I have a document that I have included in my VS 2010 solution. It is in a folder called "MyFolder" the file itself is called "MyDoc.docx". I've tried the following ways to open the file but none work:
Stream s = File.OpenRead("/MyFolder/MyDoc.docx");
and
Stream s = File.OpenRead("MyFolder/MyDoc.docx");
and
Stream s = File.OpenRead("~/MyFolder/MyDoc.docx");
What is the proper path for this file?
I m new in web part tools in asp.net, i create a simple page using web part tools, but now i want in my web part zone too open a web site like I Google..
when u use i google there is a functionality to open a web site in web part zone.
I have a website which was created by someone; now I am trying to open it.
My doubt is will that project contain a solution? Within Visual Studio, I am trying to open through the open website option, but I didn't find a solution.
Is that right way? How best can I open a website with Visual Studio?
I have a Problem with an very old ASP.NET 1.1 application. I cannot open (load) it in Visual Studio 2003 (on a Win 2003 server) any more. I get an error message,that the component for the communication with the "Front Page - Server Extensions" cannot be found (I use a german VS 2003, so I have not the exact English message). The extensions are installed. That can be the reason for that respectively how can I solve this problem.
Another Question: Is there a possibility to open an ASP.NET 1.1 application in VS 2010? Tthe upgrade wizard tries to convert it, but the conversion results in errors.
When i try to open a csv file from my asp.net 3.5 app by clicking on the link provided, a file download dialog box appears.When i click on the open button from there , i get this eror
C:Documents and settingsUserNameLocal SettingsTemporary Internet FilesContent.IE5X9TXTM06myfilename.csv could not be found .Check the spelling of the file name and verify that the file locationis correct?
Wjy am i getting this error? I am trying to open a file and it complains about file not found in the Temporary Internet Folder.I tried deleting the temp intrnet files.Dint work.I have IE 7 on xp professional sp3. Also i am streaming the file from the application. This happens only to some files and the rest of the files , i can open .
I'm trying to create a .NET solution and add class libraries to it. First - in VS2008 I go to File > New > Project > Other Project Types > Visual Studio Solutions > Blank Solution. Then - after VS2008 creates the blank solution I right click on the solution and select Add > New Project > Visual C# > Class Library. However, when I add the Class Library to the solution, the solution icon disappears from Solution Explorer (although the solution name is still in the VS2008 title bar). Why does the solution icon disappear
from the Solution Explorer when I attempt to do this?
I have created a pdf file using aspose and need to open it without saving the pdf.Is it possible.
View 1 RepliesI am stumped by a serious issue in Vs 2008.
I created a Blank solution called HelloWorld.Then I added a new Class Library project by the name of HelloWorldService.After creation of the
Class Library project the Solution name disappeared from Solution Explorer.
As a result of which I can now only add new items into the Class Library project but cannot add new item to the solution.
This appears to be a pretty old problem as I found it in another link on the internet.
[URL]
It seems to be a bug.Has MS released a patch or a fix for this.
I am trying to open a file share link from the window.open ... but its adding the http://localhost/vdir/ before the path can any one say what is the problem?
View 1 RepliesHow many web.config file does a solution/project can contain?
View 6 RepliesWhen the user clicks on "OPEN" button, It should open up that(.txt) file which is on the file server in ReadWrite Mode (like in notepad) without any Access Issues.
Or simply has to be openend as temporary READONLY .Txt File. So that the user can close after viewing it.
I have been asked to modify an ASP.NET 3.5 web application. The solution file does not appear to be present on the web server, but there is a DLL. Is it possible to modify the solution by "reverse engineering" the DLL?
View 2 RepliesI am using VS 2010.
I've 2 web pages in a folder. At present I am using "File --> Open Website" to open those files in VS 2010.
But I want to open those files in VS'10 by clicking a solution file.
So how to create a solution file?
I have sql database db1..I am using this db1 for my web application...I had taken a back up for this file db1.bak......I want to restore this .bak file to a machine where no sql server is installed..Visual studio is working with solution explorer,where we can create tables,sp's etc...can I able to restore the .bak file to solution explorer?
View 1 RepliesI need to get a list of categories from the reader and put them in and array that I can use in this part of an xml file.I can get the categories from the reader, but I have no idea how to get the categories in the array to use it in the xml file. old way, hard coding the categories
'Dim arrData(7, 3) As String
''Store Name of categories
'arrData(0, 1) = "First"
'arrData(2, 1) = "Third"
[code]...
I have a folder that contains ASPX code and it's codebehind (C#) as well as a solution file. The compiled version of the application resides in the inetpub directory. Whenever I open the solution in Visual Studio, VS warns me that it is attempting to open a precompiled website and asks me if I want to continue. If I click NO it does nothing, but If I click yes it shows me the ASPX files in the inetpub directory. How do I make the solution work with that code in the directory that it is in (ie with the aspx and codebehind)?
View 2 RepliesI took over a rather large C# .NET 2.0 legacy web application from a colleague who is no longer available. This web application consists out of multiple projects in one solution. And I ran into a problem that I simply do not understand and hopefully somebody here will. The application has multiple .sitemap files included in a sitemap subfolder. So far so good. But I found one .sitemap file that was floating around in the root of the web project and is not used anywhere in the application (it's not included in the web.config).
I excluded this file. The web application runs fine without it. All menu's load correctly. Until I hit a method that uses recursion to look for certain controls (NOT the sitemap!). This method runs down through all controls from a given point and then crashes on the fact that the XMLSitemapProvider is missing this one file. This method is called many times without issues, but when the user logs out it somehow runs through a hierachical path of controls that eventually end up at the missing .sitemap file. The file also needs to be at this exact location in the root. Moving it somewhere else will cause the same crash. The file web.sitemap required by XmlSiteMapProvider does not exist.
I have searched for this filename and all ".sitemap" files but can not find it anywhere in the solution. 0 results found. I've ran past all the code leading up to the crash and it seems arbitrary (it has nothing to do with the sitemaps). The crash just happens because it hits the XmlSiteMapProvider looking for another control when it's going through all controls. In short, I can find no references what so ever to this file!
Since this web application is huge I can not manually go past every section of code. There is hundreds of thousands of lines of code. Does anybody know any other way then through the web.config to include a sitemap or how a sitemap file could be registered and where I should look? Final note: this application used localization. The sitemap's are localized and I found resources for this one sitemap. I hoped excluding those would solve the problem. Unfortunately it didn't.
how can I share one or two aspx file in two separated solution that if i change aspx file in both solution apply changes. Is it possible in visual studio 2008 or in Team foundation server?
View 1 RepliesI'm using the filestream and streamreader to read a file, however I don't want to read the whole thing.
I only want to read part of the file, not the whole thing. I'd like to read up to string "abc123" and then "x" characters after it. I've managed to get the result I want by reading the entire file, then doing a few splits, but obviously, if the string I want to look for happens to be 5 characters in, it's a huge waste to continue reading the rest of the file.
I m uploading a file and reading it. The problem is I dont want to save that file in a folder which is in my solution explorer. I want to save it in a different Drive. I m saving the file in a different drive using web.cofig <add key="UploadFileLocation" value="C:\VOL0\Upload\"/> and I m saving using code FileUpload1.PostedFile.SaveAs(ConfigurationManager.AppSettings["UploadFileLocation"] + SaveLocation); all goes fine, but I m reading the file and it is throwing an exception when I m trying to read file.
View 3 RepliesI'm trying to migrate an old asp.net 1.1 application to target the new .net 4.0 framework. There are good guides available on this [URL]. However, all approaches start with the assumption that the 1.1 project contains a solution file which one has to open using VS 2010 and go through the conversion wizard.
In my case, the project does not have any solution file, giving me a sort of chicken and egg issue.
Is there a way to add a 1.1 .net soution file with or without VS 2010? Using command line tools? What is so special about a solution file anyway?
We have several asp.net web applications we've built and we also want to embed them into various sharepoint pages. We need to have them look like standalone applications when viewed in their own pages, but also have them look like they fit within the sharepoint page when embedded. We are doing this currently with IFrames and it works ok, but I'm wondering if there is some sort of proxy web part where we can configure the web part to point to an existing web app and it will proxy the contents through from the web app into the sharepoint page removing the need for an IFrame. Possible?
View 2 RepliesSo I posted earlier on here because I had probelms connecting the login control to my database. All the login controls worked except the actual login. I created a user, that went to my database, but the login part still went to the defult .mdf file. So I have rebult this website from scratch many times. Not a big deal, I'm just starting it. But I'm really confused on how to connect to my database. It seems one way will work one time, but the next time it doesn't, and I have to connect in a diffrent way. And I always get diffrent errors.
Here is what I need to do, maybe there is a easier way of doing this. I already have a 32 bit program that uses a database. I'm just creating a web client to connect to the same db. I don't mind using the default mdf with the login controls. It already there, why re create it.
My thought was to take the asp tables created for the loging controls, add them to my exsisting DB. Point the login controls to my db. Create a realationship betwen the login user table and my user table so when a user logs in, they will see the correct information. I tried to leave the mdf file for the login control where it is, but I can't connect that with my db.
I have created a webservice which is saving some data into to db. But i am getting this error
Cannot open database "test" requested by the login. The login failed. Login failed for user 'xyzASPNET'.
my connection string is
add name="ConnectionString1" connectionString="Data Source=.SQLExpress;Initial Catalog=IFItest;Integrated Security=True" providerName="System.Data.SqlClient"
I have four columns in database. Consider it as a,b,c and d. I'm trying to place a and b column values in TO part and c and d column values in CC part in outlook. a,b,c,d contains six digits numeric values. I just need to place a and b columns values in to and c and d values in cc part on click of a button.
View 1 Replies
