Configuration :: Get Mime Type For Web.config, Iis7?
Feb 4, 2011
I need to get the mime types in an IIS7 environment. They should be in:
<configuration>
<system.webServer>
<staticContent>
<mimeMap...
As I understand it, in IIS7 if I can get to it I should see both custom additions in my web.config as well as the mime types defined in the IIS manager at the machine level.
I don't understand how to get to this data. I have messed with the configurationmanager but I am not getting anywhere. I can get a section names system.webServer but I don't see any of the actual data as colleciton of properties or as xml.
View 1 Replies
Similar Messages:
Sep 10, 2010
I added a could of new MIME types to IIS7 per the instructions. I also modified an existing one.
On my browser, I still see the 'old' MIME type of the modified one.
Tried iisreset, app pool recycling, etc.
COuld there be some .config file somewhere affecting this?
View 2 Replies
Nov 12, 2010
I am not sure if I have found the right forum for this one.
the problem is:
I have a .licx file in my rootfolder.
I am getting the error:
Error 53 Unable to resolve type ' <add type="TabStrip" version="7.0" />' C:inetpubwwwrootCrop_ApplicationCrop_Applicationeo_web.licx 7 Crop_Application
,which I get for all the types that are in the xml file(i just gave one of them).
A friend told me that I have to add the type .licx in the MIME type in the IIS .
The problem is that I find the MIME type, I add the extension type .licx but I do not know the MIME type for .licx
View 1 Replies
Nov 20, 2010
I am using a project that rewrites URL. I am not familiar with this code, but it works fine on IIS 6 and with VS2010. Problem begins when I need to deploy into IIS7.5 server. Seems like the rewrite doesn't work and the page doesn't fount after rewriting page.
[Code]....
I am trying to use this web.config code, but then I could see this:
[Code]....
View 1 Replies
Oct 25, 2010
In IIS7 I don't find any possibility to keep a website from responding to it's IP address as soon there is SSL set up for this website. I did not add the IP address as hostname for this website and so would expect that the site does only respond to it's given hostname(s). Unfortunately the website won't work if requested via it's IP address, so I have to disable IP address as hostname somehow.
Another issue is that IIS 7 does not display the "secure connection obligatory" error page anymore if secure connection is mandatory for a website. Is there any way to get this error page being displayed, just like it was in IIS6 ?
View 3 Replies
Jan 11, 2010
Currently my IIS is serving CSS files with no Content-Type header. How to change it? Should I change it on my application or in the server?
View 1 Replies
Jul 22, 2013
When inserting a binary file do you know what will be the correct content type for extensions like .txt or .gif or others not in your sample? Is there a list of correct content types?
View 1 Replies
May 13, 2010
I want to add mime type in web.config to make downloading files for users.but after adding mime tag, website starts showing internal error 500 and removing this, it runs fine but when user click on files to download then it show error that file not found. So I need to add proper mimetype for my uploaded files. So pls tell me the proper way to add it to web.config file.
View 3 Replies
Mar 8, 2010
I would like to have a different connection string when I deploy the web application, without manage my web.config anytime.How can I do that?
View 2 Replies
Jan 25, 2011
I created a script for Internet Explorer which can be installed using GM4IE (Greasemonkey for Internet Explorer) and it has the extension .gm4ie.
When I try to give the download link to this file on my server, it gives this error: [URL]
page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
How do I add this this handler or a mime map and where do I add this?
View 1 Replies
Nov 28, 2010
We are working on a web application that creates more web applications.Each web application will have to get a Url Rewrite rule (URL REWRITE MODULE 2.0).As far as I know, there's no way to add such rules without modifying the web.config file (am I right??).So my plan was to work with multiple web.config partial files. One main .config file, and lots of .config files per application (every file will contain it's web application url rewrite rules).This way sounds a little bit messy, but I can't think of anything else, and suggestions will be welcomed.
View 1 Replies
Jan 11, 2011
I am trying to port an existing ASP.Net 1.1 website to another web server that currently runs IIS7 and a number of websites that target either .Net 2.0, 3.5 or 4.0. All other sites continue to work perfectly. Unfortunately, I can only browse static files on the newly imported site. If I try to access any of the Features in IIS7 for the new sit
View 1 Replies
Feb 19, 2011
i have my own cloude server. with iis7(OS:window server 2008) . i want to deploy my webApplication on that can u tell me best configuration of iis7 and webconfig file for my application.
View 3 Replies
May 6, 2010
There is any difference between application/x-javascript and application/javascript mime type?
View 3 Replies
Dec 8, 2010
I am trying to secure an application in IIS7 using .NET Authorization Rules.
By default, the web server allows all users access (which is inherited).
I have added, just for this one application directory, a deny all users command, as well as an allow command for specific users.
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.web>
<authorization>
<allow users="myusername" />
<deny users="*" />
</authorization>
</system.web>
</configuration>
I have Windows Authentication enabled, and I can verify that without the line that my REMOTE_USER is MYDOMAINmyusername.
However, when I try to deny all users, I am prompted with the typical Windows domain username/password box. If I enter the username password, the prompt comes back up again 3 times until finally presenting me with a failure message. (I have also tried to no avail)
Looking in the event viewer, it appears as if my login using the username and pw is successful in the audit ... and to further that point, my account is not being locked out (which it would if I were failing to login over and over). So it's as if I am logging in, but the configuration is not seeing what I entered as matching my login.
Below is the message I see (even when connecting from the server using localhost):
**Access is denied.
Description: An error occurred while accessing the resources required to serve this request. The server may not be configured for access to the requested URL.
Error message 401.2.: Unauthorized: Logon failed due to server configuration. Verify that you have permission to view this directory or page based on the credentials you supplied and the authentication methods enabled on the Web server. Contact the Web server's administrator for additional assistance.**
View 2 Replies
Oct 19, 2010
I have a web.config file which is quite large in my current solution running on IIS7.
It's working perfect on my dev server however I encounter the error 0x80070032 "Config Error Cannot read configuration file because it exceeds the maximum file size"
My current solution uses a very large web.config file. The architecture of my CMS application requires a large number of configuration settings.
Is there some way to extend this size limit or can I split the web.config file down into smaller files?
View 1 Replies
May 11, 2010
We had some content restructure recently and I'd like to put in some redirect rules into web.config so bookmarks to the old pages can get routed to their new locations/pages.I tried using this approach:
<location path="~/product/productA.aspx">
<system.webServer>
<httpRedirect enabled="true" destination="~/product/category/productA.aspx" exactDestination="false" childOnly="true" httpResponseStatus="Permanent" />
</system.webServer>
</location>
But all I'm getting when I go to "[URL] is our http 404 page.Am I doing something wrong, or is the httpRedirect tag in web.config not supported in mono?
View 1 Replies
Mar 21, 2011
I'm simply adding to a set of rules on existing rewrite rules for our company website. We have a file that we need to restrict to only our internal IP addresses. The URL is http://oursite.com/internal/index.aspx?u=blahblah and need it restricted to IP ranges 10.1.X.X. I'm adding this and it's not doing anything. Even if I tried to capture all using .* for the pattern, it still ignores it. Is my syntax correct?
<rewrite>
<rules>
...
<rule name="Restrict URL" enabled="true" stopProcessing="true">
[code]...
View 1 Replies
Nov 25, 2010
I have a config file linked from web.config e.g.<features configSource="feature.config" />When I make changes to the "feature.config" file the IIS application appears to restart, is this expected behaviour?
View 1 Replies
Nov 10, 2010
I currently have 2 x ASP.NET 3.5 web applications in IIS7 (lets call them WebParent and WebChild).WebChild is nested within the WebParent listing in IIS7 and is set up as an application (rather than just a virtual directory within WebParent). Both currently use their own (Classic) application pool.Both WebParent and WebChild have their own fully defined web.config files in their own root directories.
View 3 Replies
Feb 9, 2010
I have a simple web site with two pages. One displays a list of files, and the other streams a file when it's clicked in the list. All was fine in production for 6 months, but now I have to move the site to Windows 2008/IIS7. I have it mostly working, but the files don't open properly (in Firefox) because my content-type header is being ignored. On the production site (IIS6) the headers are (using Fiddler):
HTTP/1.1 200 OK
Date: Tue, 09 Feb 2010 16:00:51 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
X-AspNet-Version: 2.0.50727
Content-Disposition: attachment; filename="myfile__foo.pdf"
Content-Length: 236841
Cache-Control: no-cache, no-store
Pragma: no-cache
Expires: -1
Content-Type: application/octet-stream
but on the test IIS7 server I get:
HTTP/1.1 200 OK
Cache-Control: private
Content-Length: 236841
Content-Type: text/html; charset=utf-8
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
Content-Disposition: attachment; filename="myfile__foo.pdf"
Fiddler also reports a protocol violation and says "Content-length mismatch: Response Header claimed 236841 bytes, but server sent 238378 bytes."
My code looks like this:
[code]....
View 1 Replies
Mar 3, 2010
I have a custom implementation of Application_PreRequestHandlerExecute which is applying a deflate/gzip filter to the response. However, on IIS7, this is failing on my "script generator" pages. These aspx pages take in Query String values and return a custom bit of script, changing the response type to text/javascript. I think it is failing because of the way iis7 uses mime types, but I'm unsure how to fix it short of turning all compressio off.
View 1 Replies
May 3, 2010
I have deploy my web site, it contains a project!
in MyWeb there are all the aspx page and some entites datamodel, in MyApp there are the class with function like "getter data from DB" and there is a entity data model.
afeter the deploy, I have only the web.config and the connection string for the entity datamodel....itīs run ok, read/write the data on the DB.
The problem is with MyApp.....after the deploy it is a dll file and I donīt have the app.config and the entity inside it donīt run, not read/write nothing on the DB.
There arenīt error or messager but not read/write the data in the MyApp project.
all run on the iis 7
now...the question is:
I lose the connection string (in app.config) after the deploy?
Can I put a entity in the MyWeb and read it in another project (myApp)?
ps: for connect to DB I use not the c# code:
var db=from x in AccessDB.Example select x;
View 1 Replies
Jan 5, 2011
I am developing web applicaiton. I want to read web.config in App.config file. I have appSettings and connectionStrings in web.config. How to read that?
View 10 Replies
Apr 15, 2010
I got this error and do not know how to solve it.
I've got a subweb as application. It's called ADMIN. It works fine when running locally but when deploying in the development web server, i got the error: Unable to cast object of type 'System.Web.HttpApplication' to type 'Microsoft.Practices.CompositeWeb.WebClientApplication'
I've got a App_global.asax.dll and App_global.asax.complied on the subweb folder Admin.
View 1 Replies
