Debugging Timing Out With IIS?
Apr 29, 2010
my client/iis (not sure which) usually times out after about 30s - 1 minute while im debugging (stepping through code) which not only causes me to lose my spot and have to start over (usually stepping faster, making more mistakes) but the IIS Debug session closes completely and I have to warm up the entire session again.
What's the best way to get more time out of a debugging session?
Debugging a vanilla 3.5 Web Site (not app) on IIS 7.5 Classic Pipeline
View 1 Replies
Similar Messages:
Jun 3, 2010
I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 Replies
Mar 7, 2011
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
View 1 Replies
Sep 4, 2010
My session keeps timing out in just a few minutes even though I've specified a 200 minute expiry.
In my web.config I've set the timeout for the forms and the sessionState. I've looked at some other similar questions on Stack Overflow but still can't suss this.
<authentication mode="Forms">
<forms loginUrl="~/Default.aspx" defaultUrl="~/secure/Default.aspx"
timeout="180"/>
</authentication>
<sessionState mode="InProc" cookieless="false" timeout="200" />
View 2 Replies
Jan 5, 2010
I have a page insert form, It has been working fine for a while. All of the sudden it has stopped working in IE8. I think IE is timing out because my page is taking too long to insert and I am getting:
"Internet Explorer cannot display the webpage"
View 6 Replies
Mar 6, 2011
we have a reseller web application that uses basically the same asp.net codes on different domains. However we replaced the cookies in the web.config files to the root domain of each domain and the timeout time to 1000
HOwever for the initial site that was setup, it runs well. But every additional site times out after about 2mins
I have looked through the web.config so many times to see if anything is conflicting but cant find anything.
View 2 Replies
Oct 31, 2010
I am working on a project where there are 110 workers, each work for 4 hours in a batch of 8 worker, I want to Generate timing for this workers.
e.g
- Batch 1
- Worker 1-8 Timing 08:00am - 12:00pm Date 1/1/2010
- Batch 2
- Worker 9-16 Timing 12:00am - 04:00pm Date 1/1/2010
- Batch 3
- Worker 17-24 Timing 04:00am - 08:00pm Date 1/1/2010
Batch 4
Worker 25-32 Timing 08:00am - 12:00pm Date 1/2/2010
and so on, I am using ASP.NET and MS-SQL, I want to generate and save there record in database so I can print work chart for each month.
View 1 Replies
Dec 19, 2010
I have the following call in my master page
[Code]....
So, in the above on the Master Page onload I am calling the javascript to get the screen resolution Then in my default page....which is being used first. My master page is loading and then my default page is loading. I have this is my Page Load event
[Code]....
However, what is happening is that I am getting the MessageBox.Show from the default page saying the screen is <null> by <null> and then I start getting the alert boxes from the javascript saying what the screen width and screen height is. In my page Load event of default. how can I wait until the java script in Master is done? Or is the a better place to put these events?
View 6 Replies
Dec 24, 2010
I'm using ASP.NET MVC 3 with the Authorize attribute, but it keeps kicking me to the logon page after 1 minute, but even though my expiration is set to a very high value, it times out quickly. I check the cookie in my browser and its still there and not set to expire until about a month later, and it's set to be persistent, so I'm not sure why it keeps booting me. It only happens on my published location, locally it works just fine.
var ticket = new FormsAuthenticationTicket(username, true, 500000);
var encryptedTicket = FormsAuthentication.Encrypt(ticket);
var cookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket);
cookie.Expires = ticket.Expiration;
Response.Cookies.Add(cookie);
web.config:
<authentication mode="Forms">
<forms loginUrl="~/Account/LogOn" timeout="7200" slidingExpiration="false"/>
</authentication>
View 1 Replies
Nov 9, 2010
According to the msdn documentation, as you can see on the diagram, a server control's "Data binding events" occurs after all "control changed events". So in the case of a DetailsView control, the ItemInserted event would happen before the database operation?
View 1 Replies
Jul 6, 2010
I have a query that, when run in SQL Server Mgmt Studio query analyzer window, completes in about 5 seconds. However, when I attach this query to a table adapter in visual studio and try to preview the data, I get an error that says:"Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."Please note, the dataset was successfully configured using the TableAdapter Configuration Wizard, so there didn't appear to be any syntax errors with my query. Also note that I have other datasets connecting to the same database that are working as expected, so it doesn't appear that it would be an issue with the server not responding. Does anyone have thoughts on what kinds of things, other than a query taking too long to run, that could cause this specific error?
View 1 Replies
Jul 2, 2010
I am trying to add some code that logs to a table the time a page has taken to generate, from the request coming in to the response given back. The easiest way to do this is through our master page as it can add the timings of every page.Where I'm a little unsure, is when to put the start and end timings.Currently, I set the start time in the page.unload and the end time as the last part of the page.load on the master page.The figures coming back seem ok, but I'm not sure if I am picking the earliest and latest possible times to get my timings?
View 2 Replies
Jan 11, 2011
I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
View 2 Replies
Sep 3, 2010
I have a vb.net web application in visual web developer 2008 with a dll file and i need to debug a method in that dll. I also have project source files for the dll file itself. How could i make the web application use the source instead of the dll file so that i'd be able to debug it? I've tried debugging the dll project itself, but it's not a very good solution, because it seems the dll depends on the web application settings and data and it would simply be too much work to get it working.
View 1 Replies
Mar 1, 2011
I tried to running a website in debug more (F5), and I get the following error message. Note, that I am using a local IIS 7 server on windows 7 64 bit machine.
How can I get the debugger to work?
View 1 Replies
Jul 21, 2015
I have an SMTP contact form here URL...contact that is just not working. I have checked twice with my Web hosting service about SMTP credentials and all is fine. I have asked three other people to check my SMTP code and each tells me the code works on their servers (gmail, for example).I have started to debug my code and get an unrelated JS error which, I am told by one JS top dog, is irrelevant to the form problem I have.
I assume, therefore, that the problem lies deep in the code. In order to debug it, do I just select each file from App_Code, bin, Scripts, etc, - the whole Solution Explorer - and select Debug?
View 39 Replies
Mar 3, 2010
Yesterday I've installed IE8 but now my debugging and breakpoints does not work in VS 2005! How can I make it work again? Is it a special browser setting?
View 2 Replies
Jun 24, 2010
First of all, this is my first attempt at a silverlight app and it's a prototype. I have a pre-existing solution with multiple projects. One of those projects is a web portal that has a services directory and publish a .asmx. I added the silverlight app to my solution.When I run the silverlight prototype, it gives me the message: "The silverlight project you are about to debug uses web services. Calls to the web service will fail unless the silverlight project is hosted in and launched from the same web project that contains the web service." That's fine. How do I do that? When I run the silverlight app directly, it runs in the browser as
"C://file/.../PrototypeTestPage.html"
I tried taking that HTML file and adding it to my portal and then navigating to the HTML file. That just gives me a blank page. After the page loads, the browser shows a "Waiting for localhost..." as if it's making the service calls, but my breakpoints on the service calls aren't being called. Can someone give me some pointers?
View 1 Replies
Jan 7, 2011
If I have a dll in bin (in a dev environment) that I need to debug and the dll doesn't currently have its associated PDB file in bin, what's the best way to get the PDB file into bin (if I have the source code of the dll)? Will it work to just copy the PDB to bin, or if I re-add the reference to the source dll through visual studio will that also bring in the pdb?
View 1 Replies
Nov 2, 2010
I've tried to debug sample ASP.NET and ASP.NET MVC applications in MonoDevelop 2.4 (on Mono 2.8 on Windows 7) but breakpoints doesn't work.If debugging MVC Application MonoDevelop prints the following into the output:
Mono.Debugger.Soft.VMDisconnectedException: An exception of type "Mono.Debugger.Soft.VMDisconnectedException" thrown.
at Mono.Debugger.Soft.Connection.SendReceive(CommandSet command_set, Int32 command, PacketWriter packet)
at Mono.Debugger.Soft.Connection.Type_GetInfo(Int64 id)
[code]...
View 2 Replies
Feb 11, 2010
is it possible to debug an ASP.Net-Website with a post-request and post parameters? Visual Studio 2010 only debugs withGET and no parameters and I wasn't able to find any option about this.
View 1 Replies
Feb 12, 2010
I am having real trouble with a site I have to change that uses urlrewritingnet. The site works great when I run it in IIS however when I run it in VS2008 the pages have no CSS or JS. This is a real pain as it relys heavily on JS and I cannot debug without it.Would it be better just to turn urlrewritingnet off when working in VS? if so how would I go about it?
[Code]....
View 4 Replies
Jun 16, 2010
When I try to start my application in debug mode (F5), 1 out of three times IE opens with a blank screen, and Visual Web Developer says it cannot start the application. Sometimes it also says "Element not found". I can only shut down IE by using the task manager.
View 6 Replies
Oct 28, 2010
My webpage contains :
I did a break points on the Tools.JS , but while debugging I didn't found my JS in Script Documents (Run Time mode) , and i remarked the exclamation message on my BP saying that this break point willn't be take in mind cause the JS document isn't charged.
My question is : Is there another way to load a JS to be available in the debugging mode? and how could i debug my JS in this case ?
View 3 Replies
Jun 29, 2010
How to debug a web service localhost after hosting the webservice in IIS
i am not able to find a solution how to debug a web service locally . ie
i am not able to put a breakpoint in afterdeserialize and before serialize method
can any provide a sample code..
Any help
View 6 Replies
