Web Forms :: Timing Aspx Page Execution/generation?
Jul 2, 2010
I am trying to add some code that logs to a table the time a page has taken to generate, from the request coming in to the response given back. The easiest way to do this is through our master page as it can add the timings of every page.Where I'm a little unsure, is when to put the start and end timings.Currently, I set the start time in the page.unload and the end time as the last part of the page.load on the master page.The figures coming back seem ok, but I'm not sure if I am picking the earliest and latest possible times to get my timings?
View 2 Replies
Similar Messages:
Jan 5, 2010
I have a page insert form, It has been working fine for a while. All of the sudden it has stopped working in IE8. I think IE is timing out because my page is taking too long to insert and I am getting:
"Internet Explorer cannot display the webpage"
View 6 Replies
Sep 10, 2010
In my code I am assigning certain values to labels from data reader.While debugging I can see that proper values are assigned but the changes are not reflecting in the end of debug on the webpage that are executing.
[Code]....
When the page is loaded for the first time the first row from the datareader is coming properly but after the click of next button change is not reflecting on the webpage.
View 2 Replies
Mar 6, 2011
we have a reseller web application that uses basically the same asp.net codes on different domains. However we replaced the cookies in the web.config files to the root domain of each domain and the timeout time to 1000
HOwever for the initial site that was setup, it runs well. But every additional site times out after about 2mins
I have looked through the web.config so many times to see if anything is conflicting but cant find anything.
View 2 Replies
Apr 21, 2010
i have developed an ERP in asp.net 3.5. The problem is that when published and as well as during development, the execution speed of page is very slow. I have off the compilation mode in web.config and also get all the data in page load and then filter it using Dataview rowfilter property but i can't get much better speed.
View 5 Replies
Dec 24, 2010
I'm using ASP.NET MVC 3 with the Authorize attribute, but it keeps kicking me to the logon page after 1 minute, but even though my expiration is set to a very high value, it times out quickly. I check the cookie in my browser and its still there and not set to expire until about a month later, and it's set to be persistent, so I'm not sure why it keeps booting me. It only happens on my published location, locally it works just fine.
var ticket = new FormsAuthenticationTicket(username, true, 500000);
var encryptedTicket = FormsAuthentication.Encrypt(ticket);
var cookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket);
cookie.Expires = ticket.Expiration;
Response.Cookies.Add(cookie);
web.config:
<authentication mode="Forms">
<forms loginUrl="~/Account/LogOn" timeout="7200" slidingExpiration="false"/>
</authentication>
View 1 Replies
Dec 1, 2010
i want to write aspx page html from aspx.cs page on page load..
i hav already used div.innerHtml...
i want to write below code in aspx page from aspx.cs page
[code]....
View 5 Replies
Nov 17, 2010
On button click i do action A1, like
btnAction1_Click(object sender, ImageClickEventArgs e) {
//Action 1 code
}
now ,i'll click this button. If page is refreshed after Action1 is done..request is sent again and same action is repeated.
View 14 Replies
Jan 28, 2011
I am new to asp. I need to generate a report of a registration form in a new page. how to create a report in a blank page and download that page as a word or pdf document..
View 1 Replies
Apr 14, 2010
what i wanna do is:
there is an dropDownList in the master page with 4~5 items.
i've prepared 4~5 sub-page related to the above item. when the dropDownList.ItemChanged, the subpage content will show their own page.
use html iframe to include another aspx page.
in my cs code:
[Code]....
but when i change the item in the dropdownlist, the error pops up:
[URL]
View 1 Replies
Mar 22, 2011
(I believe that this applies to both normal ASP.NET web parts and SharePoint hosted web parts)
The web part has an 'export' button that renders the output as csv and sets the appropriate headers so its opened in Excel.
Hooking in the buttons click event, clearing the response, adding the appropriate headers and content types is trivial - example
However I've noticed that if this code added to a web part and a debugger attached then if there are multiple instances of this (or any other) web part on the page then neither HTTPApplication.CompleteRequest or Response.End stop the processing/page lifecycle and all the events for all the page controls still fire.
This is wasteful in this example as the other web parts don't need to run - nothing they do will get to the response.
View 3 Replies
Apr 29, 2010
my client/iis (not sure which) usually times out after about 30s - 1 minute while im debugging (stepping through code) which not only causes me to lose my spot and have to start over (usually stepping faster, making more mistakes) but the IIS Debug session closes completely and I have to warm up the entire session again.
What's the best way to get more time out of a debugging session?
Debugging a vanilla 3.5 Web Site (not app) on IIS 7.5 Classic Pipeline
View 1 Replies
Sep 4, 2010
My session keeps timing out in just a few minutes even though I've specified a 200 minute expiry.
In my web.config I've set the timeout for the forms and the sessionState. I've looked at some other similar questions on Stack Overflow but still can't suss this.
<authentication mode="Forms">
<forms loginUrl="~/Default.aspx" defaultUrl="~/secure/Default.aspx"
timeout="180"/>
</authentication>
<sessionState mode="InProc" cookieless="false" timeout="200" />
View 2 Replies
Feb 26, 2011
How to stop the execution and redirect to the login page. I tried FormsAuthentication.Signout but seens it doesn't stop the execution and let the code continue.
View 1 Replies
Oct 7, 2010
I only have 1 user that cannot see reports. I even did a gotomeeting and we clicked refresh serveral times and we get the Report Execution Session died.
Every other user works on VPN. The rest of the wqeb site also works fine. Does any have some pointers on find a resolution for this user. He is windows authenticated and using a VPN. ( I have 1 user out of at least 50 have worked fine with a report viewer over VPN.
View 2 Replies
Feb 24, 2011
I am having a base class which implements some basic authentication for all the pages in the application.
public class BasePage : Page
{
public void Page_PreLoad(object sender, EventArgs e)
{
if (!IsUserValid())
{
Response.Redirect("default.aspx");
[Code]....
How to stop page life cycle for AuthenticatedUser, if the user is invalid?
View 2 Replies
Oct 31, 2010
I am working on a project where there are 110 workers, each work for 4 hours in a batch of 8 worker, I want to Generate timing for this workers.
e.g
- Batch 1
- Worker 1-8 Timing 08:00am - 12:00pm Date 1/1/2010
- Batch 2
- Worker 9-16 Timing 12:00am - 04:00pm Date 1/1/2010
- Batch 3
- Worker 17-24 Timing 04:00am - 08:00pm Date 1/1/2010
Batch 4
Worker 25-32 Timing 08:00am - 12:00pm Date 1/2/2010
and so on, I am using ASP.NET and MS-SQL, I want to generate and save there record in database so I can print work chart for each month.
View 1 Replies
Dec 19, 2010
I have the following call in my master page
[Code]....
So, in the above on the Master Page onload I am calling the javascript to get the screen resolution Then in my default page....which is being used first. My master page is loading and then my default page is loading. I have this is my Page Load event
[Code]....
However, what is happening is that I am getting the MessageBox.Show from the default page saying the screen is <null> by <null> and then I start getting the alert boxes from the javascript saying what the screen width and screen height is. In my page Load event of default. how can I wait until the java script in Master is done? Or is the a better place to put these events?
View 6 Replies
Nov 19, 2010
I need to capture the amount of time that ASP.net takes to execute each page request in my application, but I need to exclude any network latency. I am currently capturing render times by using the StopWatch class and starting the stopwatch during the OnInit method of the page lifecycle and stopping it after the Unload method completes. It seems that the Unload method includes the time it takes send the request to the client, thus including any internet/network latency. What is the last possible point I could stop the stopwatch in the Page Life Cycle that would not include the time it takes to send the request to the client. Would it be directly before the Unload event?
Related question: Does ASP.net finish building the response before it starts sending to the client? Or does it start sending asynchronously, while the response is being formed?
I am using ASP.Net 2.0 with IIS 5 currently.
I have this code in a class that all of my pages inherit from:
readonly Stopwatch _serverExecutionTime = new Stopwatch();
protected override void OnInit(EventArgs e)
{
_serverExecutionTime.Start();
base.OnInit(e);
}
protected override void OnUnload(EventArgs e)
{
_serverExecutionTime.Stop();
base.OnUnload(e);
}
UPDATE
I tried capturing the execution time at the end of the OnRender method, at the start of the OnUnload method and at the end of the OnUnload method. In all three cases the difference in times was at most 1 millisecond. Even when testing this from a client in Europe to a server in the USA, the times were identical.
View 3 Replies
Nov 12, 2010
i am trying to have a download on my page. I have implemented the code below but code execution stops after the download message pops up, even if i press save or cancel, nothing happens after that.
[Code]....
I have tried it a few times without Response.Clear() and Response.End() but it didn't make any difference to take these off. Is there anyway I can achieve this without having to using an IFrame?
View 7 Replies
Nov 9, 2010
According to the msdn documentation, as you can see on the diagram, a server control's "Data binding events" occurs after all "control changed events". So in the case of a DetailsView control, the ItemInserted event would happen before the database operation?
View 1 Replies
Jul 6, 2010
I have a query that, when run in SQL Server Mgmt Studio query analyzer window, completes in about 5 seconds. However, when I attach this query to a table adapter in visual studio and try to preview the data, I get an error that says:"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."Please note, the dataset was successfully configured using the TableAdapter Configuration Wizard, so there didn't appear to be any syntax errors with my query. Also note that I have other datasets connecting to the same database that are working as expected, so it doesn't appear that it would be an issue with the server not responding. Does anyone have thoughts on what kinds of things, other than a query taking too long to run, that could cause this specific error?
View 1 Replies
Aug 23, 2010
is it possible to place an aspx page inside the update panel of another aspx page? if possible let me know the way to do that.
View 1 Replies
Jan 15, 2011
How can I call a public property declared on a ASPX page from a different ASPX Page? Is that possible? It is a website project. How can I get/call this property from a different aspx page? I have attempted this from the other page, but it is not recognizing the partial class: private Test_Default _test; It does not recognize the "Test_Default"
I.E.
[code]....
View 2 Replies
Oct 19, 2010
I have to pass the value [sysid] for getting the value from another table.
I coded asp:
[code]....
View 7 Replies
