I'm using VS 2008 and have a web site that I am trying to perform a build on. When I attempt this, I get the error "This application is already precompiled" in the Error List. What causes this and how do I rectify it?
View 6 RepliesI have a webapplication that uses a master page. When I publish the site in vs2010 (running framework 4), and then I navigate to the default.aspx page I get a parser error that the masterpage's codebehind file does not exist.
I know that a website can be precompiled and then deployed which means there would never be anything that IIS needs to parse. The above error therefore implies that IIS is still trying to compile my precompiled site.
Is there something that needs to be configured to stop the web application from doing this?
I have a VS2008 Web Application project that is being pre-compiled without being updatable. When I try to load a page that should display an RDLC report using the ReportViewer, it just displays an empty page. It works fine in a non-precompiled version. What could be the problem?
View 1 RepliesI created an ASP.NET REST service (using WCF) and access it through one of my .aspx page. the problem is that when I publish (precomile) my code to the web server, I get an error :
"ThunServ not defined" in the Javascript console of my browser.
don't know what's causing it and how to solve it.
I currently use Visual Studio 2010 and .NET Framework 4.0. I have been precompiling my site regularly for several years before uploading to our production or distribution server, using aspnet_compiler.exe, and have had no problems. When I tried to precompile and upload a few days ago, I got the following error message when I try to acccess one particular page (the rest of the site works fine):
The file '/Library/LibraryHome.aspx' has not been pre-compiled, and cannot be requested. The only significant change from the previous time I precompiled was that I had installed the AJAX Extensions and tried to use one of the controls on a page in the /Library folder (not LibraryHome.aspx but a different page). I eventually gave up on that control and removed it from the page, so there is no AJAX in the site.
I read in various forum posts regarding this error that it often occurs when one or more assemblies are missing when the site is uploaded. When I precompile, I completely empty the folder that it's going to compile into, and then when I upload the site to our production server, I delete everything in that folder also. I cannot find any assemblies that are missing. Everything in the bin folder of my local version of the site exists in the bin folder of the compiled version. I even uninstalled the AJAX Extensions, but nothing I've done removes this error message. I've checked the listing of assemblies in web.config and don't see anything it's calling for that isn't in the compiled site.
I have a precompiled file done by some other person. I need to make some changes to the code. However when I open the folder on asp.net, the pages display as aspx pages only with no cs or vb files. how can I approach the code behind files in those aspx pages.
View 4 RepliesI am working with a precompiled ASP.net website. I have most of the *.aspx.vb files, but I am missing some of the library files, and only have the DLLs. Can I still selectively compile aspx.vb files? When I just hit build, It errors with 'This application is already precompiled'
View 1 Replieswe have an application in production and the code is in Pre-Compiled form. The developer who developed that application left the company and we don't have any backup of source code. the only access we have is Pre Compiled code in the server. We need to fix the issues in the application now.Is there any way to Decompile (extract to actual source code) the PreCompiled code ?
View 3 Repliesi have developed a web site first time when i build and publish web site i got precompiled pages..
but when i have made few changes on that n again try to publish it not giving pre compiled pages at destination folder.
I have the compiled output from a site which uses asp precompilation. The .aspx files are just a placeholder and there are .compiled files for each .aspx. I'm trying to reconstruct a site's .aspx files from the precompiled assemblies. I've looked in the compiled assemblies using reflector but reconstructing the .aspx looks like a bigger task than what I was hoping for. I have a relatively short timeframe for this.Does anyone know of any easy way? Are there any tools out there that can acheive this task?
View 1 RepliesI just published my website to my webhost, and for some reason it's giving me errors. So I copied the solution and it works correctly.
What could the problem be? I think a possible problem may be that there's a process that creates a directory so it can copy files. By copying everything from the solution to the ftp, everything works correctly. If I publish the site, it somehow does not create the directories.
Is there something I'm not doing correctly? I've published in a local folder, and then copied to the FTP. I've also published directly to the FTP. Neither of them work.
I have a folder that contains ASPX code and it's codebehind (C#) as well as a solution file. The compiled version of the application resides in the inetpub directory. Whenever I open the solution in Visual Studio, VS warns me that it is attempting to open a precompiled website and asks me if I want to continue. If I click NO it does nothing, but If I click yes it shows me the ASPX files in the inetpub directory. How do I make the solution work with that code in the directory that it is in (ie with the aspx and codebehind)?
View 2 RepliesGenerating code behind files from precompiled 2.0 Website
View 2 RepliesI have a simple website developed on vwd2008express edition .
I have precompiled the site and have all compiled files in a folder.
how to go abt deploying these files on iis.
I have a precompiled website deployed in a remote test server. I want to debug the site from my computer. Following page says that the compilation should be performed with symbolic information.
[URL]
I had compiled my application in debug mode.
Unfortunately the breakpoints are not hit even with a copy of the precompiled website deployed in my local IIS. Following were the actions done with the local copy.
1. Requested the Page
2. Opened the source code and attached visual studio to aspnet_wp.exe
3. No break points are hit( I can see visual studio giving the hint- The breakpoint will not currently be hit. No symbols have been loaded for this document.)
I sent a lot of time trying to trouble shoot IIS 6.0 yesterday on a pre-compiled website. I could never browse the default web page. I got the initial bar on the bottom right when I set up the site but then got a blank page. The I got frustrated with IIS and decided to try just copying all my web application files to the IIS server. When I did this the application worked! I have used pre-compiled sites before with no problem.
View 2 Replieswhile i was trying to add my aspx pages(framework2.0) to a html precompiled website,
i get the following error
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. correct the error and then click the
Refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'file:///D:/Site/Login.aspx'. Line 1, Position 2
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="_Default" %>
-^
here is my source code-
The XML page cannot be displayed Cannot view XML input using XSL style sheet.
I have my website which is deployed in precompiled mode but I would like to know if there where any possiblity so I could republish a single precompiled page instead of the whole wbesite all over again (and this just for one little modification) ? If not, would it be more suitable if I did not use precompiled website for the deployment?
View 1 Replies{
"error": {
"message": "Error validating application. Invalid application ID.",
"type": "OAuthException",
"code": 101
}
}
I know that ASP.NET MVC has error filter attribute to handle specified error type. However, this feature cannot catch any error that occurs when application start. Therefore, I need to add some code to "Application_Error" method for handling this error like the following code.
public void Application_Error(object sender, EventArgs e)
{// At this point we have information about the error
var ctx = HttpContext.Current;
var exception = ctx.Server.GetLastError();
[code]...
I am getting the error from ur sample codeError validating application. Invalid application ID.",
"type": "OAuthException",
"code": 101
though i have added app domain name as "localhost.com"and site url as "Http//localhost.com:port_Number"/.
i have classes of my web application only the default one work if i for example click a link to go to another class i get this error for each class this happens . But only on the web server WHy ?
Server Error in '/' Application.
Parser Error
Description:An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'WebApplication2.Login2'.
Source Error:[Code]....
Line 1: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Login2.aspx.cs" Inherits="WebApplication2.Login2" %>Line 2: Line 3:
Source File: /Login2.aspx Line: 1
im working with visualstudio 2005 and sql server 2005 c#,and i tried to insert an items to the sql but it gave me this error
Application server error '/ WebSite6'.
The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students".The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.
The statement has been terminated.Description: The exception is unhandled occurred during the implementation of the current web request. the stack trace for more information about the error and where the source code.
Details exception: System.Data.SqlClient.SqlException: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_StudentToCourse_Students". The conflict occurred in database "TopseaUser", table "dbo.Students", column 'id'.The statement has been terminated.
This error: Line 243: sql_comm.Parameters.AddWithValue ("@ studentId", Convert.ToInt32 (id));
Line 244: sql_comm.Parameters.AddWithValue ("@ CourseId", Convert.ToInt32 (ListBox3.Items [j]. Text.ToString
()));
Line 245: sql_comm.ExecuteNonQuery ();
Line 246: split_listbox2 ();
Line 247: sql_conn.Close ();
Source File: c: Documents and Settings Ronen My Documents Visual Studio 2005 WebSites WebSite6 SiteMembers CourseSignUp.aspx.cs line: 245
this it the code :[Code].... !
I have uploaded all files to my server. and while im checking the site it shows the following error." Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster,ensure that <machineKey> configuration specifies the same validationKey"what i have to do/how to fix it.
View 3 RepliesI have hosted a service in the IIS server, while consuming the service i am getting some error. I have mentioned the error code below.
Error code:
Server Error in '/' Application.
The type 'EchoTunnelService.EchoService', provided as the Service attribute value in the ServiceHost directive could not be found.
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: The type 'EchoTunnelService.EchoService', provided as the Service attribute value in the ServiceHost directive could not be found.
Source Error: [Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3614