I am trying to run a website on iis7, it was working fine untill i tryed to install isapi rewrit on iis7. when i go to localhost i get the 404 message and when i type localhost/Default.aspx i get the default page but the css is not applyed to the page. i tryed to uninstall /install iis but the settings remain the same. how can i install iis with default settings.
i was following this instructions.
[URL]
Just got a new dev machine and am having trouble with this piece of code in our project. I have set folder permissions to give Network Service read/write accessFor dev, this is being ran locally on IIS 7.5. IIS Authentication settings are Forms Authentication and Windows Authentication enabled.I am getting a permssions error when the xml is written to the local hard drive.
PDFGenerator pdfGenerator = new PDFGenerator();
DataSet dataSet1 = pdfGenerator.GenerateDataSet(Parameters, xmlFilePath);
outputXmlFile = Guid.NewGuid() + outputXmlFile;
[code]...
I am working on the migration of the server. Our new server is Windows server 2008 with IIS7.0 I have a great difficulty in browsing the pages hosted in virtual directories. I have followed the proper steps of creating a virtual directories and converting them into applications. But when i try to browsing the pages of the virtual directory, i get the 404 error. Note: The .Net Framework 4.0 is installed on the server and the web applications which i am trying to configure in the virtual directories are developed in Visual Studio 3.0. Even the http://localhost also don't work.
View 9 RepliesI have an ASP.NET 2.0 web site hosted on Windows Server 2008 with IIS 7. I am using InProc session mode (specified in web.config). My client wants the timeout to be of 3 hours, meaning if the web site is idle, session should remain alive for 3 hours. Currently, what is happening is that if the web site is idle for 20-30 min. and if the user to tries to access any link, it redirects to login page.
I searched on internet and did all the possible settings (as follows):
In web config, session state, time out = 180 minutes.
In web config, forms authentication, time out = 180 minutes.
In IIS 7, Site->Features View->Session state - Session State Mode Setting: In Proc and Cookie Setting->Time out = 180 minutes
In IIs 7, Site->Features View->ASP->Services->Session Properties->Time out = 03:00:00 hours
In IIS 7, Application Pools->Site->Advanced Setting->Process Model->Idle Time-out = 180 minutes.
Even after doing all these settings, timeout has not increased and still if the web site is idle for 20-30 mins. and user tries to access the link, it redirects to login page.
Additional Information:
Whenever it redirects to login page after idle of 20-30 mins., and if I check the event log on server, it says something like (I am not sure whether this error is related to this particular issue or not):
"Forms authentication failed for request. Reason: The ticket supplied has expired"
I have created .msi and .exe installer for one website. I now want to install this on Windows server 2003 with IIS 6. As the installation is on a already existing site on IIS I want the installer to remove all the exisitng files but retain the IIS settings of the already existing site(such as default document and directory security).
View 1 RepliesI've encountered a problem while installing Visual Studio 2010 on Windows 7, I've tried to modify the privileges of the destination folders to no avail, I've also tried to delete everything related to it with a removal tool. The problem is that the installation is always unsuccessful at the same point, providing me a Blue Screen of Death (twice) and the following error message (infinite amount of occasions):
[Code]....
Does anybody know the cause of the error? Is there an easier and less time consuming solution than reinstalling the whole system?
Firstly there's a great overview of the IIS7 HTTP request lifecycle and various settings that affect performance here:
ASP.NET Thread Usage on IIS 7.0 and 6.0
Very specifically though, in dotNet 4 the defaults for maxConcurrentRequestsPerCPU and requestsQueueLimit are set to 5000. E.g. equivalent to: (in aspnet.config):[code]....
Seems to me that on a multi-CPU/core server the requestQueueLimit here will always be invoked well berfore the 'perCPU' limit. Thus, if a max of 5000 requests per CPU is what you actually want then I would expect that the requestQueueLimit needs to be increased to 5000 * CPUCount or just disabled altogether.
Is my interpretation correct? If so can I disable requestQueueLimit? (set it to zero?). The documentation on this setting doesn't appear to address this question (so maybe I'm missing something or misreading?)
** side note from the above article: The requestQueueLimit is poorly named. It actually limits the maximum number of requests that can be serviced by ASP.NET concurrently. This includes both requests that are queued and requests that are executing. If the "Requests Current" performance counter exceeds requestQueueLimit, new incoming requests will be rejected with a 503 status code)
I just downloaded and installled the Microsoft Windows Azure SDK yesterday for the first time and I am having issues running the application as I all I am getting is 503 errors. I run Windows Server 2008 R2 on my development machine and even tested it on another co-workers 2008 R2 and couldn't even compile the application. He got this error instead "A problem occurred while trying to set the "References" parameter for the IDE's in-process compiler. Error HRESULT E_FAIL has been returned from a call to a COM component."
From within my Windows Server 2008 R2 Hyper-V Virtual Windows 7 x86 enviroment, I was able to successfully build and run the Windows Azure SDK and it even showed the base ASP.NET application.So my question is, does the Windows Azure SDK for Visual Studio 2010 w/ Visual Studio 2010 SP 1 installed not work under Microsoft Server 2008 R2?
In our IIS (v 6.0) there is one classic ASP app deployed, which has around 35 concurrent users. Now, a new ASP.NET(3.5) app needs to be deployed on the same server which will have its own 50 concurrent users. In this scenario should we create a Application Pool for this new .net app? What are other recommendations for the IIS settings in future?
View 3 RepliesWe have a website portal hosted in Windows 2003 server. For security reasons we are using different windows Login user say (xxxx) for signin other than Administrator. Now with this user (xxxx) name I installed .net Windows Application. It was working fine. For some reasons I renamed the original windows Login user(xxxx) to different say (yyyy). Now this .net Windows Application is not working with (yyyy) and even it is not allowing me to uninstall it.
View 3 RepliesI am developing new WCF service application and hosting it into IIS7 and Windows 7 Professional. I am able to successfully compile the service, but whenever I try to browse service (.svc file) in browser I am getting following error.HTTP Error 404.3 - Not FoundThe page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.I looked at both following post but no luck....http://learn.iis.net/page.aspx/472/how-to-install-aspnet-11-with-iis7-on-vista-and-windows-2008
View 1 RepliesI'm trying the above - Visual Web Developer 2008 express edition with SQL Server 2005 express using VB code behind on ASP.net 3.5 framework. I need to incorporate and amend some externally supplied classic asp pages, so switched to local IIS7 for compilation/run. I can run these pages, but am unable to amend them and have the changes reflected in what I see. Is this possible with this setup? Is there a configuration setup that I may need? Has anyone successfully done the above before?
View 2 RepliesI am evaluating ASP.NET Membership for an intranet Silverlight app. I want users to be automatically authenticated for my application with their windows logon. Thus I configured Windows Authentication. I would like to store user settings like email-address in using the SqlMembershipProvider and not AD. It seems that storing user settings using the SqlMembershipProvider is not supported with Windows Authentication. Is this really so (using .NET 4)?
If so: What is the rationale behind this? IMHO authentication, user settings and authorization are distinct aspects. User settings could easily be stored (identified by user name) using the SqlMembershipProvider with authentication and password management being supplied by Windows. What is the recommended solution for my scenario?
I have an application that ran fine on a Win 2003 box using windows authentication. After installing the app on a 32-bit Windows Server 2008 box the users are now prompted for domain credentials every time they call the site. I went into IIS manager for IIS7 and disabled anonymous authentication and enabled windows authentication. What do I need to do here for the user to not be prompted for the credentials?
View 5 RepliesOlder machine (2 years), Visual Studio 2008 SP1, Windows 7.
Error message when trying to open previously created mvc2 web app on IIS through Open Web site > Local IIS
"Unable to open the Web site "htpp://localhost/websitename" To access local IIS Web sites you must install the following IIS components:"
(no items on list)
then the open in admin mode notice.
I have tried everything I have found on the internet for 3 days.
I've got an ASP.NET web app that uses Crystal Reports XI Release 2 (Service Pack 4 + Fix Pack 4.1), and when I use Windows Authentication, the report still passes the application pool identity to the database instead of the user's identity. Every other portionof the program sends the user's identity (checked using SQL profiler). I know I've gotten this working on a client's windows 2008 server before, but I don't have access to that machine to make a comparison with the one I'm working on. I'm pretty sure it's an IIS configuration issue, but I can't seem to find the thing that's causing the Crystal reports to behave differently from the rest of the application.
View 2 RepliesIve recently got a new development machine with windows 7 64 bit. On loading up a website and opening default.aspx, the whole ide just freezes. Nothing responds, I have to shut it down from the task manager. This happens every time (ive tried it 4 times so far)The site was fine on my old machine (windows xp 32 bit) are there any compatibility issues with windows 7 64 bit and vs 2008 ?
View 7 RepliesCan I use .Net Framework 4 with IIS 5.1 and Windows XP?
View 2 RepliesI have a website deployed on IIS 7 . And want one of my pages authenticated by windows authentication. But While trying this I am getting error "This feature has been locked or Read Only".
View 1 Repliesmy ASP.NET web application uses windows authentication on our intranet. I want it to be able to make a server-side http request to another server on the same domain that also requires windows authentication. I've followed the instructions on temporarily impersonating the authenticated user when making the additional request here: [URL] Using code like this:
using System.Security.Principal;
// Obtain the authenticated user's Identity
WindowsIdentity winId = (WindowsIdentity)HttpContext.Current.User.Identity;
WindowsImpersonationContext ctx = null;
try
{
// Start impersonating
ctx = winId.Impersonate();
// Now impersonating
// Access resources using the identity of the authenticated user
var request = WebRequest.Create("http://intranet/secureapp");
request.Credentials = CredentialCache.DefaultCredentials;
var response = request.GetResponse();
using (var streamReader = new StreamReader(response.GetResponseStream()))
{
Response.Write(streamReader.ReadToEnd());
}
}
// Prevent exceptions from propagating
catch
{
}
finally
{
// Revert impersonation
if (ctx != null)
ctx.Undo();
}
// Back to running under the default ASP.NET process identity
But, unfortunately, I always get a 401 unauthorized error. Do I need to configure our webserver with active directory to allow it to delegate the autenticated user (could be any one of about 200 users, so don't want to have to do anything 200 times :))? If so, can anyone tell me how to do this?
i am developed windows based application as well as web based application,but now what i want is after logging into my web application only,the windows application will open and run.first how to create single setup for both application .
View 2 RepliesIn windows XP when we install IIS after asp.net 2005 then we have to register asp.net in IIS by executing one command - "aspnet_regiis.exe -i".
here in vista I have done same thing -> installed iis after asp.net
Executed above command but it is not recognized command so I searched google and got command -> aspnet_regiis.exe -i -enable
here I got message of Installing ASP.net but then got error message.
I have Sqlserver2008 setup. It is work in wndows Xp. But I have to Install it on Windows 7 ,during installation process it requires some patch and I am unable to get it.
View 4 RepliesI have web app written in .net 4.0 using url routing. It works fine in the development environment in VS 2010.But It's not working after publishing to iis7. on remote server i'm getting error HTTP Error 404.0 - Not FoundThe resource you are looking for has been removed, had its name changed, or is temporarily unavailable. I tried in virtual directory and it's not working.[URL]
View 1 RepliesHere is what I need to know about SSRS/VS2008:
View 5 Replies