IIS7 Web.config Rewrites To Restrict Access For IP Range - Can't Get It To Work?
Mar 21, 2011
I'm simply adding to a set of rules on existing rewrite rules for our company website. We have a file that we need to restrict to only our internal IP addresses. The URL is http://oursite.com/internal/index.aspx?u=blahblah and need it restricted to IP ranges 10.1.X.X. I'm adding this and it's not doing anything. Even if I tried to capture all using .* for the pattern, it still ignores it. Is my syntax correct?
<rewrite>
<rules>
...
<rule name="Restrict URL" enabled="true" stopProcessing="true">
[code]...
View 1 Replies
Similar Messages:
Jun 10, 2010
I am deploying a public ASP.NET website on an IIS7 web farm.
The application runs on 3 web servers and is behind a firewall.
We want to create a single page on the website that is accessible only to internal users. It is primarily used for diagnostics, trigger cache expiry, etc.
/admin/somepage.aspx
What is the best way to control access to this page? We need to:
Prevent all external (public) users from accessing the URL. Permit specific internal users to access the page, only from certain IPs or networks.
Should this access control be done at the (a) network level, (b) application level, etc.?
View 3 Replies
Jun 14, 2010
I need to restric access to my admin folder to certain people. Those with no authentication ticket should be redirectered to a "not allowed page". How do I identify all pages in my admin folder. I have so far but is it OK?
If url.Contains("/admin") Then
'If authentication ticket incorrect then
`Response.Redirect("~/notallowed_admin.aspx")`
End If
And not, I cannot use my web.config for this particular issue.
View 2 Replies
Aug 19, 2013
I am upload the Pdf Files And Save in Folder But any one easily open this folder
http://localhost:8748/Lib/Admin/Files/ like that
And see all the uploaded pdf and click any pdf open this pdf
like that
http://localhost:8748/Lib/Admin/Files/Asp.net_Interview_Questions_and_answers.pdf
So this URL cannot be open what I can restrict this URL .....
View 1 Replies
May 11, 2010
We had some content restructure recently and I'd like to put in some redirect rules into web.config so bookmarks to the old pages can get routed to their new locations/pages.I tried using this approach:
<location path="~/product/productA.aspx">
<system.webServer>
<httpRedirect enabled="true" destination="~/product/category/productA.aspx" exactDestination="false" childOnly="true" httpResponseStatus="Permanent" />
</system.webServer>
</location>
But all I'm getting when I go to "[URL] is our http 404 page.Am I doing something wrong, or is the httpRedirect tag in web.config not supported in mono?
View 1 Replies
Apr 18, 2010
i am building a member management site for a sports club, i have all the usual feilds
lastName, firstName, address1, address2, address3 ....
but they also want a photo
when i first made the DB i used access 2010 which uses the 2007 file type which supports attachments, however asp.net doesnt support the 2007 format. and the 2003 file type doesnt support attachments, i assume i use the OLE object data type but i have no idea how i get my aspx page "new.aspx" to upload an attachment. plus i want to restrict the file type to *.jpg
View 1 Replies
Apr 27, 2010
I have an Access DB that generates reports for my users based on the month from a SQL table. In February my team leads didn't run the report and now it only shows data for the month of April. I have tried to play with the date code to pull just the February data but with no luck, I know this is a simple change but I can't figure it out.
[Code]....
View 1 Replies
Nov 28, 2010
We are working on a web application that creates more web applications.Each web application will have to get a Url Rewrite rule (URL REWRITE MODULE 2.0).As far as I know, there's no way to add such rules without modifying the web.config file (am I right??).So my plan was to work with multiple web.config partial files. One main .config file, and lots of .config files per application (every file will contain it's web application url rewrite rules).This way sounds a little bit messy, but I can't think of anything else, and suggestions will be welcomed.
View 1 Replies
Feb 4, 2011
I need to get the mime types in an IIS7 environment. They should be in:
<configuration>
<system.webServer>
<staticContent>
<mimeMap...
As I understand it, in IIS7 if I can get to it I should see both custom additions in my web.config as well as the mime types defined in the IIS manager at the machine level.
I don't understand how to get to this data. I have messed with the configurationmanager but I am not getting anywhere. I can get a section names system.webServer but I don't see any of the actual data as colleciton of properties or as xml.
View 1 Replies
Jan 11, 2011
I am trying to port an existing ASP.Net 1.1 website to another web server that currently runs IIS7 and a number of websites that target either .Net 2.0, 3.5 or 4.0. All other sites continue to work perfectly. Unfortunately, I can only browse static files on the newly imported site. If I try to access any of the Features in IIS7 for the new sit
View 1 Replies
Nov 20, 2010
I am using a project that rewrites URL. I am not familiar with this code, but it works fine on IIS 6 and with VS2010. Problem begins when I need to deploy into IIS7.5 server. Seems like the rewrite doesn't work and the page doesn't fount after rewriting page.
[Code]....
I am trying to use this web.config code, but then I could see this:
[Code]....
View 1 Replies
Jul 21, 2010
Okay I've read the other StackOverflow postings, forum posts on MSDN, everywhere. I CANNOT get this to work for the life of me.
Here is what I have setup.
In IIS7.0
- Default Site in ASP.NET v4.0 App Pool
- C:Inetpubwwwroot as the physical path
I published my MVC2 site in VS2010 to the Default Site path, it succeeded.
Here are the settings for that:
- Same App Pool
- C:InetpubwwwrootPerfectSchedule as the physical path
- Default Document is Views/Home.mvc
I open the URL in my IE browser
- http://localhost/ --> just gives me the Apache "It works!" page
- http://localhost/PerfectSchedule --> The WebPage cannot be found
- http://perfectschedule/ --> Internet Explorer cannot display the webpage
View 2 Replies
Dec 8, 2010
I am trying to secure an application in IIS7 using .NET Authorization Rules.
By default, the web server allows all users access (which is inherited).
I have added, just for this one application directory, a deny all users command, as well as an allow command for specific users.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.web>
<authorization>
<allow users="myusername" />
<deny users="*" />
</authorization>
</system.web>
</configuration>
I have Windows Authentication enabled, and I can verify that without the line that my REMOTE_USER is MYDOMAINmyusername.
However, when I try to deny all users, I am prompted with the typical Windows domain username/password box. If I enter the username password, the prompt comes back up again 3 times until finally presenting me with a failure message. (I have also tried to no avail)
Looking in the event viewer, it appears as if my login using the username and pw is successful in the audit ... and to further that point, my account is not being locked out (which it would if I were failing to login over and over). So it's as if I am logging in, but the configuration is not seeing what I entered as matching my login.
Below is the message I see (even when connecting from the server using localhost):
**Access is denied.
Description: An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL.
Error message 401.2.: Unauthorized: Logon failed due to server configuration. Verify that you have permission to view this directory or page based on the credentials you supplied and the authentication methods enabled on the Web server. Contact the Web server's administrator for additional assistance.**
View 2 Replies
Oct 19, 2010
I have a web.config file which is quite large in my current solution running on IIS7.
It's working perfect on my dev server however I encounter the error 0x80070032 "Config Error Cannot read configuration file because it exceeds the maximum file size"
My current solution uses a very large web.config file. The architecture of my CMS application requires a large number of configuration settings.
Is there some way to extend this size limit or can I split the web.config file down into smaller files?
View 1 Replies
Feb 15, 2011
How can I Restrict Access to an specific folder, for example I have a folder that Authenticated users upload different files in it. the problem is that every user can access the files via URL in the browser.I don't use asp.net login controls for authenticating and role memberships, I have written login page and roles my self via code behind.
View 1 Replies
Aug 24, 2010
I want to be able to restrict page access in a web application deployed in IIS 6.0. Say my web applications has these pages:
a.aspx
b.aspx
c.aspx
d.aspx
The proper way to access is [URL]" From a.aspx the other aspx pages could be loaded. What I want to be prevent is someone typing in: [URL]
View 2 Replies
Feb 27, 2011
I get a website working perfectly in VS2008 but when I publish it on IIS7 ajax doesn't work at all.I guess it is a problem in my web.config but I don't know what. Here is the web.config file :
[Code]....
View 4 Replies
Nov 25, 2010
I have a config file linked from web.config e.g.<features configSource="feature.config" />When I make changes to the "feature.config" file the IIS application appears to restart, is this expected behaviour?
View 1 Replies
Nov 10, 2010
I currently have 2 x ASP.NET 3.5 web applications in IIS7 (lets call them WebParent and WebChild).WebChild is nested within the WebParent listing in IIS7 and is set up as an application (rather than just a virtual directory within WebParent). Both currently use their own (Classic) application pool.Both WebParent and WebChild have their own fully defined web.config files in their own root directories.
View 3 Replies
Jan 17, 2010
How can i prevent users from getting the list of files that exist in my website?
For example when users type on the address bar the WebsiteAddress+/DirectoryToSearch/ they get the list of files in that directory, without getting any permission denied error
Is there any setting in asp.net that am i missing?
View 1 Replies
Jan 23, 2010
[Code]....
Trying to restrict access to folder but can't?
View 6 Replies
Mar 29, 2011
I need a reliable method to switch off users' access to SSRS dynamically. If you care about the reason, users are not allowed to access SSRS from home, but they are allowed access from within the factory walls.
I can generate a token or event when they arrive at work or leave, no problem, such is the sophistication of our security system.
So I can create a little .net app that pokes SSRS in some way and tells SSRS to allow that username to access reports. When the users leaves the premises, the .net app will prod SSRS to deny that username access.
I considered dynamically adding and removing usernames from the authentication section of web.config in the SSRS root dir, as in <deny=usernamelist />. But given the frequency of changes (dozens per hour at peak times), that seems too intrusive, as it probably causes the restart of the app.
I tried adding usernames to the ACL on the SSRS physical directory (Microsoft SQL ServerMSSQL.2Reporting ServicesReportServer) as deny reader, and for a few brief minutes I thought I had arrived at a solution, but for some reason SSRS decided to serve pages to denied users seemingly at random. Must be cached somewhere, although I can't for the life of me figure out why that would be happening seemingly at random.
I rather like the ACL idea from the perspective of ease of control, and if there's a simple thing i have overlooked in the way SSRS interacts with IIS and NTFS permissions, I hope someone can point it out so I can understand why the ACL seems to be mostly ignored.
View 1 Replies
Oct 13, 2010
I want to secure a particular set of files in a folder by role type. I have the following entry (See below)...I notice this doesn't work (I.e., it doesn't secure the file by Role Type.. anyone can access the file). I've read that I need to map the .WMV extension to the ASp.Net DLL.
[Code]....
View 10 Replies
Sep 23, 2010
How to restrict folder access in asp.net like i dun want any other to see my Uploads folder in browser by link http://www.myweb.com/Uploads
View 3 Replies
Apr 2, 2010
The application is hosted in Windows Server 2008 with IIS7.
I have a button that calls a new webpage (asp.net page, ext .aspx) that contains
Response.OutputStream.Write(blahblahblah) which then should prompt a download box to allow user to save an image.
Now the page basically creates a stream and then is supposed to output the stream to the user using Response.Outputstream.Write.
Then the user is supposed to be prompted to open or save the document. This works fine in Firefox but it does not work with IE7 or 8
Also this exact same code works with IIS6 on a Windows 2003 server.
So the only differences is the IIS6 and Windows 2003 Server to IIS7 and Windows 2008 Server.
And what happens is when I clicked the button, the page did pop up but disappear 1-2 seconds later without
prompting the download box to the user.
Here is the code that launches for Reference
//e.g file = 123424_43535.jpeg
FileInfo myFile = new FileInfo(Server.MapPath("mapImage/") + file;
using(var fs = myFile.Open(FileMode.Open, FileAccess.Read))
{
byte[] buffer;
int read;
buffer = new byte[(int)fs.Length];
Response.AddHeader("Content-Disposition", "attachment;filename=" + file);
Response.ContentType = "application/x-force-download";
Response.AddHeader("Connection", "Keep-Alive");
Response.AddHeader("Content-Length", fs.Length.ToString());
while((read = fs.Read(buffer, 0, buffer.Length)) > 0)
{
this.Response.OutputStream.Write(buffer, 0, read);
}
}
Response.End();
I have tried to replace Response.AddHeader with Response.AppendHeader, however the result is still the same. Also, I have tried to replace the Response.ContentType with application/octet-stream and image/jpeg, I also faced the same result.
Is there any setting/modification on server/code that I need to look on?
View 13 Replies
