Forms Data Controls :: Finding The Dynamic Templatefield Control In A Gridview?
Dec 16, 2010
I have a gridview where I in codebehind add a templatefield
[Code]....
In my update command when i try to find the "Result" textbox I get a null object
[Code]....
In the gridview there is another templatefield "Name" that consist of two boundfields("Firstname" and "Lastname") This column is added in the design phase and not in the codebehind.I don't have any trouble finding these controls using the ID added in the markup
[Code]....My issue is with the result column that I add in codebehind.
View 3 Replies
Similar Messages:
May 3, 2010
I am using Asp:TemplateField in gridView. I have only ONE TemplateField as follows
[Code]....
I want to find all the textboxes (when grid row is in edit mode) using some kind of loop. I don't want to find the TextBoxes by their names like e.row.findcontrol("..");
I did Response.Write(e.row.controls.count), it show "2". How can I find textboxes without using names
View 5 Replies
Sep 8, 2010
I already implemented the dynamic templatefield which will re-created in every postback. Everytime I make a postback in the page I see no problem but when I click my imagebutton inside the gridview then the dynamic templatefield disappear.
To double check if it is really gone at all I just select the second page of the gridview using my customize paging using dropdownlist outside the gridview and the templatefield with its correct data reappear again.
I already put a variable inside the rowcommand to see if the number of columns are the same with the number of columns the gridview render together with the dynamic templatefield during debugging and it is there but cannot render that templatefield in the client.
View 2 Replies
Dec 23, 2010
(Example code below)
I have a GridView. It has a 'static' TemplateField (in the .aspx page). I add and remove BoundFields to it depending on user preferences on postback. Affter the second postback, the template field appears empty.
Here is a stripped down mockup of what I'm doing. You can click the "Regular Postback" button as much as you want, and nothing bad happens. But if you click the "Recreate" button once-- it's all ok. Click it again, and the "one" column goes on Christmas break.
So is there something else I should be doing, or is this going to be a "halcyon1234 to code interface" error.
[Code]....
View 3 Replies
Aug 24, 2013
How to add dynamic columns in Gridview?
View 1 Replies
Jan 12, 2011
I am using lable control in itemtemplate tage in templatefield tag of gridview control for showing a field of my database .
I want if the lenght of string data is higher than 100 character the lable control doset show all of it ,
View 3 Replies
Feb 11, 2010
I was wondering how to hide a control(lblPrice) in a gridview(Gridview1)'s templatefield, given certain conditions? Like:
If X condition then
-- code to hide lblPrice --
End If
View 6 Replies
Dec 15, 2010
I binded user control in gridview dynamically using templatefield (through code behind)
User control consists of 2 textboxes and one dropdown.
There is one button outside the gridview on the form. On click of that button i have to save the values of usercontrol's (child controls i.e textbox and dropdown values) but i am not able to get the values of user controls.
I am able to get User Control using LoadControl and child controls using FindControl but not able get values i am getting textbox values as blank and dropdown value as 0th selected index even though there is value entered by the user.
View 11 Replies
Mar 18, 2010
how can i access the headertext of a templatefield of a gridview on mouseover and display it in a label control?
View 4 Replies
Jan 31, 2014
I am trying to dynamically create radio buttons based on one of the grid column. If the grid has four rows, it means that there are 4 time slots in the time column and I need to display 4 radio buttons after click of a button on the page. I am able to display radio buttons but dont know how to display dynamically based on grid
View 1 Replies
Feb 16, 2010
I have an object data source control. and to insert the control I add the object to the database then call databing on the gridview the DataSource control is bound to.
My question is - how would I know where the newly added row is? I can'y go by id, because the dbase creates the id.
I'm thinking maybe last data key, but based on the sort that would be accurate.
View 7 Replies
Jan 20, 2010
How to find the client id of a cell in GridView that is in edit mode. I need to attach javascript to the cells of the row that is currently being edited.
View 1 Replies
Jul 8, 2010
Globally i want to find a textbox which is in a gridview such that i can use that variable in any of the events.
Is that possible in .cs file or if not how can we retreive the variable of a textbox in to a function after finding the textbox using javascript in .aspx page .I tried to find a control in .cs file but I couldn't get it.
View 3 Replies
Jul 31, 2010
I work on a custom server control that contains two grids with dynamic templatefield checkbox , the 1st one binded by SqlDataSource, the 2nd grid filled with selected rows in the 1st grid, all is clear, the 2nd grid filled appropriatly but when a button(out of the custom control) click event fired the grid disappear , Second and what is important is how to save state of the checkbox while after postback I must create the field and bind the grid ?
for Template field :
class CheckBoxTemplateHandler:ITemplate
{
void ITemplate.InstantiateIn(Control container) [code]....
View 2 Replies
Aug 10, 2010
I'm using dynamic columns boundfield and templatefield in gridview, the GV embeded in a panel (autoscroll:auto;width:fixe), I fixed 3 columns to fit the panel's width , when I add exceed the 3 columns the width changes !
View 15 Replies
Mar 31, 2010
I have a gridview and basically at page load I want it to display with an empty row. The first field in the gridview would be a template field containing a textbox. I wan't to be able to type in, for example, a product code ('abc'). This would be the parameter for the stored procedure and then the rest of the columns (40+ additional columns) in the gridview would populate with the rest of the data pertaining to that product code (i.e. price, unit of measure, etc.). In short the template field texbox is the control to bind the gridview.
After the row is populated I could click a button or link that would add that entire row to my gridview and then add another empty row where I could enter another product code... populate the row then add that row to the gridview. and so on...
View 5 Replies
Jun 13, 2010
the structure is like this:
Grivdivew
ItemTemplate
PlaceHolder
/ItemTemplate
/Gridview
And then I try to add some dynamic controls into the placehold control from code behind, I use the RowDataBound Event
Private Sub GridView1_RowDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs) Handles GridView1.RowDataBound
Dim ph As PlaceHolder = CType(e.Row.Cells(1).FindControl("PlaceHolder"), PlaceHolder)[code]....
The problem is the button CommandName is not functioning. And more strangely, if I add the button manually into the placeholder, like this:
Grivdivew
ItemTemplate
PlaceHolder[code]....
View 5 Replies
Jun 20, 2010
I want to create simple rating page where player's place,name and rating is displayed. I've created database with ID,Name and Rating Columns, binded Gridview to this database and created TemplateField "Place". With following code I've created numbered list for Place:
protected void Page_Load(object sender, EventArgs e){
for (int i = 0; i < GridView1.Rows.Count; i++)
View 4 Replies
Nov 23, 2010
I have a GridView, bound to a table (Meals) in a SqlDataSource.
Into that GridView, I have added a TemplateField, which contains a DropDownList (which displays the numbers 1 - 10, added manually; no Data Binding). And, I've added a ButtonField.
When I click the Button, I want the values of some of the GridView rows PLUS whatever value was selected in the DropDownList to be pulled out and stored in a second Sql table (Orders).
Pulling the rows bound to the SqlDataSource is easy but JavaScript is needed (I think) to pull the SelectedValue from the DropDownList. I understand women more than understand JavaScript (that's how little I know) and the code below has been kindly offered by another forum user who is at a loss, himself, now.
Here's the code and the error message I'm getting.
ASPX:
[Code]....
And here's the Code Behind:
[Code]....
No design time errors reported but here's the run time error:
Object reference not set to an instance of an object.
On the following line:
Line 28: if (row.RowType == DataControlRowType.DataRow)
View 6 Replies
Mar 11, 2011
[Code]....
[Code]....
I want to add two image button in the TemplateField.. and add it in the gridview.
View 3 Replies
Dec 15, 2010
I have dynamically created my gridview in the codebehind.
All is working correctly.
I now need to dynamically add a TemplateField to the gridview and populate it with a Button.
I have the following code so far:
TemplateField tempField = new TemplateField();
Button btnRemove = new Button();
View 4 Replies
Jan 7, 2010
I am in need of some assistance in regards to how to best set the values of properties for a Web User Control which is being included into a cell of a GridView with dynamically created columns. I have tried a few different approaches, but can't seem to get a satisfactory result. Also, to be completely honest, I am not really sure if I am using best practices for what I am trying to accomplish.
First off a little background:I have a GridView for which we will never know the exact number of columns at run time. The columns are predicated by user selection. I am creating the command text for the DataSet on the fly and then looping through the columns of the resulting DataTable in order to use custom TemplateFields. This works ok for just printing out the row values but not so much for when I need to insert the Web User Control into a cell.The Web User Control is in essence a collection of image links which are used as a "Quick Nav" tool. I need to pass the values of 2 fields from each DataRow to the control via properties (for example, CustID and ProductID). I am using custom TemplateField classes inheriting from ITemplate for displaying my fields and extending the DataBinding event like so: [Code]....
This won't work for my User Control as DataBinding is called after the control is loaded into the page and I need the properties to be set before the Page_Load event of the control is fired.Is there a GridView event I should be looking into instead such as RowCreated or RowDataBound? Or should I modify how I loop through the DataTable by doing rows first, then the resulting columns as I've seen done elsewhere?
View 5 Replies
Feb 4, 2010
I'm relatively new to the VS environment. I'm using VS2010 Beta 2 with VB. I have a Gridview setup to pull a list of employees. Next to their name I have edit and delete icons. When I leave the icons as ButtonFields, they pass the DataKey value to my code behind perfectly. When I convert the ButtonFields to TemplateFields, they no longer pass the DataKey.
[Code]....
[Code]....
[Code]....
View 2 Replies
Mar 9, 2011
I have problem while set or passing value from code behind to asp:label inside gridView asp:templateField. 1st. I have gridView and using SqlDataSource control for data source. This is my gridView code?
[Code]....
2nd. I have SqlDataSource for my GridView. this is the code :
[Code]....
We can set value in the *.aspx or design view by using <%# bind("str_isi") %> like the asp:label control with ID=lblGvPengumuman but how we can set value in code behind?
View 7 Replies
Jun 16, 2010
i want to sort a gridview column which is a template field with a repeater control in it. this column has multiple links and i would like to sort using the first link. how can i achieve this.
here is my code:
<asp:TemplateField HeaderText="Groups">
View 2 Replies
