Gridview - Adding Column Of Checkbox To Its Header
Jul 22, 2011
I edited my gridview template by adding an additional column of checkbox and to its header
I managed to do a checkchange for select all or none and for selecting single of multiple checkbox.
My problem here is that when I try to select all, uncheck another checkbox, the header checkbox is still checked and the unchecked checkbox becomes checked again.
If i did not check my header checkbox and just check it normally, its fine.
View 7 Replies
Similar Messages:
Aug 20, 2010
I want to select all checkBox in Gridview when click to header checkBox.I have created design such that CheckBox is not available to header of Gridview.It is in other table. Below is design of gridview.
[Code]....
View 9 Replies
Jan 21, 2010
Scenario:
I have a Gridview where I want to handle the Sorting in a custom control that I've added to the header.
I've added this control to my GridView's Header via OnRowCreate event handling. I want the Sort Expressions to persist session to session (via Webparts Personalization)
Here is what I have for adding the custom header control to the GridView Header
[Code]....
This works out well for adding the control, but I can't get anything to persist because these controls are creating initially via postback (per the event) and re-created on all subsequent postbacks. I can't add an If(!IsPostback) because the controls are initially created on the gridview's postback (well at least thats how it's acting when I put it in there) If I were to add this control via the ASP page, not via the Codebehind, I would be able to persist the control. If I try to treat it as though everything is setup correctly, and assign my custom control's controls to [Personalizable], I get a runtime error telling me that I can only have webpartzones in or before Page_init (I'm guessing this is due to when/where the
gridview hits the OnRowCreate event). If there is some fundimental logic I'm missing, or best practices that I'm moving away from,
View 1 Replies
Nov 28, 2010
is there anyway i can add in the gridview in header column name a button instead of label ?
column name 1 column name 2 column name 3 button
i am using checkbox column in item template for the button ,i wish after selecting checkbox for some row to click on the button on the header !!
View 2 Replies
May 7, 2015
How to pass gridview particular column values to another page's table header...
View 1 Replies
Jun 29, 2010
I am dynamically binding a typed list to a GridView control.
The Grid View Control is in an asp.net page that is wrapped in an asp:UpdatePanel (Ajax).
The first column contains a checkbox control.
Only one checkbox may be checked in this column.
If the user checks a checkbox, all other checkbox must be unchecked.
I am trying to achieve this using client-side script without success.
In the handler for the GridView's RowDatabound event, have attempted to add an attribute to the CheckBox contained within the cell.
[code]....
View 2 Replies
Apr 6, 2010
I have a gridview which displays following columns:
TaskID, TaskDescription, IsComplete, DateOfCompletion
Now what I want to achieve is, when user clicks IsComplete checkbox, she must enter the date of completion. So, I want a validation (client side) on DateOfCompletion if the checkbox is selected (checked). And, I also want to use Validator Callout Extender
if possible.
How can I achieve this?
View 2 Replies
Sep 24, 2010
I wnat to have checkbox in Gridview Header. On the checkbox changed I wnat to check and uncheck all the checkboxes of the Gridview Rows. Currently I am doing it on the button click. But I want to have checkbox in Gridview header, How to have checkbox in Gridview Header,can somebody tell me??
protected void btnCheckAll_Click(object sender, EventArgs e)
{
Check_Uncheck_Checkboxes(true);
}
protected void btnunCheckAll_Click(object sender, EventArgs e)
{
Check_Uncheck_Checkboxes(false);
}
private void Check_Uncheck_Checkboxes(bool bState)
{
CheckBox chk;
foreach (GridViewRow rowItem in GrdCompanies.Rows)
{
chk = (CheckBox)(rowItem.Cells[1].FindControl("chkSelect"));
chk.Checked = bState;
}
}
View 2 Replies
Aug 1, 2010
I have a gridview which includes a column of checkboxes down the left side, inserted using <asp:TemplateField>. Currently I can check / uncheck the checkboxes against particular records, to select the records I want to apply changes to.
My question is, how can I add a "master" checkbox into the gridview header, to toggle all of the checkboxes together? I would like to be able to use this to check / un-check all the checkboxes together.
View 10 Replies
Sep 22, 2010
I have creted a checkbox for each column of grid at the top of the header in row created event. I need to check wheather checkbox is checked after button click event.
//Build custom header.
GridView oGridView = (GridView)sender;
GridViewRow oGridViewRow = new GridViewRow(0, 0, DataControlRowType.Header, DataControlRowState.Insert);
TableCell oTableCell = new TableCell();
//Add Staff_ID
CheckBox chkStaffID = new CheckBox();
chkStaffID.ID = "chkStaff_ID";
chkStaffID.Text = "Hide";
chkStaffID.CheckedChanged += new System.EventHandler(chkStaffID_CheckedChanged);
chkStaffID.AutoPostBack = true;
oTableCell.Controls.Add(chkStaffID);
oTableCell.ColumnSpan = 1;
oGridViewRow.Cells.Add(oTableCell);
Once i select the checkbox on different columns then after firing the button click event i want to get which checkbox is check and unchecked.
View 2 Replies
Jul 24, 2014
I placed an Excel image in a header column on a Gridview. I want to allow the user the ability to click the icon and export the content of the Gridview to an Excel spreadsheet. How do I make the image an active link, so it will fire an event to access my code for the export.
Code:
<Columns>
<asp:TemplateField ItemStyle-Width="85" ItemStyle-Wrap="False" HeaderImageUrl="~/Images/excel.png" HeaderText="Export" >
View 1 Replies
Nov 11, 2010
I need to add a checkbox column to my data and do it programmatically. I've seen a lot of other posts that address this, but can't get it to work in VB.
[Code]....
View 4 Replies
Nov 16, 2010
I want to set header column width for grid view. I tried HeaderStyle-Width="30px". But it is depending on Item columns. The column width is setting based on item value. But I want fixed width even if it has value or empty.
View 1 Replies
Mar 22, 2011
I have a CheckBoxList that is showing all A table C column.
SELECT DISTINCT C
FROM A
ORDER BY C
My A table has two columns.
B-->Primary Key
C--> Every C has a unique B.
I have an SQL like this for my Gridview Source;
Select <...............>
From <..................>
Where <.................>
AND A.B IN
(Select A.B
From A
Where A.C IN ALL CheckBoxList.SelectedItem.Value)
Something like that. My SQL syntax isn't very good. I hope you can tell what I want..
What I REALLY want is, when I click a button, Gridview should be populated according to the SQL , BUT filtered by what is selected in CheckBoxList.
Is there any way to add a parameter in the SQL IN clause?
View 2 Replies
Mar 24, 2011
I have searched all over the internet and there are just too many solutions that basically is not working for me right now unfortunately. i just want to display my gridview header and I dont want to add a blank row in any form.
View 3 Replies
Oct 22, 2010
I'm having difficulty adding a repeating header row, every x rows, to a gridview. I'm able to add the header only once with the below code. For some reason it will only add it during the last iteration through the for/next statement. I tried manually adding three separate .addat statements to different rows and it only executed the last .addat statement. I couldn't find any information on why it's only working the one time and I hope someone has a fix or better solution.
Code snippet (Note the IsWhole() function verifies that the rownumber divided into a whole number):
Protected Sub Gridview1_DataBound(ByVal sender As Object, ByVal e As System.EventArgs) Handles Gridview.DataBound
Dim grid As GridView = TryCast(sender, GridView)
If grid IsNot Nothing Then
Dim row As New GridViewRow(0, -1, DataControlRowType.Header, DataControlRowState.Normal)
Dim header As GridViewRow = POSTURE_RESULT.HeaderRow
For i As Integer = 0 To POSTURE_RESULT.Columns.Count - 1
Dim TableCell As New TableHeaderCell()
TableCell.Text = header.Cells(i).Text
row.Cells.Add(TableCell)
Next
Dim t As Table = TryCast(grid.Controls(0), Table)
If t IsNot Nothing Then
For i As Integer = 0 To Gridview1.Rows.Count - 1
If IsWhole(i / 5) Then
t.Rows.AddAt(i, row)
End If
Next
End If
End If
End Sub
View 4 Replies
Dec 3, 2010
I need a textbox for each column of the header row of my Gridview. Then whatever I type in, say the first column is a Surname, the Gridview needs to be filtered by records with only that Surname.
View 3 Replies
Jan 20, 2010
what I am trying to do is add a method to my gridview's sorting event to add a class to the column being sorted so the user can know if the data is being sorted ascending or descending and on what column. I am currently trying to do it through a switch statement on the sort expression to determine what column it's coming from but I am unaware of how to set the css class.
View 1 Replies
Feb 1, 2011
iam using ASP gridview. And i declare one label in headertemplate for setting heading of a particular column. How can i dynamicallly change the header text on a particular button click..
View 2 Replies
Jan 26, 2015
I have a gridview which I am trying to be able to sort by clicking the column header. Currently, I have the column header underlined by turning the 'allow sorting' function to TRUE, but when I click the column header, it does nothing.
here is the code for the page:
Imports System.Data.SqlClient
Imports System.Data
Imports System.IO
Imports System.Collections.Generic
Imports System.Web.UI.WebControls
Partial Class Dashboard
Inherits SmartSessionPage
[Code] ....
View 1 Replies
May 29, 2012
how do i get the column header name when a user clicks on the header cell of gridview? either in javascript or on server side??
View 1 Replies
Jun 19, 2010
how to add checkbox column to gridview
foreach (GridViewRow objRow in GridView1.Rows)
{
TableCell tcCheckCell = new TableCell();
CheckBox chkCheckBox = new CheckBox();
tcCheckCell.Controls.Add(chkCheckBox);
objRow.Cells.Add( tcCheckCell);
}
how to add the objrow to gridview again
View 1 Replies
Mar 11, 2010
i have a problem with ListView control,when i bind data to it, it shows the heder of it also.
i don't want to show me the hedear, what should i do?
[Code]....
View 11 Replies
Jul 7, 2010
Dear all; I have the following gridview
Type Cost
BENZ 40,000
TOYOTA 20,000
Now, I would like a situation if either TYPE or Cost is clicked on, it would sort things in ascending order. see example below.
if Cost is clicked on, we will have the following sorting order.
Type Cost
TOYOTA 20,000
BENZ 40,000
I am still new to visual studio.net.
View 13 Replies
Apr 5, 2012
I want to change Gridview Header column names dynamically with if condition.
for example
IF condition 1
UserID | Full name | Transaction Amt | Tancaction Date
IF condition 2
UserID | Full Name | DOB | Balnace | Date
How to change Header column name for single Gridview dynamically ?
View 1 Replies
