I have a page insert form, It has been working fine for a while. All of the sudden it has stopped working in IE8. I think IE is timing out because my page is taking too long to insert and I am getting:
"Internet Explorer cannot display the webpage"
I am trying to add some code that logs to a table the time a page has taken to generate, from the request coming in to the response given back. The easiest way to do this is through our master page as it can add the timings of every page.Where I'm a little unsure, is when to put the start and end timings.Currently, I set the start time in the page.unload and the end time as the last part of the page.load on the master page.The figures coming back seem ok, but I'm not sure if I am picking the earliest and latest possible times to get my timings?
View 2 Repliesmy client/iis (not sure which) usually times out after about 30s - 1 minute while im debugging (stepping through code) which not only causes me to lose my spot and have to start over (usually stepping faster, making more mistakes) but the IIS Debug session closes completely and I have to warm up the entire session again.
What's the best way to get more time out of a debugging session?
Debugging a vanilla 3.5 Web Site (not app) on IIS 7.5 Classic Pipeline
My session keeps timing out in just a few minutes even though I've specified a 200 minute expiry.
In my web.config I've set the timeout for the forms and the sessionState. I've looked at some other similar questions on Stack Overflow but still can't suss this.
<authentication mode="Forms">
<forms loginUrl="~/Default.aspx" defaultUrl="~/secure/Default.aspx"
timeout="180"/>
</authentication>
<sessionState mode="InProc" cookieless="false" timeout="200" />
we have a reseller web application that uses basically the same asp.net codes on different domains. However we replaced the cookies in the web.config files to the root domain of each domain and the timeout time to 1000
HOwever for the initial site that was setup, it runs well. But every additional site times out after about 2mins
I have looked through the web.config so many times to see if anything is conflicting but cant find anything.
I am working on a project where there are 110 workers, each work for 4 hours in a batch of 8 worker, I want to Generate timing for this workers.
e.g
- Batch 1
- Worker 1-8 Timing 08:00am - 12:00pm Date 1/1/2010
- Batch 2
- Worker 9-16 Timing 12:00am - 04:00pm Date 1/1/2010
- Batch 3
- Worker 17-24 Timing 04:00am - 08:00pm Date 1/1/2010
Batch 4
Worker 25-32 Timing 08:00am - 12:00pm Date 1/2/2010
and so on, I am using ASP.NET and MS-SQL, I want to generate and save there record in database so I can print work chart for each month.
I have the following call in my master page
[Code]....
So, in the above on the Master Page onload I am calling the javascript to get the screen resolution Then in my default page....which is being used first. My master page is loading and then my default page is loading. I have this is my Page Load event
[Code]....
However, what is happening is that I am getting the MessageBox.Show from the default page saying the screen is <null> by <null> and then I start getting the alert boxes from the javascript saying what the screen width and screen height is. In my page Load event of default. how can I wait until the java script in Master is done? Or is the a better place to put these events?
I'm using ASP.NET MVC 3 with the Authorize attribute, but it keeps kicking me to the logon page after 1 minute, but even though my expiration is set to a very high value, it times out quickly. I check the cookie in my browser and its still there and not set to expire until about a month later, and it's set to be persistent, so I'm not sure why it keeps booting me. It only happens on my published location, locally it works just fine.
var ticket = new FormsAuthenticationTicket(username, true, 500000);
var encryptedTicket = FormsAuthentication.Encrypt(ticket);
var cookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket);
cookie.Expires = ticket.Expiration;
Response.Cookies.Add(cookie);
web.config:
<authentication mode="Forms">
<forms loginUrl="~/Account/LogOn" timeout="7200" slidingExpiration="false"/>
</authentication>
According to the msdn documentation, as you can see on the diagram, a server control's "Data binding events" occurs after all "control changed events". So in the case of a DetailsView control, the ItemInserted event would happen before the database operation?
View 1 RepliesI have a query that, when run in SQL Server Mgmt Studio query analyzer window, completes in about 5 seconds. However, when I attach this query to a table adapter in visual studio and try to preview the data, I get an error that says:"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."Please note, the dataset was successfully configured using the TableAdapter Configuration Wizard, so there didn't appear to be any syntax errors with my query. Also note that I have other datasets connecting to the same database that are working as expected, so it doesn't appear that it would be an issue with the server not responding. Does anyone have thoughts on what kinds of things, other than a query taking too long to run, that could cause this specific error?
View 1 RepliesI have a page that is opened in a popup window from the main page. Once i click insert it pops up a message that says you have successfully added blah blah. Then once you click ok it closes the popup page and goes back to the main page. I want to be able to refresh the main page back to how it was when you first land on the page. Here is the code for my insert button:
[Code]....
I prepared a ASP.NET web site. But it contains lots of flash controls. When you enter the page, some flash controls can't load but page is opening.So flash parts are shown not well.To solve this problem, I want to add a page loading code on the aspx page.An image or a gift is illustreted until the page fully loaded.give me a code but I can't know how I add the code to aspx page, so I need some instructions as well.
View 1 Repliescreate a page which contains a graph at the top,and for each item in the graph there's a fact sheet below.I already produce the fact sheets as stand-alone pages. Now,rather than recreating the fact sheet to include in the page I have to create, I'd like to use the work that already exists.
Is it realistic that I dynamically generate each fact sheet as needed, strip out the body and insert that into the new page?
I'm sure this is fairly straightforward but i'm having trouble getting it to work. I want to add a javascript function to my page, but only when the page postsback. So I have a button that calls some server-side code, and when it is finished and the page is re-loading I want the javascript function to be called. Thinking about this i guess I could just add a hidden variable and set it when the button is clicked, but i think i'd rather just insert the javascript onto the page when it is loading back. Is this possible, or even a good way to do it? Edit: Okay this is my OnClick method in the C# code.
protected void Save(object sender, EventArgs e)
{
Page.ClientScript.RegisterClientScriptBlock(this.GetType(), "alert", "<script type="text/javascript">alert('hello world');</script>");
EnforcementMatch(false);
EnforcementMatch(true);
ApplicationNotMatch();
ApplicationMatch();
Response.Redirect(Request.Url.ToString());
}
Another Edit: Just realised that the response.redirect at the bottom reloads my page cancelling out the code I put in, duh!
I am using Visual Studio 2008, and I want to insert a video from Youtube into my page, with minimum play and pause controls.Like this example http://uspoverty.change.org/blog/view/top_ten_videos_on_poverty_in_the_us
View 4 RepliesI wish to store some variables across my whole ASP.NET site, such as the site name/title and a multitude of others.
I wish to store them in an XML file with a name and value, and then insert them into the relevant place on the page using a tag like <% siteTitle %>.
How can I do this? I have seen similar with sites like SmarterMail and other ASP.NET off-the-shelf products, but they seem to use a value from their own DLL file, this is probably too much of a complex method, so I will need something simple like the XML method mentioned above. Having said this, I don't particularly want to use the AppSettings method.
I am currently generating a .doc file as html using asp.NET.
I wish to insert a page break to the page but don't know how.
I've tried using the css style='page-break-before:always' but it does nothing.
This is the code assigned to a button click event:
HttpContext.Current.Response.Clear();
HttpContext.Current.Response.Charset ="";
HttpContext.Current.Response.ContentType ="application/msword";
string strFileName = "GenerateDocument"+ ".doc";
[Code]....
i am planned to create website in asp.net
i have already created index page for my site
now i want to add photogallery to my site
When i try to insert html text into a div (i made it runat=server and i populate the div with html text. it's look like this,
string htmlData = "< html > blabla...< /html >";
divcontent.innerHtml = htmlData;
the page is damaged.but when i take the same html data and put it as is in an html file its shows properly.what should i take in consider ?
p.s. i am writing in asp.net (c#) VS2005.
How insert page break in rtf files using asp.net with c#.net version 1.1?
View 1 RepliesI have a website using "print" command which prints either form1 or form2 , in both cases i want it to insert page numbers at the center bottom, I am using the property of: page-break-before for each page
View 1 RepliesI m working on one page. It has three table for select, Insert and Update.
I wrote the join query for select statement. also i wrote the three Insert and Update statement.
i have some fields on one page which fields suppose to insert in one table. How can i Insert the multiple records into one table from one page using only one save button.
How to insert new page to word ?
[Code]....
I want to, text "Second Page" will be on the next page. How can I insert text on the next page word document?
I have been building web apps for a while now and still do not know the answer to this.
I have just built a web app (using webforms) which has a page for inserting a new budget request and a page to edit and manage this budget request.
What is a pain is if I have to make changes to the business logic then I need to edit same / similar code in two places.
What I am thinking of doing is creating one page to handle this with only UPDATE logic and if the URL on page load has no ID parameter then create a blank row in table and use this new ID and then UPDATE.
Is this bad practice? I obv know I need to clear out old blank rows at some point.
insert data to database from a content page of a master page. My code is working fine when i use my code without master page but with content page of master page i dnt knw what goes wrong.
View 2 Replies