How To Search Users Across The AD And To Add To A Group
Jan 25, 2010
I created a distribution group in AD and now wish to search for an user and to add the user to that group. I have written the following code to add a group:
Now I need to search for an user and to add the user to group if exists.. I have AD user id . Problem is that users are across the OU and I don't know the OU of each and every user. So i need to search for user across the AD and then to add to group... Need a code to do that..
We have many different clients, and each client can have multiple user accounts.Right now, we have user settings set up on the ASP project, and a WinForms application can see these settings, depending on which user logs into the winforms application. They are specific to the user. I want to make them specific to the client, so users can be in "groups" by their client, and all users in the group would see/update the same settings.
I want to use the Domain Users group to show all the users in a dropdown box. For some or other reason I cannot return all the users when looking for everyone under the domain so instead I was thinking of using the domain users group.This is part of my code:
is there a way i could find out how to get all the users in a group on my domain, i have a domain called "cot", within that domain we have multiple groups like "RO,Admin,PM,SPM and 2 or 3 more", i need to get all the users in a particular group, i am using vs2008 and coding on webforms with c#, i have tried various example i could find online but none have worked for me so far.
I'm developing a Asp.Net website and I need to display the four most recent tweets from a group of users (around ten) that will be set in the admin area of the website. I know twitter has an API, but I don't know where to start.
I want to populate members of a local computer group on a webpage and allow the user to add / remove users of that remote computer from a group say Administrators or Remote Users Group.
The application pool will be running with a user who is admin on all remove systems.
I want to create a seach textbox for users to enter a few keywords in ,..and then my sql query will display the results......( basically a little search engine for my website)Ok so im thinking of using the Containstable with ranking on how close these keywords are to eachother... so the closer the keywords are to each other... the higher their ranking will be.... but I also want to seach for these keywords in 4 columns in one Datatable how can I do this
I'm developing an ASP.NET application which has allows users to search for other users based on their name. This search is done using Linq to SQL. At the moment, I've only got 10 or so users in my database, so I can't really test the efficiency of my search query. I'm new to testing and such, but what is the best way to simulate 100/1000/10000 users on a query? Is there a tool (preferably free) that would allow me to perform tests to see how quickly the database can be searched if it had x number of users?
I've created a photo database and search engine that creates a xml that corresponds to the multiscale image xml.My problem is how to enable multi users to search at the same time?
In my organization we use nested groups. For a particular usage, we have a group (let's assume that the group name "kuku"), and the names of all the nested groups under it contains "kuku" as well.
We may assume that no other group in the LDAP has "kuku" in the name.
I need to create a filter which will return all the users which belong to one of the "kuku"s group.
Obviously, using this filter will bring only the head kukus
(&(&(objectclass=user)(objectclass=person))(memberOf=CN=kuku,cn=...rest of the group DN...))
How can I use wild card to fetch all users which belong to any kuku?
For example: (&(&(objectclass=user)(objectclass=person))(memberOf=CN=.*kuku.*))
I'm using a linq group by query (with two grouping parameters) and would like to use the resulting data in a nested repeater.
var dateGroups = from row in data.AsEnumerable() group row by new { StartDate = row["StartDate"], EndDate = row["EndDate"] }; "data" is a DataTable from an SqlDataAdapter-filled DataSet. "dateGroups" is used in the parent repeater, and I can access the group keys using Eval("key.StartDate") and Eval("key.EndDate").
Since dateGroups actually contains all the data rows grouped neatly by Start/End date, I'd like to access those rows to display the data in a child repeater. To what would I set the child repeater's DataSource? I have tried every expression in markup I could think of; I think the problem is that I'm trying to access an anonymous member (and I don't know how.) In case it doesn't turn out to be obvious, what would be the expression to access the elements in each iteration of the child repeater? Is there an expression that would let me set the DataSource in the markup, or will it have to be in the codebehind on some event in the parent repeater?
Stack-Overflow :3 I've got a kind of hard-case question.
So I'll try clearly explain my idea with my poor english :/ need select to DataTable SOME values from ???_**GetDisplayData **procedure for each day of previos month (GROUP IT) where group rules for different columns is different
I need to select some values in stored procedure from other stored procedure like this :
SELECT X FROM Y_Procedure(@ProcedureParameters)Also I need to select from dynamic SQL Procedure like
Y_Procedure=@Y+'_Procedure' SELECT X FROM Y_Procedure(@ProcedureParameters)
Also I need to load it to DataTable :-/INSERT INTO @Report (CellHorizontal, CellVertical, CellValue) --to TABLE SELECT Date,X2,X3 FROM Y_GetDisplayData(@Param)
SET NOCOUNT OFF; SELECT * FROM @Report
GetDisplayData works as select with parameters and that doesn't returns SQL DataTable And there is no way to recode GetDisplayData's procedures, it's just constant procedures for me.Finally I need to Group nodes from this table
INSERT INTO @Report (CellHorizontal, CellVertical, CellValue) SELECT T1.Date, IF ((Select grouptype...)=1) T1.X2 + T2.X2 ELSE IF ((Select grouptype...)=2) AVG(T1.X2,T2.X2), IF ((Select grouptype...)=1) T1.X3 + T2.X3 ELSE IF ((Select grouptype...)=2) AVG(T1.X3,T2.X3), (SELECT T2.Date,X2,X3 FROM Y_GetDisplayData(@Param) T2 WHERE T2.Date>T1.Date AND T2.Date>=T1.Date) FROM Y_GetDisplayData(@Param) T1 GROUP BY EVERY DAY ???--and here is epic fail
I can make all stuff on asp server :And C# allows me to use something like SelectCommand = IzmProc + "_GetDisplayData"; And then I will work (select special data) with DataTables on ASP.NET Server but it's better to make all on SQL ... But looking like it's just unrealizable on SQL >_<
I gonna think about C# realization,but my code is very weird , got errors and doesn't works >_<
I need to list a group of users, their group name is (IRS Group) to a list group. how to do this. I'm very new to asp.net and dont have much knowlegde about acctive directory.
I want a word search i doing the search like this , but it is giving character wherever there is in the string,if i give two character like ok it is searching for a full string where ever Ok is there select * from table1 where textfield like '%word%' this query would match word but also wordabc how can i make it aware of delimitions
I am trying to write a simple search form for our site. Here is my delima... I am trying to figure out that if there is nothing to search for in one textbox then search in the next textbox. The problem is that I dont know how to format my search string: For Example:
As a newbie coming from a Java background with tag libraries I wonder if there is a simple possibility to render areas depending on backend values.For example if I have search form I do not want to render the table for the search results as long as the user hasn't pressed the search button. Of course I can iterate over the model containing an empty list but this does not allow to suppress rendering the whole table.Using web forms I would just control the visibility of the affected tag(s) in the code behind file but how do I do this with ASP.NET MVC?Can I use a partital view for a case like this? But I think I would have the same problem. How can I determine if a partial view is rendered (e.g. the whole result table with header)?
I made a usercontrol consisting of an AJAX tab control, a textbox, and a gridview. The gridview is pulling data from a SQL database. When the gridview is outside of the tab control and I begin to enter text into the textbox, quicksearch begins to filter the information in the gridview. When i put the gridview and textbox inside an AJAX tab control quicksearch does not work. How do i need to structure the textbox and the gridview on an ajax update panel to get it to work?
i have some text boxs in a page and in the same page there will be a table 'grid' like for holding the search result.When the user start editing and of the textbox above, the search must start by sending all textboxs values to the server 'ajax', and get back with the results to fill the below grid.
Notes:This grid should support paging, sorting by clicking on headers and it will contains some controls beside the results such as checkboxs for boolean values and links for opening details in another page.
I know many ways to do this some of them are:1- updatepanel around all of these controls and thats it "fast dirty solution"
2- send the search criteria using ajax request using JQuery post function for example and get back the JSON result, and using a template will draw the grid "clean but will take time to finish and will be harder to edit later".
3- ....My question is:What do you think will be the best choice to implement this scenario? because i face this scenario too much, and want to know which implementation will be better regarding performance, optimization, and time to finish.
