Forms Data Controls :: Get OnClientClick Control To Work Correctly?
Mar 12, 2010
I want to display a warning message and then open a panel on my form in response to a button click in my gridview.
I have used this on another form with a delete command in a gridview column and it work perfectly.
Why isn't it working with my select command ?
Here is the code:
<asp:LinkButton
ID="LinkButton3"
runat="server"
CommandName="Select "
OnClientClick
=
"return confirm='Are you sure that you want to delete this record ?');">Select</asp:LinkButton>
</ItemTemplate> </asp:TemplateField>
when i am trying to use a repeater to display data in a wizard control, everything seems worked as expected before i change the value of wizard's DisplaySideBar, here is my demo code:Test.aspx:
[Code]....
Test.aspx.cs:
[Code]....
guys who intrest on this you can copy this code and test it on your pc, when we click the link button in repeater's item will do nothing at the first time but it will work when we click it again.i have debug this and found that when the page is not in post back, the linkbutton's id will be "MainWizard_rpMain_ctl01 _lbEdit" in prerender method but after render it will change to "MainWizard_rpMain_ctl04 _lbEdit", but when page have been post back, the clientid will be correct as "MainWizard_rpMain_ctl01_lbEdit" and then event can be fired correctly.i thought this is a bug of .net framework, when i set the value of wizard's DisplaySideBar, it will ask to re-create controls but repeater haven't clean the item's count and then recreate item will use wrong item index, i hope this message can be post to .net framework team and they can find out what's the matter on it.
I have a tab container with two tab panels. In the first panel, I have a ropdownlist inside a detailsView. The user should not go to the second tab panel with out selecting something in the dropdownlist other than the default N/A.
I have a User Control (ascx) and a property which a want to display in my categories tab in Visual Studio in the category named "Styles".
[Code]....
And here is the problem: Actually I do not need a get, because I only have to set the property (write only property). But when I omit the get, the property is displayed in the "Misc" category in the categories tab in Visual Studio. Only when I code the get as well, then the property is displayed correctly in the "Styles" category in the categories tab in Visual Studio.
Does anybody know why? How can I display the category correctly only with set?
I have a custom page (Page 1) in SharePoint where I have a repeater control. From Page1 I open Page2. This is where I generate a collection of object which i use to bind repeater control in Page1. For the first time everythings work fine. If I have 5 objects to bind, repeater control shows 5 elements.
Now assume, I have 5 elements in page 1. When I open page two It carried over same 5 elements. I delete 1 element and send 4 element as collection to Page 1. In page 1 after I databind the repeater control, it doesn't display correctly. It deletes the wrong element.
I debug my code. The collection which i am binding to repeater shows the correct elements. But while displaying i is not showing correctly.
Server tags don't work here. I spend a 1-2 hours to find some way to make this work, but i didn't find anything.
Server tags works in:
<OnClientClick="JSFunc();" <script type="text/javascript"> function JSFunc() { var el = document.getElementById('<% # tb.ClientID %>'); //some actions with el here } </script>
or something others with c#.
Is There no way to make server tags working inline? (first example)
var TargetBaseControl = null; window.onload = function() { try {[code].... //get target base control. w hen i run the page and click the button then no more further processing just button has been click nothing happan......
My program has 4 pages that have session variables on each page and they are retrieved on the 4th and final page then submitted to a database when the submit button is clicked. When i was testing my program i filled out all 4 pages and then clicked back to refill-in something on a previous page and all my information wasn't filled out anymore. So i added the code in the page load sub btnBack.Attributes.Add("onClick", "javascript:history.back(); return false;") and this cured that problem so i could click back and the data would still be filled out.
Then i saw a new problem....after i went back to fix something on previous pages 1 and 2, i would click the next button to go forward to pages 3 and 4 that i've already started filling out and now the data on those pages were cleared. So how do i make it so that the information from the whole program stays filled out whether i go back and forth from the 1st page to the 4th until i click submit on the 4th page?
I have a gridview with a template column that causes a postback on check changed in order to change display. It works fine:
[Code]....
And the code behind:
[Code]....
Works great, right? Well I wrote a small javascript file to make the checkboxes mutually exclusive, but now, while the post back refreshes and the javascript works, it does not show the popup extender anymore - it doesn't even enter the codebehind function.
i have a column in a gridview with an imagebutton in a column. i added an onclientclick event so that a html confirm dialog shows with ok and cancel button, so that if you click cancel, the event should not continue, but if you click ok, the gridviews onrowcommand should fire. The grid is as follows:
[Code]....
[Code]....
but when i click the button on the grid, the alert comes up and if i select ok, i get the following exception:
I'm using the OnClientClick to return the confirm message box. This is what i have so far:
[Code]....
I want to be able to pass one of the fields to it, such as a name, to enhance the confirmation. I want it to be more informative by adding the product or customer name. This should make it read more like this "Are you sure you want to delete the customer Jones?" I suspect I will have to use the {0} but don't understand what I will need to do to get this to work.
on clicking the update button the validation summary should appear..but it is nt appearing instead the clientsript appear first, it should validate all the fieldsas required then it calls the clientsidescript..Do you want to save the modifcation?..here is my code below..
I have a page for a product listing using a datalist control. I have customized the item template and added a link button that says Click to Order. I then databound that linkbutton with the onclientclick to the "ProductID" field, but I would like to set a variable or use some method of getting the productID of which item they clicked so I can add that product to an order. I cannot understand how to find out which item was clicked though... here is my code:
I have a GridView with a couple of buttons (asp:Button) in it (last row). Both of them have a CommandName attribute on them and this is handled server side in a grid_RowCommand event handler. Now, this works fine. However, I need to add client side code (Javascript/jQuery) to disable the two buttons when someone clicks on or the other. This is to prevent the user from double-clicking and creating potential havoc.
The way I have done this is by adding OnClientClick on both buttons which calls a javascript function that uses jQuery to disable the two buttons. This works fine, it's just that the page doesn't post back and so the RowCommand event handler never fires.
I have a presentation to the CFO in two hours. I can't get a nested repeater control to work right, something to do with teh placement of the <table> tags I think.The first repeater first section works fine, then the child repeater shows the first child section right, but the next section of the parent repeater loses all the formatting applied at the parent table. I've tried vaious permutations of where to place the closing table tag of the outer and the inner and get different results, but never the right results.
Why might gridview only work correctly after reloading the page in IE? And, why does it work correctly on the first page load in Firefox? How might I solve this problem? I thought of trying to instantly reload the page with Javascript if the browser is IE, but this is kind of a bad workaround.
I just want to add some client side (JQuery Javascript) validation in a web user control. I put an OnClientClick handler and the function gets called. BUT, even if I return "false", the OnClick method always get fired. What am I doing wrong ?
I'm with VS 2010, targeting the 4.0 framework with JQuery 1.4.2. and JQuery UI 1.8.4.
I'm using a GridView to retrieve data from a stored procedure using a SQLDataSource (db is SQL Server 2008). When I compile my application and go to my website, all the data is loaded and shown fine. If I was to add a new entry to the table however (a seperate page on my website has a Wizard control to facilitate this) and then return to the page with the GridView, the new entry doesn't show up.
Looking from SQL Server, the data has been added, but the GridView isn't updating to show it. If I were to recompile the project with F6 and refresh the page, the new data will show up. I tried calling DataBind() on the GridView in the Page Load event, however the issue still remains.