajax on the page also.
View 1 Replies
May 7, 2015
How to wrap the column of a gridiew?
View 1 Replies
Apr 29, 2010
i have a website which has a listview control and databind in a SQLdataSource Control, and in its ItemTemplate has a HTML Image Control.
but when i run the website, it displays other fields from the Database but the image is not displaying,
to test if there is a problem in the link of the image or the image it self,
i add a Repeater control just under the ListView Control and Copy the whole ItemTemplate from ListView to Repeater and when i run the website, the image in the Repeater is displayed but the ListView does not.
this is my asp.net code.
[Code]....
View 5 Replies
Oct 13, 2010
I have a gridview and a formview on one page.When a row of the gridview is selected, the details will load in the formview.When i edit the details (f.e. change a name) in that formview and save them, the gridview will just show the old data (=old name).I have to reload/F5 the page to see the changes in the gridview. Why isn't the GV updated when i do a databind() in the onclick-event of the update-button in the edittemplate of the formview?This example is using the northwind database:
ASPX:
[Code]....
Code behind:
[Code]....
View 6 Replies
Apr 7, 2014
In my website, there is a page called "SMS Log"It contains a GridView, in which there are 5 columns:
1) SMS sent time
2) SMS Text
3) Recipients
4) status
5) Button (view detail) since, "SMS Text" is large and "Recipients" are more than 1.
So Gridview looks very conjusted, also it does not look good.Is there any other control I can use other than Gridview to show above 5 columns in a well organized way.
View 1 Replies
Mar 3, 2010
I have a problem when I try to pass in paramaters for a report in my report viewer. I have set up the ObjectDataSource and set the paramaters for 3 text boxes that are on the page. The only way I have found to set the paramaters for the report is the user must fill in the paramaters and hit the refresh button on the Report Viewer toolbar ,but I would like to have the user click a asp.net button insted. Is there anyway to call the refresh method from codebehind?
View 1 Replies
Jan 17, 2011
I'm trying to update my gridview after inserting data but insert function cannot handle. I don't know what i am doing wrong. Functions are below. waiting for your comments.
[Code]....
[Code]....
View 2 Replies
Mar 17, 2010
I have a Gridview connected to an Access database using a Datasource and a query SELECT * FROM [Staff]. In order to update the grid view I have to do it in the IDE and click Refresh Schema. I have tried:
StaffList.SelectCommand = "SELECT * FROM [Staff]"
StaffList.UpdateCommand = "SELECT * FROM [Staff]"
StaffList.DataBind()
Staff.DataBind()
At runtime I want it to update the Gridview.
StaffList.SelectCommand = "SELECT * FROM [Staff]"
View 5 Replies