C# - CheckBox Adding Parameter To Gridview?
Mar 22, 2011
I have a CheckBoxList that is showing all A table C column.
SELECT DISTINCT C
FROM A
ORDER BY C
My A table has two columns.
B-->Primary Key
C--> Every C has a unique B.
I have an SQL like this for my Gridview Source;
Select <...............>
From <..................>
Where <.................>
AND A.B IN
(Select A.B
From A
Where A.C IN ALL CheckBoxList.SelectedItem.Value)
Something like that. My SQL syntax isn't very good. I hope you can tell what I want..
What I REALLY want is, when I click a button, Gridview should be populated according to the SQL , BUT filtered by what is selected in CheckBoxList.
Is there any way to add a parameter in the SQL IN clause?
View 2 Replies
Similar Messages:
Mar 22, 2011
I have a [Code]....
with showing all A table C column.
[Code]....
My A table has two column.
B-->Primary Key
C--> Every C has a unique B.
I have an SQL like this for my Gridview Source;
[Code]....
Something like that. My SQL syntax isn't very well. I hope i can tell what i want..
What REALLY want is, When i click a button, showing in Gridview with second SQL , BUT only i selected in CheckBoxList.
Is there any way adding to parameter in SQL? How can i do that?
View 8 Replies
Jul 22, 2011
I edited my gridview template by adding an additional column of checkbox and to its header
I managed to do a checkchange for select all or none and for selecting single of multiple checkbox.
My problem here is that when I try to select all, uncheck another checkbox, the header checkbox is still checked and the unchecked checkbox becomes checked again.
If i did not check my header checkbox and just check it normally, its fine.
View 7 Replies
Dec 9, 2010
I have a gridview in my aspx page, which is filled with data from generic list.
I want to add a checkbox and a link button in the grid, so that users can select the row and when users click on the link button, a new page is loaded with the items in the selected row.
View 6 Replies
Jul 27, 2010
I am defininging all my sqldatasource select parameters upfront in the .aspx file. Then based on user filter choices, I modify the Select Command to include those parameters. Works fine, but when I add one of these parameters, the bound grid doesn't pull back any results. No error message is given.
If I remove the ToteID control parameter line below, everything works fine. But with it in, the SQLDataSource.Selecting event doesn't even fire.
[Code]....
[Code]....
View 7 Replies
Nov 12, 2010
I had problems with jQuery fancy checkbox plugin [URL]
However after that I want to "combine" 2 plugins, the one mentioned in first post:
[URL]
and this one ("Safari"):
[URL]
So I've changed the picture of checkbox and wanted to add hover effects as it is shown in second link (according to state of checkbox).
However since I'm quite noob with jQuery (and JS) the thing only works fine on "default" mode, when checkbox is not selected or checked on page load.
JS:
[Code]....
CSS:
[Code]....
View 14 Replies
Jan 5, 2011
I have a page on which everything is loaded dynamically.
There is a Gridview (AutoGenerateColumns=true) and in the RowDataBound I check every column for a boolean datatype. If found I add a checkbox (autopostback=true) to the cell and register the CheckedChanged event.
The problem is, that I only get the CheckedChanged event, if I reload the grid in Page_Load:
protected void Page_Load(object sender, EventArgs e) {
LoadGrid();
}
But this is very expensive and causes that the db request will be executed twice. If I changed the code to what I want:
protected void Page_Load(object sender, EventArgs e) {
if (!this.IsPostBack)
loadGrid();
}
I get no CheckedChanged event.
Is there a possibility to get:
- Adding a Checkbox in RowDataBound
- Only "LoadGrid()" if it is no PostBack
- Getting the CheckedChanged event of the relevant row
View 2 Replies
Aug 31, 2010
I am currently adding checkbox functionality to a system. I would like to check a group of users and add them into a db table. I currently have the administrator values flowing into the db table fine but it will not insert the empID into the table from the gridview. Here is my code:[Code]....
View 5 Replies
Mar 15, 2010
i have a gridview control i added checkbox contrl dynamically but i am not getiing the reference of checkbox in button clilck event here is my code Gridvew
[Code]....
.vb code
[Code]....
View 6 Replies
May 7, 2015
when i checked the checkbox in parent gridview, all checkbox in child gridview will be checked.
how can i select the checkbox of child gridview checkbox in the when i select the checkbox from the parent gridview?
code behind
protected void OnCheckedChanged(object sender, EventArgs e)
{
[Code].....
View 1 Replies
May 13, 2010
I've read that the gridvies automatically displays a chekbox control if the data type of the field is boolean.
Doesn't seem to work for me.
I'm using SQLServer2008 and set the data type of the column to 'bit'
[Code]....
View 2 Replies
Aug 20, 2010
I want to select all checkBox in Gridview when click to header checkBox.I have created design such that CheckBox is not available to header of Gridview.It is in other table. Below is design of gridview.
[Code]....
View 9 Replies
Jun 29, 2010
I am dynamically binding a typed list to a GridView control.
The Grid View Control is in an asp.net page that is wrapped in an asp:UpdatePanel (Ajax).
The first column contains a checkbox control.
Only one checkbox may be checked in this column.
If the user checks a checkbox, all other checkbox must be unchecked.
I am trying to achieve this using client-side script without success.
In the handler for the GridView's RowDatabound event, have attempted to add an attribute to the CheckBox contained within the cell.
[code]....
View 2 Replies
Jul 4, 2010
in a grid view i have a checkbox column ,which is making checked based on the char value from the SQL DB.
In SQL DB field type is char(1).
My requirement is , need to pass "Y" if checkbox is true ,and "N" if checkbox is false.How to pass that parameter in an update statement.
How it is possible?I used the parameter like as follows.But it is giving me an error when i click update.Groupid parameter is working perfect.The error is coming from the "HPermission" parameter.
<asp:BoundField DataField="GroupID" HeaderText="GroupID" InsertVisible="False" ReadOnly="True" SortExpression="GroupID" />
<asp:TemplateField HeaderText="Hud" >
<ItemTemplate>
<asp:CheckBox ID="chkStatus1" runat="server" AutoPostBack=false
Checked='<%# Convert.ToBoolean(Eval("HPermission").ToString().Equals("Y")) %>'
/>
</ItemTemplate>
<ItemStyle HorizontalAlign="Center" />
</asp:TemplateField>
UpdateCommand="exec [dbo].[GridUpdDel] @GroupID,@HPermission,'UPDATEPERMISIION',0,'',''" >
<UpdateParameters>
<asp:Parameter Name="GroupID" />
<asp:Parameter Name="HPermission" />
</UpdateParameters>
View 3 Replies
May 5, 2010
My code behind reads from a database and depending on the results depends on the display. It then allows the user to choose one item. However, I want to also give a checkboxlist to allow multiple options.
My function shows (currently only one option available to select at a time)
[code]....
View 2 Replies
Mar 25, 2010
I have created a DataSet which is connected to an Access Database. This DataSet is linked to a report and I would like to apply a filter to only display information relevant to the logged in user. My question is, if I wanted to add a parameter to the filter in my DataSet, what is the correct syntax when entering parameters? Whatever I try, it seems to convert automatically to a string.
View 9 Replies
Aug 24, 2010
how do i add a new parameter to an existing query string?
[URL]
now i need to add a new parameter say, showsearch.
View 1 Replies
Aug 7, 2010
I have the following routes setup in my route config file. I have a config reader that maps these to MVC-style routes.
[route name="customers" url="customers/{statename}/{marketname}/{pagenumber}"]
[controller name="Customers" action="Display" //route]
[route name="pcustomers" url="{customername}/customers/{statename}/{marketname}/{pagenumber}"]
[code]...
View 2 Replies
Mar 5, 2010
I am trying to display checkboxes in front of every row in list view. So that after selecting the desired checkboxes user clicks on delete button and we should delete that records.
but how can it be done?
View 3 Replies
Mar 2, 2010
I am using a gridview where i am calling a stored procedure which has 4 input parameters. Out of these 4 parameters, values are to be given such that DomainId = This has to be the row which is to be deleted. This is a primary key Domain = This field has to be passed to SP as NULL. Description= This field has to be passed as NULL. OperationType= This field has to be passed by programmer as some static value say 4 How to i need to specify these here... More details of the Question are here.
<DeleteParameters>
<asp:ControlParameter ControlID="GridView1" Name="DomainId"
PropertyName="SelectedValue" Size="4" Type="Int32" />
<asp:Parameter DefaultValue="" Name="Domain" Size="16" Type="String" />
<asp:Parameter DefaultValue="" Name="Description" Type="String" />
<asp:Parameter DefaultValue="4" Name="OperationType" Type="Byte" />
</DeleteParameters>
On running my code using this. I gets an error
Procedure or Function 'spOnlineTest_Domain' expects parameter '@Domain', which was not supplied
View 2 Replies
Jul 1, 2010
I have a checkbox inside a repeater like below..I'm having trouble figuring out how I need to tie the onclick event to a javascript function..I know I need to use somthing like
butSubmit.Attributes.Add("onClick", "return confirmSubmit();") but Since my checkbox is inside a repeater and I'm using master pages. I'm not sure how I need to use the findcontrol to so I can call the Add method?
I need to add an onclick to the ChkAll checkbox
[Code]....
View 6 Replies
Feb 25, 2011
I have a simple script making a request to the server:
var DTO = { 'path': path };
var url = 'default.aspx/Get';
var test;
$('#getInstance').click(function () {
$.ajax({
url: url,
type: 'POST',
dataType: 'json',
data: JSON.stringify(DTO),
contentType: 'application/json; charset=utf-8',
success: function (msg) {
test = msg;
},
error: function (jqXHR, textStatus, errorThrown) {
alert(textStatus);
alert(errorThrown);
}
});
});
This works fine as in it connects to the server and gets the data back, with one simple problem. It is treating this request as a cross domain request, therefore using jsonp. The server code is here:
[WebMethod]
[ScriptMethod(ResponseFormat = ResponseFormat.Json)]
public static MyObject Get(string path)
{
MyObject foo = new MyObject();
return foo;
}
Normally this would not be a problem, except that I am accessing a WebMethod, and it doesnt have the capability to return a jsonp response (meaning it has no way to attach the callback function to the response. Now, if this was a manual response, I could hack it up and attach the parameter, but I am taking advantage of the built-in serialization, so no way to mess around with the response. [URL]
Let me just stress the fact that this code works. The only problem is jQuery treating this request as cross domain. But Why? UPDATE: Well, after many more hours and more testing I have narrowed this issue down to it being a bug in jquery 1.5.1. I did some testing with older versions (all 1.4 versions) and I had no problem, the request was made using JSON, and the response was received successfully. What could be the change they made that would consider this request a CORS?
View 2 Replies
Jan 4, 2011
I am trying to consume a third party web service. In order to access any web method I need to pass session id with soap header in each request. I am trying to modify my header but haven't been successful. I am using proxy in 2.0. I created a separate class which inherits the soap header. I have copied my code but I am not sure how to go about this. How do I attach this header to proxy.
[Code]....
View 2 Replies
Jan 14, 2010
Looping Through Checkbox List and adding selected items to MS SQL DatabaseI don't want to store it using comma deliminator.I will need to do a search on analyze which users have what music in common.The image above is from a tbl_lookup_music table I created. MusicID, MusicNow how should I build the logicIF we have a user that has a tbl_profile table. And listens to many different types of music. How should We store the data.------------------------------------------------------------------------------------------CREATE TABLE [dbo].[tbl_lookup_music]( [MusicID] [int] IDENTITY(1,1) NOT NULL, [Music] [nvarchar](64) NOT NULL, ---- Type of music. CONSTRAINT [PK_tbl_lookup_music] PRIMARY KEY CLUSTERED ( [MusicID] ASC )WITH(PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF,ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY----------------------------------------------------------------------------------------------CREATE TABLE [dbo].[tbl_Profile_Music]( [ProfileMusicID] [int] IDENTITY(1,1) NOT NULL, [ProfileID] [int] NOT NULL, [MusicID] [int] NOT NULL,PRIMARY KEY CLUSTERED ( [ProfileMusicID] ASC)WITH(PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF,ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]) ON [PRIMARY]GOHow should I setup this table.
View 4 Replies
May 3, 2010
I have a GridView that I was previously populating via an ObjectDataSource, and this code was working perfectly (ie, when the checkbox was checked Checkbox.Checked = true):
CODE BEHIND:
[Code]....
[Code]....
View 9 Replies