I am using web services in my applcation. I know when calling webservices the soap is created.
My requirement is to create soap sub header below like using vb.net code. Is it possible?
<SubHeader>
<username>sasi</username>
<password>infot</password>
</SubHeader>
In my ASP.Net (2.0) Web Service implementation (The implementation class derives from
System.Web.Services.WebService with WebServiceBinding confirming to WsiProfiles.BasicProfile1_1 .
The SOAP response sent out by the Service has two elements missing :
1> The XML header itself : (<?xml version="1.0">)
2> The opening and closing Envelope tags with NameSpace ("<S:Envelope xmlns:S=http://schemas.xmlsoap.org/soap/envelope/>" and "</S:Envelope>" ).
This results in "breaking" of my client unless the above mentioned headers are inserted at the client end, and my intent is to avoid bypasses at the client end as far as popssible.Is this the default behavior ?
I'm pretty new to SOAP so go easy on me. I'm trying to setup a SOAP service that accepts the following header format:
<soap:Header>
<wsse:Security>
<wsse:UsernameToken wsu:Id='SecurityToken-securityToken'>
<wsse:Username>Username</wsse:Username>
<wsse:Password>Password</wsse:Password>
<wsu:Created>Timestamp</wsu:Created>
[code]...
ASP.Net 2.0 Web Services automatically create both SOAP 1.1 and SOAP 1.2 bindings. Our web service, however, has SOAP extensions and custom exception handling that make the assumption that only the SOAP 1.1 binding is used (for example, the SOAP extension uses the HTTP SOAPAction header to control behavior).
I am looking to correct the code that makes these assumptions and make it work with either SOAP 1.1 or SOAP 1.2 properly. I am running into a bit of a problem in the generation of elements for our SOAP faults.
Consider the following web method implementation:
[Code]....
The SOAP 1.2 response now has the wrong qualified name for the detail element. It should be <soap:Detail>, but instead is merely <detail>, same as the SOAP 1.1 response.
It seems that the ASP.Net 2.0 framework has done quite a bit to transform a SOAPException into the appropriate form for the SOAP version, but neglected to properly handle the detail element. Additionally, they don't seem to have exposed the correct SOAP 1.2 qualified name for the detail element as was done with the SoapException.DetailElementName property.
So, what is the correct way to add a detail element to a SOAP fault response that works for both SOAP 1.1 and SOAP 1.2? Do I need to detect the SOAP version myself and hard-code the SOAP 1.2 qualified name for the detail element?
I am developing a web application which uses a third party Web service. It requires Username & Password in SOAP Header request. I am passing those credentials well and the web service returns an XML string in Response and also a SESSION ID in the SOAP Header.
I don't know how to read/access the soap header from the response sent from the web service.
how do i call webservice via httpwebrequest with soap header
[Code].....
but i don;t know where to add AuthSoapHd for username and password.
HttpWebRequest request = (HttpWebRequest)
HttpWebRequest.Create(url);
String xmlString = txtInput.Text;
ASCIIEncoding encoding = new ASCIIEncoding();
[Code]....
One of our client uses squid proxy and tries to connect to our asmx web service(which is deployed on our server over internet) via our windows application. But windows application fails to connect to our web service and gives below error.."This method call needs the custom bla bla.. " Soap ExceptionProxy (squid) shows this error:127.0.0.1 - - [10/Aug/2010:14:35:55 +0300] "POST http://abc:83/service.asmx HTTP/1.1" 500 759 "-" "Mozilla/4.0 (compatible; MSIE 6.0; MS Web Services Client Protocol 2.0.50727.4927)" TCP_MISS DIRECTWe have used soap header security and we are also passing soap header credential while calling the service. Application runs well at our end but can anybody guid me, what could be the problem ?
View 4 RepliesI am trying to consume a third party web service. In order to access any web method I need to pass session id with soap header in each request. I am trying to modify my header but haven't been successful. I am using proxy in 2.0. I created a separate class which inherits the soap header. I have copied my code but I am not sure how to go about this. How do I attach this header to proxy.
[Code]....
I am trying to implement webservice authentication using SOAP Header. how to provice single authentication which applied to all the methoads of webservice.
Example :Â
public class Service:System.Web.Services.WebService
{
public AuthSoapHd spAuthenticationHeader;
public Service()
[code]....
On this sample it has only one method and based on the username and password mataches it provides  access. As like this there are plenty of web methoad's in my webservice and i don't want to check the username and password on all the methoads. instead i wanted to checkonce and provide access to all the methods.Â
how to display a header of gridvew as a 3D view color Header?
View 14 RepliesScenario:
I have a Gridview where I want to handle the Sorting in a custom control that I've added to the header.
I've added this control to my GridView's Header via OnRowCreate event handling. I want the Sort Expressions to persist session to session (via Webparts Personalization)
Here is what I have for adding the custom header control to the GridView Header
[Code]....
This works out well for adding the control, but I can't get anything to persist because these controls are creating initially via postback (per the event) and re-created on all subsequent postbacks. I can't add an If(!IsPostback) because the controls are initially created on the gridview's postback (well at least thats how it's acting when I put it in there) If I were to add this control via the ASP page, not via the Codebehind, I would be able to persist the control. If I try to treat it as though everything is setup correctly, and assign my custom control's controls to [Personalizable], I get a runtime error telling me that I can only have webpartzones in or before Page_init (I'm guessing this is due to when/where the
gridview hits the OnRowCreate event). If there is some fundimental logic I'm missing, or best practices that I'm moving away from,
I call a webservices from my javascript and im getting response as error.
Server did not recognize the value of HTTP Header SOAPAction:
is there anyway i can add in the gridview in header column name a button instead of label ?
column name 1 column name 2 column name 3 button
i am using checkbox column in item template for the button ,i wish after selecting checkbox for some row to click on the button on the header !!
i have a problem with ListView control,when i bind data to it, it shows the heder of it also.
i don't want to show me the hedear, what should i do?
[Code]....
I am using the following code to change the header based on the session variable
[code]....
How to pass gridview particular column values to another page's table header...
View 1 RepliesI have a Tab Container that I would like to be able to add a star (*) at the end of the tab header text when there are NEW Users to be approved by the Site Administrator. By default meaning that is what I typed in designer mode is "Users Waiting Approval", but when I load the page I run a routine to see if there are and new users requesting access and at that point durning the page load I would like to change the tab from "Users Waiting Approval" to "Users Waiting Approval *" with the star at the end (*). How can I update this tab header text durning the page load event? Is there some javascript function I can call like set_HeaderText?
View 1 RepliesI am having a asp.net page where I am using Ajax Tab control. When i am running the page, the text of all tab is not able to view. I want to change the height of Header text.
View 1 Repliesin the accordian below:-
Arrow-collaspsed image appears in the background of the header text when I want it BEFORE the header text. Also, when the Header of accordian is seleceted, the arrow-collapsed image is not changing to arrow- expanded.
<cc1:Accordion ID="Accordion1" runat="server" FadeTransitions="true" Visible="true" AutoSize="None" SelectedIndex="0" RequireOpenedPane="false" TransitionDuration="250"
HeaderCssClass="accordionHeader toggler" [code]...
i have a gridview bound to sql datasource with template fields binding the columns. I have set the Header Style to a css class. I have 3 columns not bound to data as Add, Edit and Delete. When I set the text color to white for the header only the non bound columns go white. The bound columns are BLUE like hyperlink. Any one know a way round this. (If I set the style in the gridview the all columns are white. Want to set in external css file).
[Code]....
How to display dynamic header for datalist control(Dates are dynamic).Also i want header in each row.I want something like this.Words in bold are headers.Header also in each
row.8/1/2010,8/8/2010,8/15/2010,8/22/2010 are dynamic dates whic change every month based on user selecting date from datecontrol.
HeadCount 8/1/2010 8/8/2010 8/15/2010 8/22/2010
Forecaster HC 447 446 441 432
Agents Scheduled 447 446 441 432
I've trying to use the API for CapsuleCRM... [URL] I've been reading some articles on SOAP in asp.net and I just don't get it. Most of them seem to be ablut creating a web service, not using it and none of them seem to explain how to use basic HTTP authentication. I have got as far as constructing the XML i want to send to the API but I could really do with seeing some example code which makes an http call using http authentication to a SOAP API.
View 1 RepliesI need to make a report with a hidden header , But I need to show the header Only when printing or exporing to Excel or PDF.
View 1 RepliesWhat is the namespace used for in a SOAP web service?
View 3 RepliesI have a SOAP webservice. One method has a return type of XmlDocument. I then sent this service to guys that need to consume it. And this is there response: I see the web service returns and xml string. Why not just wrap the results in the web service response itself? what he means by that? I have asked, but I have received no reply from him yet. That I can make it return proper XML and not XML formatted string?
View 4 Replies
