I have just installed VS 2010 Professional. After I create a c# web project with default target 4.0, I don't see most items in ajax toolbox. When I try to choose items, CalendarExtender along with other items are not in the list to choose from.Shouldn't those items like CalenderExtender be available by default? Suppose I could manually download the ajax toolkit but is that the right way to fix it?
View 1 Replies
I am using Microsoft Visual Studio 2008 Professional Edition on Windows Vista Home Basic SP2 and when I am editing Visual Basic and want to add an item to the toolbox I click on Choose Items... and from that point I can't find important controls (items) like Windows Media Player or Adobe PDF Viewer. I have tried to reinstall and reset the toolbox and program. I can't find this problem anywhere in the web
View 10 Replieshttp://www.asp.net/learn/Ajax-Control-Toolkit/tutorial-47-cs.aspx
According to the above article you "Unblock" the zip file and then unzip it. You then create a new tab within the toolbox window and add the dll to show and use the toolbox items. However when I do that I'm getting the following:
'Request for the permission of type
'System.Web.AspNetHostingPermissio
I want to add a control from toolbox, choose item but VS2008 close without any error.
How to fix it?
- I am Using VS 10 Professional, Vista Ultimate, Asp.net 4, Mvc 3. Razor View Engine.
- Attempted to install a Third Party , only one, Control "Poll Control" to a project that I am developing.
- However, the third Party installation program downloaded all their controls,that I didn't ask for, created a new folder in the Toolbox and listed all their controls under the heading of the new folder.An intrusive action that I don't need and didn't ask for.
- The Razor engine, that I am using to develop my program, doesn't support Design View and deals only with Source View.
- However, the Third Party's Controls need Design View to be activated. As a result, the installation program appears to have caused the following:
1- All their Controls appeared grayed and unusable in the Toolbox.
2- All other Controls in the Toolbox are grayed as well.
3- I properly un-installed all their Controls as well as their heading, however, all the other Controls are still grayed and unusable.
- This graying out appears only under the " Lazor Engine"
- All the Controls of the Toolbox appear and function properly under "Aspx. engine", Where Design Views are provided.
- I tried everywhere, for about a week,to find a solution without any success. I went as far as un-installing Visual Studio and re-install it again, without any success.
- I Contacted the Third Party Support Department and I received the following response:
" This is not something we will help you with. You will need to contact MS or other resource to find that out. We only support our product, we do not have the in depth knowlege about how Visual Studio works. "
MY PROBLEM.How can I restore the functionality of all the Toolbox Controls?
I have a message in a greyed out with a message.
"There are no usable controls in this group. Drag an item onto this text to add it to the toolbox."
What do I dow with this?
how to add the facebook v4 toolbox items? I tried adding facebook.dll and facebook.web.dll, but VS 2010 is telling me it couldn't find any toolbox items in them.
View 1 RepliesI've encountered a problem while installing Visual Studio 2010 on Windows 7, I've tried to modify the privileges of the destination folders to no avail, I've also tried to delete everything related to it with a removal tool. The problem is that the installation is always unsuccessful at the same point, providing me a Blue Screen of Death (twice) and the following error message (infinite amount of occasions):
[Code]....
Does anybody know the cause of the error? Is there an easier and less time consuming solution than reinstalling the whole system?
I notice when I create a project the common controls menu which includes the webbrowser control is available. When creating a web application in either vb.net or c# the controls are NOT available. Why is this? How can I get them to appear in my web application. I want to use the webbrowser control in vb.net .
View 3 RepliesI am trying to use one of the componets of the WPF Toolkit,[URL] but when I look for the component in my Toolbox it's not there, so when I set the Toolbox to ShowAll, the components are listed but they are grayed out. I right click on the Toolbox > Choose Items and look for the component in my list and ensure that the component is selected, but it still shows up as grayed out. If I turn off ShowAll the components are not listed. How do I get these grayed out components available for use?
View 10 RepliesMy tool box shows the same tools about 12 times. This is for all of them and for all categories. I tried repairing it but it didn't work.
View 6 RepliesI made a UserControl called SliderUserControl which contains two labels and a WebSlider (third party slider control) in a table. The labels left and right of the slider should give the value of the slider and (Maximum - value) of the slider respectively. So if the slider goes from 0-100 and is at 30 now, then the control looks like this:
Code:
30 ----|---------- 70
I accomplished this with some simple javascript, and it's all working just fine:
asp Code:
<%@ Control Language="vb" AutoEventWireup="false" CodeBehind="SliderUserControl.ascx.vb" Inherits="F1TimeTrials.Controls.SliderUserControl" %>
<%@ Register assembly="Infragistics35.Web.v10.2, Version=10.2.20102.1011, Culture=neutral, PublicKeyToken=7dd5c3163f2cd0cb"
[code]....
I said, this works fine. If I use a Register directive that points to the SliderUserControl.ascx source then I can use it on my page and it works.However, I actually need three different kind of sliders, each slightly different from this 'base' slider. For example, one will work with integers, another will work with float point values, etc. So what I want to do is create three classes that inherit SliderUserControl, and customize it from there. So, for example, a slider that goes from 1 to 11 with only one label (without the extra second label on the right) could look like this:
vb.net Code:
Imports Infragistics.Web.UI.EditorControls
Namespace Controls
[code]....
And now I'm a little stuck... I can build this project, but the NormalSlider control does not show up in the toolbox as I'm used to from windows forms projects. I thought well, that's probably different for ASP.NET, but then I remembered that it DOES work for a different control. I have a class Grid that inherits a third party UltraWebGrid control:
vb.net Code:
Imports Infragistics.WebUI.UltraWebGrid
Namespace Controls
Public Class Grid
Inherits Infragistics.WebUI.UltraWebGrid.UltraWebGrid
'...
End Class
End Namespace
When I build the project now, the Grid control does show up in the toolbox! So that's a bit strange..However, I googled the problem of course and I figured out how to get a custom control (class inheriting a control) onto a page, and apparently I can use another Register directive where I need to specify the Assembly and the Namespace. As far as I know, the Assembly is just the current project (the control is not in a separate project) called F1TimeTrials, and the Namespace is either Controls or F1TimeTrials.Controls. So I tried both of those, for example:
asp Code:
<%@ Register TagPrefix="uc" Assembly="F1TimeTrials" Namespace="F1TimeTrials.Controls" %>
Now, I can type "<uc:" and Intellisense shows me the NormalSlider control. Great! However, when I place it on the page, it does not show up during design-time.
asp Code:
<%@ Page Title="" Language="vb" AutoEventWireup="false" MasterPageFile="~/Site.Master" CodeBehind="SliderTest.aspx.vb" Inherits="F1TimeTrials.SliderTest" %>
<%@ Register TagPrefix="uc" Assembly="F1TimeTrials" Namespace="F1TimeTrials.Controls" %>
[code]....
There are no warnings or errors or anything, but the control isn't there.When I run the project, it throws a null-reference exception in the Page_Load event of the NormalSlider class. Apparently, Slider (= the WebSlider third party control on the base class) is Nothing. I don't get it... How can it be Nothing in the Page_Load event? Should I call some method that creates the control in the base-class first?
I've realised that the custom controls that I add to the toolbox are lost on restart of Visual Studio 2010 RC 1.Was there a problem that occured during the installation or is it a know bug?I did not encounter this problem with the beta 2.
View 1 RepliesI create a customtoolbox mainly one that contains the AJAX toolbox control kit as soon as I choose items and select OK the tab just disappears.
View 1 RepliesI would like to ask about two points:
1-how can we make installtion CD for web app.
2-I have seen some of web app. runs as windows app environment so how can we make that?
How do I display the Toolbox? I've looked under every menu item and just don't see it.
View 1 RepliesI already have VS 2010 in Windows 7. If I install virtual PC to run XP, do I need to install VS 2010 again?
View 3 RepliesMy previous development PC was running Windows Vista Home Premium 32-bit and Visual Web Developer 2008 Express. My new PC has Windows 7 Home Premium 64-bit and Visual Web Developer 2010 Express. My Solution contains 3 projects. The Solution has been converted from VWD 2008 to 2010 fine. There are no errors when I build either of the projects. One of them is not working though. When I start debugging, my default browser does not open (problem 1). When I browse the the website manually, pages of that specific project
View 6 RepliesI am working on Windows XP SP3 with VS 2008 Team System SP1. I installed VS 2010 Professional Beta 2. Although the installation reported a success, it also reported a failure of installation of Silverlight. I created a console applicaiton test project in 2010 and just tried to write Console.Writeline. But when I try to type "Console." it did not show me the intellisense. When I press "Ctrl+SpaceBar" it displays me the options correctly. Is there an issue with the installation or i have to change some options to enable intellisense.
View 2 Repliesi have been using microsoft visual studio for last 90 days and now the trial run has been expired, i uninstall everything and install everything back but it give me the same eror which is the trial run for micrososoft has been expired and asks for a products key..does anybody knows what can i do?
View 2 RepliesI installed Visual Studio 2010 Professional using custom settings and decided not to install SQLEXPRESS. The reason being is that I already have an instance of SQL Server 2005 Developer. Now, when I try to use ASP.NET Configuration (Security Tab), I receive an "unable to connect to Sql Server database" error.
View 1 RepliesI'm in the process of rebuilding a computer and have upgraded to Windows 7. I went to download VWD 2008 and find I can only get 2010. Will this be compatable with sql Server 2005 developer???
View 2 Repliesi was working ajax auto completeextender witha text box in asp.net and c#.net. i am not able to get list to choose ,i have the appropriate web service method called..
<form id="form1" runat="server">
<asp:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server">
</asp:ToolkitScriptManager>
<div>
[Code]....
I need to create a Web Setup project for an MVC2 application I made at home, since I have VS 2010 there and I need to show people at the office, who have VS 2008 + sp1 + MVC2.
View 3 RepliesI just decided to add 2010 express onto my work computer to run along side 3.5. The install was fine but when you go to click "Obtain a registration key online" after opening visual studio it takes you to a microsoft page that errors out before loading.
View 6 Replies
