Get The Exact Raw URL In IIS 7.0 Integrated Mode .NET 4.0

Nov 1, 2010

After some changes in web.config now IIS allows characters like ":" in URL but it makes some modifications. For example:

http://localhost/a///b => http://localhost/a/b (remove all slashes but one)
http://localhost/a => http://localhost/a/b (changes backslash with slash)
...
I want URL string from within a HttpHandler (I use Request.RawUrl) as it is without any change.

View 1 Replies


Similar Messages:

Code To Check For Integrated Pipeline Mode?

May 3, 2010

I am looking for code to upload to a shared web host that will return whether or not the web site is running in integrated pipeline mode.

View 1 Replies

Getting Error - This Operation Requires IIS Integrated Pipeline Mode

Dec 14, 2010

I am using the following code for URL RewritePath

[code]....

but its giving the following error

CurrentNotification = 'System.Web.HttpContext.Current.CurrentNotification' threw an exception of type 'System.PlatformNotSupportedException'
base {System.NotSupportedException} = {"This operation requires IIS integrated pipeline mode."}
}
}

View 10 Replies

IIS7 Integrated Pipeline Mode Slower Than Classic?

Sep 20, 2010

we are running a complex 64-bit ASP.NET 2.0 application on W2008 R2 Standard and stress tests done with VS2008 Team System have indicated that integrated pipeline mode is 30% slower than classic mode.

We have compared the application traces extensively and it appears that integrated mode is uniformly slower than classic. That is, there is no single point that causes delays in integrated mode.

This is quite the opposite to everything Microsoft says about the integrated pipeline, so it might be that there is something quite wrong with the configuration of the integrated mode or the server. But we have not found any settings that would have any effect on this. Some complaints that Sharepoint and reporting services are slower in integrated mode can be found, but our application does not use them so this is quite likely unrelated.

View 2 Replies

Check If Our Code Is Executing In Integrated Pipeline Mode Or Not?

May 3, 2010

Is it possible to check if our code is executing in Integrated Pipeline Mode or not?

There are some ASP.NET class properties that only work in Integrated Pipeline Mode, and I want to avoid raising an exception if there is a way to test if our code is executing in that environment or not.

View 1 Replies

C# - How To Programatically Detect If Application Is Running In IIS 7.0 Integrated Mode From Within .NET Page

Aug 26, 2010

Generally we should have control of our AppPools and be able to force the Managed Pipeline Mode. In my case I don't have control and would like to implement the code behind code a little differently based on the Managed Pipeline Mode (Integrated vs Classic). I just don't know how to detect this. Is there a simple way to do it from within the code behind page?

View 1 Replies

SQL Reporting :: ReportViewer Control Version 8.0 Compatible With Integrated Mode Of IIS 7?

Dec 7, 2010

Ultimately, we need to know if version 8.0 of the .net Sql ReportViewer control is compatible with IIS7 running in Integrated Pipeline Mode.Regardless of the countless forum posts and articles we've read and suggestions we've tried, we've been unable to get this combination to work.

We're in the process of upgrading our websites. We're having trouble with using the 8.0 version of the ReportViewer control with IIS 7 in Integrated mode. Below is a summary of our previous setup and what we're attempting to upgrade/change to.

Our previous setup:IIS 7 Classic Pipeline Mode.Net Framework 3.5 ReportViewer 8.0 Local Mode (control used within websites - no separate Sql Reporting Server)

Attempting to upgrade to IIS 7 Integrated Pipeline Mode.Net Framework 4.0 ReportViewer 8.0 Local Mode - NO CHANGE

Our sites are all working fine except for the use of the ReportViewer control. We're not ready to upgrade our reports to version 10.0 so we wanted to continue using version 8.0.

Since we're now using the Integrated pipeline mode of IIS7, we changed our root level web.config files of our websites to contain the handler for the report viewer in the system.webServer/handlers section instead of the system.web/httpHandlers section.We're receiving the following error when attempting to access a page that contains the ReportViewer control,

Microsoft.Reporting.WebForms.ReportViewerHandlerNotRegisteredException: The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type

"Microsoft.Reporting.WebForms.HttpHandler,

Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral,

PublicKeyToken=b03f5f7f11d50a3a" /> to the system.web/httpHandlers section of the web.config file.We can't add the handler to the system.web/httpHandlers section of the web.config file since we're running in IIS7 Integrated Pipeline Mode.

We've tried both manually modifying the web.config file to include the handler in the system.webServer/handlers section as well as adding it via IIS. Both methods produce the same result.So, is version 8.0 of the ReportViewer control not compatible with IIS7 in Integrated Pipeline Mode? If it is compatible, what are we doing wrong? If it is not compatible, is version 9.0 of the ReportViewer control compatible?Here are the pertinent sections of our web.config files:

[Code]....

View 1 Replies

Configuration :: Global.Application_BeginRequest() Not Processed In IIS7 Integrated Mode?

Dec 8, 2010

I fill a third-pard component variable in Global.Application_BeginRequest(). Everything is fine until I set IIS7 into the Integrated mode. In that case the method Application_BeginRequest() is not called (Application_Start is ok).May be some module is registered wrong?(I have found a same problem here on forum, but without a solution:[URL]

View 1 Replies

HttpContext.Current Doesn't Exist In IIS7 Integrated Mode?

Sep 16, 2010

I just switched from Classic Mode to Integrated Mode and now HttpContext doesn't seem to exist in my ASP.NET application. I can't even add a Watch to HttpContext nor to HttpContext.Current.

I'm using FluorineFX where in the Web.config a HttpModule is defined. Apparently, in IIS7 Integrated Mode, these HttpModules need to be added to the Modules section in System.WebServer. I have done this, but now I'm having this HttpContext problem...

Code is in a simple service class being called by Flex (amf).

if (HttpContext.Current.User.Identity != null)
{
...
Web.Config (I don't know how to display this properly in Stack...):
<?xml version="1.0" encoding="utf-8" ?>

[Code]....

View 1 Replies

HttpHandlers / Modules :: HttpModule Broken After Migration To IIS7 (integrated Mode)?

Jul 27, 2010

In IIS6 the scenario below is working perfectly.I have an HttpModule called URLRedirect which examines URLS and by using RegEx rewrites of applicable. An example is a URL "/doc47.pdf" gets redirected to docpdf.ashx?id=47 Then the docpdf.ashx used the id value and, using a database builds an application/pdf document and returns it. Since I need to validate that the user has access to the data, the first line of the ProcessRequest(HttpContext context) function is:if (context.User.Identity.IsAuthenticated) ..... This is where the problem occurs, but more details first.

On a webpage, access to which is restricted to lgged on users who meet certain criteria there is a link which allows the user to present the page as a PDF document. This is achieved by using javascript to open a popup window using the window.open("/doc47.pdf", ... ) function.This all works fine under IIS6 and under IIS7 if I change the mode to Classic. But, under IIS7 in integrated mode, the following happens.The line in doc.ashx described above raises an exception because context.User == null. But, and this is interesting, if instead of using the link that opens the popup window I instead type /doc.pdf?id=47 into the address bar, the PDF document displays correctly.So this indicates to me that the URLRedirect Module is somehow losing the logged on user information.

View 1 Replies

Visual Studio :: Debugging Global.asax Code In Integrated Mode?

Feb 21, 2011

migrating my ASP.NET project from IIS 6 to IIS 7.5 I came across an issue with the Managed Pipeline Mode set to 'Integrated'.I have a Global.asax file in my web root to initialize some objects, gather data etc., however I am not able to hit breakpoints in the associated code-behind file (VS 2008). The code is executing very well (as I can tell from Eventlog), but I want to step into all that initializing there and need to have the debugger attached properly.Everything is working as expected in Classic pipeline mode. Since I'd like to benefit from Integrated Mode features in the future I wonder if I have to give up the ability to debug my Application start and error events...

View 1 Replies

Duplicating Controls - Add Exact Duplicate Of Panel On Bottom Of Page With Exact Functionality

Jan 18, 2010

if there is anyway that I could duplicate controls in a asp.net pages. So for example, currently for one of my pages, I have a panel at the top of the page with alot of controls in them ( eg next/previous buttons, labels, trees, etc). However I wanted to add the exact duplicate of this panel on the bottom of the page aswell, with exact functionality.

View 2 Replies

Http Error 500.24 - Net Setting Has Been Detected That Does Not Apply In Integrated Managed PipeLine Mode

Aug 16, 2010

I try to install IIS 7 on my Win 7, whenever I check . Net Extensibility . AsP .net under Application Development Feature and run http://localhost I get http error 500.24. An asp .net setting has been detected that does not apply in Integrated managed pipeLine mode

View 1 Replies

HttpHandlers / Modules :: Trying To Write An HttpModule That Will Work In IIS7 With Integrated Pipeline Mode AppPool?

Jan 2, 2011

am trying to write an HttpModule that will work in IIS7 with integrated pipeline mode AppPool. Within this module I need to access Session variables and to be able to capture the Session Start and End events. I have found a couple of articles on this topic that indicate the need to modify the behavior of the HttpHandler in PostAcquireRequestState to force the Session for the context to be initialized. The article I am using as a template is posted here:[URL]In my case I am getting the following error:

[NullReferenceException: Object reference not set to an instance of an object.] System.Web.PipelineModuleStepContainer.GetEventCount(RequestNotification notification, Boolean isPostEvent) +30 System.Web.PipelineStepManager.ResumeSteps(Exception error) +1112
System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) +113 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +616

I believe that this error implies a problem with attempting to attach an event handler multiple times. I am aware that the modules Init function can be called more than once and have set a static initialization flag which ensures that I will only ever attach the event handler once.In the most condensed form my code is as follows:

public class HttpModule : IHttpModule, IRequiresSessionState

View 1 Replies

IIS Configuration :: HTTP Error 500.23 Setting Detected That Does Not Apply In Integrated Managed Pipeline Mode

May 7, 2015

I am trying to export crystal report to pdf inĀ asp.net, though the code is working well on localhost but on server I get error

HTTP Error 500.23 - Internal Server ErrorAn ASP.Net setting detected that does not apply in Integrated managed pipeline mode.

The crystal report is showing abnormal behaviors.I am using a CrystalReportViewer on which i have set the CrystalReportSource1 using the viewer Tasks.

The code on page load is :-

cn.Open();
DataSet ds = new DataSet();
string sql = "select * from Test";
OleDbDataAdapter da = new OleDbDataAdapter(sql, cn);
da.Fill(ds);

[Code].....

During the troubleshooting i encountered another unusual issue, where i tried a new crystal report with just simple report. That simple crystal report is not showing data & the toolbar images are not rendered. I googled on this but didn't found conclusive thing.

View 1 Replies

.net - Iis 7 And .net Framework 4.0 Beta 2 / Get The HTTP 500.22 Error When Using The 4.0 As Application Pool And "Integrated" In "Managed Pipeline Mode

Feb 7, 2010

I am trying to get a asp.net 4.0 beta 2. website running that is working on my dev machine, but not when I published to my server. Where I get the HTTP 500.22 error when using the 4.0 as application pool and "Integrated" in "Managed Pipeline Mode".

View 1 Replies

MVC :: Login Page In App Hosted On IIS 7 Integrated Mode - Its Never Getting Redirected To The Home Screen Or Invalid Login Screen

May 19, 2010

I have created my first MVC application. I am using forms authenticataion. I have created a custom action filter MyAppAuthorizationFilter which inherits from AuthorizeFilter. Inside this filter I'm authenticating the user credentials by checking them against a database table (by overriding OnAuthorize method). If the user is not authenticated, I am redirecting the users to a login page (which is view of LoginController). I am using this filter agaginst my main controller so that all actions in this filter will execute only if the user is authenticated.

I do not have any problem when I use the asp.net development server (shipped with Visual Studio). But when I deploy the app to our IIS7 server, I can see the login screen when I access the default url, but after entering the credentials (both correct and incorrect) and posting back the Login page, it stays on the Login page (clears the pwd, but not the username). Its never getting redirected to the home screen or invalid login screen.

IIS 7 server has .net framework 3.5SP1, but no MVC. So I deployed the System.Web.Mvc dll in the bin folder.

Here's my Code (I've omitted the views and models as they are not needed here):

[MyAppAuthorizationFilter]
public class MainController : Controller
{
//
// GET: / [code]......

View 2 Replies

MVC :: Mixing Webforms - "HTTP Error 500.22 - Internal Server Error An ASP.NET Setting Has Been Detected That Does Not Apply In Integrated Managed Pipeline Mode"

Jun 30, 2010

I have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.

[Code]....

When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.

View 1 Replies

How To Hide Exact URL In 3.5

Mar 25, 2011

I have a website created using ASP.Net 3.5, C#, VS 2008. It's URL is [URL] and it has SSL certificate installed. My default page is welcome.aspx.

Now anyone types the URL [URL]in address bar it will be redirected to[URL]But I don't want to show the welcome.aspx in the address bar URL. Just I need only [URL] .

View 2 Replies

Regular Expression For Exact Match

Mar 16, 2011

I am reading .css fle which is having following 2 css classes:

[code]....

View 11 Replies

Unable To Figure Out Exact Time

Apr 5, 2010

I have sesssion time out issue. Mine is a very big application and 10 yrs old application, so I m unable to figure it out. I have these timeouts in my web.config file. Session is getting expired in 2-3 min or sometimes I m unable to figure the exact time. Here is my timeout sessions in web.config file

<httpRuntime maxRequestLength="102400" executionTimeout="360"/>
<sessionState mode="StateServer" stateConnectionString=" something" cookieless="false" stateNetworkTimeout="30" timeout="30"/>

View 7 Replies

Web Forms :: How To Get Exact Path From FileUploadControl

Jan 20, 2011

I want to upload an XML file and after that i've to load it by using XMLDocument and do some changes, then save XML file back to same location where actually l uploaded. But whenever i'm loading XML file and written code for finding path is like..

string path=Path.GetFullPath(FileUpload1.FileName);
but it return path like.. "C:\Users\nagaraju\VegaFIXSettings.xml"
but actually i'm uploading XML file from D:\VegaFIXSettings.xml

how to get actual path when uploading file by using FileUploadControl.

View 3 Replies

C# - In Visual Studio 2005 Build Mode Drop Down, Release Mode Not Shown

Sep 15, 2010

I got a project when after opening in visual studio 2005 in build mode drop down, only debug mode is shown but release mode not shown.Project builds successfully in debug mode is there a way to enable release mode.

View 1 Replies

Forms Data Controls :: Necessary To Add Mode Changing And Mode Changed In The Back Code

Mar 7, 2011

gaining mode changing for formview in VB.The problem is that, the current mode im using was ReadOnly, and i want to add some button so thatit could connect to Edit mode in the same formview.Is it necessary to add modechanging and modechanged in the back code?

View 2 Replies

C# - What Is The Difference Between Debug Mode And Release Mode In Visual Studio 2010

Mar 17, 2011

Possible Duplicates: Debug/Release difference Performance differences between debug and release builds

What exactly is the different in compiling and running an asp.net/c# project in Debug mode VS Release Mode?

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved