[Code]....
I am trying to store decimal values from detailview. But it doesn't work. It stores decimal values after rounding. Let's say if I enter length/width as 4.2000 then in sql it stores as 4.0I am using sql server 2008 and the field is defined as decimal(8,4).I tried diff combination but nothing is working.
I have my form set in french as well, and it automatically changes the text format to use ','. However When I try to insert my values into the database it says cannot convert nvarchar to decimal? Worst case, Is there a way I can disable the numbers from changing to use ',' and just use '.' always regardless what language it is?
View 1 RepliesI'm trying to execute this statement every minute with SQL Agent, I have it set up as a job:
[Code]....
It's trying to update a column which data type is set to decimal. Just so you know what I really need out of it, here is an example:
[Code]....
The answer of which should add on 0.5 to the original value. If I were to use the increase value of 60 which then becomes 60/60 it will work.I'm dividing by 60 because the increase value is per hour so I make it smaller to get per minute value. Why is it doing this?
I am trying to bind upto 3 values to a HyperLink control in a DetailView control to create a query string but it does not seem to work.
Following is my code for the HyperLink:
[Code]....
The parameters UserName, FirstName and LastName are column names from the sqldatasource.
i hav one data table in which some decimal values are up 6 decimal places.. im trying to bind that Data table to DataGridView while binding i want to round decimal values up to two decimal palces here is my code
dt.Columns.Add("Orderid", typeof(string));
dt.Columns.Add("tagnumber", typeof(string));
dt.Columns.Add("Minimum Value", typeof(string));
dt.Columns.Add("Maximum Value", typeof(string));
int count = ds.Tables[0].Rows.Count;
for (int i = 0; i < count; i++)
[code]...
hows hould i round up while binding..?
I was read your post: "Export GridView to Excel in ASP.Net with Formatting using C#" and is very useful. That code works perfect. But I need create a new format for a specific column in my sheet before to export it. For example:My DataTable have a column with decimal numbers and I'm trying reduce the tenths for each number.I want this: 2,874444 ----> 2,87 for a specific range. In this case I need it for all numbers in the column 13 or well said for the Column called N in Excel. Only reduce two tenths.
I used:
xlWorkSheet.Range["N"+h,"N"+h].NumberFormat = "0.00";
And no works (h is for rows, N is the column. Into a foreach).
Please try to guide me how to achieve this one. my application need to do reading the PDF document and want to store the values in Database.Actually what happens is my customers sends me the OCR scanned copied in the form of PDF file. i need to read those scanned pdf files and store the customer information into my table.
View 1 RepliesI know you've heard these questions, one million of times:1) I have a profile page with firstName, lastName, address1, address2, etc. and county as a 3 chars countryID, like USA for United States, GBR for Great Britain, etc. How do I connect the countries table (contains countryID and countryName columns) to display United States instead of USA? Of course I also need to update it selecting a country name (not ID) ?2) What will happen when I will need to give the page a more attractive look? Is this DetailView easily convertible in plain HTML form?
View 12 RepliesI WANT to make a signup with the help of Detailview....I also want to add a captcha control in detail view to stop spamming...
View 4 RepliesI want to retrieve and store(in an array) all the row values of a particular column in a gridview..i.e,if I have gridview with columns col1,col2 and col3, I want to retrieve rows of col1 by specifying col1..And,store all the rows in an array
View 4 Repliesi'm tring to make my detail view to update
i have a update button , once i click it , i can update my data from the detailview
but its not working at all for some reason
[code]....
how to delete from detailview without using datasource?
And it also doesnt work using sql datasource .
I'm trying to link a detailview to a gridview. Both are using the same datasource control and it's coming from an Access database. Both are showing data. The gridview is listing products fine and the detailview is listing details of some default product (maybe the first). How can I configure the two so that when I hit my select button on my gridview that it populates the details into detailview with the correct data for the selected product?
View 1 RepliesI use detailview control for edit all data in page but when i save data and i need save current username it's not save.
Now 1. I'm try use <asp:Parameter Name="<%$ Page.User.Identity.Name %>" Type="String" /> but not work.
2. I'm try use find control in codebehind and fill data to label in detailview but not work.
Below is my code.
[Code]....
I have a gridview and detailview in an updatepanel. My detailview is setup to display the details of a record that is selected in the gridview. When I edit the values in the detailview and click update it does not update the gridview. If I check my database the values have been changed it just haven't been updated in my gridview. Below is my code for the two objects and their datasources.
<asp:GridView ID="GridView1" runat="server" AllowPaging="True"
AutoGenerateColumns="False" DataSourceID="RCR_DSM" AllowSorting="True"
DataKeyNames="PartNumber" AutoGenerateSelectButton="True">
<Columns>
[Code]....
I am currently working on a project now, i have created a web form and successfully stored the data when the user fills in the textfield, dropdownlist and radiobutton and clicks on the submit button. Now, i need to show the lastest data entry in a detailview in a new page when the user clicks the submit button. Is this posible? How should i go about it? Or is there any other way for i did not use a gridview for users to enter their information.
View 5 RepliesI am using a DetailsView control to allow for updating a user record. Is there a way to check if the values are actually updated/changed when the update link is clicked. I know there are users, who would click the update button rather than the "Canel" even if there are no changes to the record. So, how do I check if any value has been updated when the update link is clicked. The DetailsView uses a SqlDataSource to populate the DetailsView.
View 4 RepliesI would like to know how to use the generatedimage control in a detailview to resize images using VB
View 4 RepliesUsing SQL and C#. I have a gridview with a template field. I need to modify the some items in the gridview when the user selects a given record and store the values back in the database. ProjectID is the unique key in the database.Gridview is done as a table. How can I do it? Here is my grid view implementation.
[Code]....
I want to calculate the service tax on some amount. The value of service tax must be taken from textbox1.text and amount from textbox2.text and then after calculating it must be store in another textbox say,textbox3.text
service tax = textbox1.text - 14.5%amount = textbox2.text - 44000total amount= textbox3.text -((14.5*44000)/100 )+ 44000 ;
The Value of ((14.5*44000)/100 )+ 44000 after calculating will be store in textbox3.text
I'm trying to change a row in detailsview based on a value in a coloum. Exactly the same as this example but in Detailsview: [URL]
View 3 RepliesI am doing the music store tutorial, and I discovered a problem, I don't know how to solve this. I am in Argentina, and our decimals have this format: '0.000,00' instead of the american format: '0,000.00'. I add the:
[Code]....
But now in the form when I write a number in this format '00,00' It shows me the message "Price must be between 0.01 and 100.00", but if I change that number to one in the '00.00' format, the client validator is hidden and It allows me to save, but then the server validation returns the following message: "The value '34.34' is not valid for Price." Cause when trying to save It must be waiting for a 00,00 formatted number. So...
I want to display image in detailview.. I used image datatype in the database instead of using varbinary. but the problem is.. detail view is not fetching the picture..
how i display the picture of datatype image.
i have textbox it should accept only integer or float values..........
View 1 RepliesI searched a lot of threads but still couldn't get my problem fixed. I have to update the "regform" table with two fields: session_ and session2. These two fields are inside the detailview edititem template which bounded to dropdown list drpsession1, drpsession2 separately. I wanted to pass the update parameters to the update sql UPDATE dbo.regform SET session_=@session_, session2=@session2 where id=@id
the @session_ is bounded to a drpsession1 and @session2 is bounded to drpsession2. I used
ControlID="ctl00$ContentPlaceHolder1$DetailsView1$drpsession1" to access the dropdown list within the detailview, but still couldn't do the updates. What's wrong with my code? Do I have to use the code behind to specify the update parameters? and How to do it? TIA.
<
"
asp:DetailsView
ID="DetailsView1"
runat="server"
AutoGenerateRows="False"
DataSourceID="SqlDataSource2"
Height="50px"
Width="544px"
DataKeyNames="id"
ondatabound="DetailsView1_DataBound">
<Fields>
<
asp:TemplateField
HeaderText="Session -Part I"
SortExpression="session_">
<
EditItemTemplate>
<asp:DropDownList
ID="drpsession1"
runat="server"
DataSourceID="SqlDataSource3"
DataTextField="session_time"
DataValueField="session_id"
SelectedValue='<%# Bind("session_") %>'
AppendDataBoundItems="True"
Width="229px">
<asp:ListItem
Text="Please select"
Value="-1"
/>
</asp:DropDownList>
<asp:SqlDataSource
ID="SqlDataSource3"
runat="server"
ConnectionString="<%$ ConnectionStrings:Connstr %>"
SelectCommand="SELECT dbo.sessions.* FROM dbo.sessions"></asp:SqlDataSource>
</EditItemTemplate>
<
asp:TemplateField
HeaderText="Session - Part II"
SortExpression="session2">
<EditItemTemplate>
<asp:DropDownList
ID="drpsession2"
runat="server"
DataSourceID="SqlDataSource4"
DataTextField="session_time"
DataValueField="session_id"
SelectedValue='<%# Bind("session2") %>'
AppendDataBoundItems="True"
Width="234px">
<asp:ListItem
Text="Please select"
Value="-1"
/>
</asp:DropDownList>
<asp:SqlDataSource
ID="SqlDataSource4"
runat="server"
ConnectionString="<%$ ConnectionStrings:Connstr %>"
SelectCommand="SELECT dbo.sessions2.* FROM dbo.sessions2">
</asp:SqlDataSource>
</EditItemTemplate>
</Fields>
</asp:DetailsView>
<
asp:SqlDataSource
ID="SqlDataSource2"
runat="server"
ConnectionString="<%$ ConnectionStrings:Connstr %>"
UpdateCommand
where regform.id=@id">
="UPDATE dbo.regform SET session_=@session_, session2=@session2 where id=@id">
<UpdateParameters>
<asp:ControlParameter
ControlID="ctl00$ContentPlaceHolder1$DetailsView1$drpsession1"
Name="session_"
PropertyName="SelectedValue"
Type="String"
/>
<asp:ControlParameter
ControlID="ctl00$ContentPlaceHolder1$DetailsView1$drpsession2"
Name="session2"
PropertyName="SelectedValue"
Type="String"
/>
<asp:ControlParameter
ControlID="DetailsView1"
Name="id"
PropertyName="SelectedValue"
/>
</UpdateParameters>
</asp:SqlDataSource>