I am using VS2008 under WINXP, I have a project which the ASP.NET version is set to 3.5.
The code: Response.Write(System.Environment.Version.ToString) prints out 2.0.50727.3603
After checking in http://en.wikipedia.org/wiki/List_of_.NET_Framework_versions I found out that the ASP.NET version is 2.0 SP2.
How can I set my project to ASP.NET 3.5 ?
Ive got to go back to an old web application project done in VS 2003. I know 2005 will convert it, but I've never had a lot of success with it, so I'd rather just stay in 2003 for this minor change. Anyway, my original system that I did this work on has changed too much and IIS isn't working anymore, so I decided to use an older laptop that I had just recently refreshed with XP Pro SP3. After installing IIS (and the front page extensions) then installing VS 2003, IIS refuses to work right. Any attempt to access it yields a security error. I havent even loaded my project on this machine yet, so this is a straight IIS problem.
Specifically, any access to localhost results in a login dialog being displayed for which no valid login will work. Once I cancel, I get a 402.1 error.
HTTP 401.2 - Unauthorized: Logon failed due to server configuration Internet Information Services Here are a few things I've tried.
I ran asp_regiis -i from the 1.1 and 2.0 framework directories.
Reset iis a few times with iisreset
Altered the security settings on the inetpub directory. previously some users did not have any permissions, and the ASPNET and IUSR accounts were not added. I added them and gave any user in the list Read/Execute permissions.
I know the error is very vague, but thats what makes it so annoying. I'm drawing blanks and the only thing I can think of is that SP3 just doesn't work with 2003 any longer. I'm building a VM with a brand new SP3 install to try again and another with SP2 as we speak to see if I have any better success.
I am trying to install Visual Studio 2008 on Windows 7, when I run setup.exe I got following error, Visual Studio Setup Launcher has stopped working..
View 3 RepliesSo bit the bullet and installed vs2010 finally. However, when loading an existing vs2008 project, I am getting this error: "The project type is not supported by this installation." the only thing special about this project is that it's a "web application projects" type. what I've tried so far are these steps, but none of these solve my problem:
(1) run "devenv /setup"
(2) regsvr32.exe "%ProgramFiles%Microsoft Visual Studio 10.0Common7IDEProjectAggregator.dll"
I upgraded my vs2005 web application to vs2008, after i run the upgrade wizard,It l pop up one error which says that .net framework 2.0 is not available. I can compile the upgraded project but can not run that. I am wondering where in IIS, I can point the project to framework 3.0?
I ran the project, it had the following error,
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. review the following URL and make sure that it is spelled correctly.
Requested URL: /XX/yy.asmx
Version Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4955
the project was upgraged to vs2008, i am not sure why it still points to v2.0. Also i looked at the project file, I already upgraded the oracle data access dll(from oracle side) to higher version, it also points to the old version.
The other issue is when i open the Solution, It prompted me to create the virtual diectory: Http://localhost/XX, I clicked yes, will the vitually directory automatically generated? If i go to the view sites/add vitual directory, if i enter VeroValueXmllister, will it automatically generate the Virtually directory? Http://localhost/XX
My question is let's say I have "MS Windows Server 2003 R2 with IIS v6".And in this server, I have .Net Framework 1.0 (For my VS2003 Web Sites),
.Net Framework 1.1 (For my VS2005 Web Sites) and .Net Framework 2.0 (For my VS2005 Web Sites).And now I have a web project written in VS2008 with framework 3.5. And I'm planning to put this project in this local server (as Intranet site).
I think I did something stupid recently. I tried out the new vs2010 and probably changed settings to the newer version of the .net framework. My asp.net pages are working normally as before locally on my machine, but after I uploaded my web.config file to my ISP, the same pages are not working online.The version of asp.net my ISP has is 2.00.50727. I can upgrade that to 3.0 for an addional cost, but how do I revert back to my previous version, is this done in the wetb.config file perhaps?
View 3 Repliesi have created a pluIn(setup) for IE. this plugin add in IE addOns.this pluIn(setup) installation and uninstallation is working perfect. now i want use a webservise that check version of my computer plugin and server computer plugIn(setup).if both version are different then ask for updation of PlugIn(setUp).if i click on yes then it update my end PlugIn(setup).
View 1 RepliesI need to migrate a ASP.NET application from 1.1 to 3.5. I have gone through the answers on this forum already, but still have some questions
should I convert the application from 1.1 to 3.5 directly? OR convert it to 2.0 first and then to 3.5 and the reasons for doing so.Is there any article that walks through the whole conversion process from 1.1 to 3.5 with solutions for any typical issues encountered during the conversion process?Is it possible to convert a ASP.NET 1.1 project to ASP.NET 2.0 using VS2008 OR do I need to use VS2005 IDE for doing so?
I have an ASP.NET project and want to include an XML file inside the project to store some relatively static data. To do this I selected "Add File" from the solution context menu and picked my XML file. Having added this to my project, I then wanted to load the XML from within code. I tried the following:
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load("MyData.xml");
I also tried:
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load("~/MyData.xml");
But it seems to be looking in the current directory (i.e. my VS2008 directory) and not the project. Am I going about this wrongly? Is there a way to simply reference a resource that's embedded in the project like this?
I am having trouble installing SQL Server on my system ... it appears to install ok but when I try to connect it using Visual Web Developer Express 2008 it will not connect and mentions something about versions. I downloaded the Northwind database to carry on with the tutorials .. this also asked me to download the MS SQL 2000 version which I tried and this also did not work, other versions include 2005 and 2008. When I tried to open the program through the programs file from "Start Menu" only the configuration manager folder is there.
I have also tried to install the trial version from the website but to no avail. Each time I have restored to factory settings on my laptop and it still fails to connect. I notice that when I restore to factory settings there are loads of icons where the uninstall window lists all of the programs and there is still SQL Server 2008, lots of Icons. I think that version 2008 came with the laptop as it is a business sony vaio sr vgn-sr46gd model with vista business.
I need to uplaod photo in my VS2008 project. Can I use FileUpload control or link button is the better option. Also, how to do the upload using both controls.
View 13 RepliesIs there a difference between the Web Setup Project in VS2008 and the Web Deployment Project that I keep reading about on this site? More importantly, how much of a help is the deployment project over just using the setup project?
View 1 RepliesI have a vs2005 web application project,I upgraded my machine from xp to Windows 7, the web application project not working in vs2005 anymore, does anybody know why windows 7 not support web application project for vs2005? if i upgrade vs2005 web application project to vs2008, will that work in windows 7? and after upgrade, will the original web application project still a web application project or it upgrade to website project?
View 3 RepliesI have been working on this project for a few months in VS2008.. now that we are getting closer to the end, one of the other programmers has been working and doing his in VS2010, so when i try to open his projects in VS2008 it just shows up as XML.. so i have to open in VS2010.. thats fine..
But if i try to open my project in 2010, it prompts to use the conversion wizard.. Should i be concerned or are there any issues with doing the conversion? Being the end of the project, i dont want to cause issues at this point.. So would like to know if converting the project file at this stage in our project a good idea? Will there be any issues using his code with mine since they were developed in 2 different versions..
I have a vs2008 Website project(it was converted from vs2005), when i right click the Website node in the solution and open the property page, i select the references link, then click add reference to Oracle.DataAccess.dll(11g, 64bits), Version=2.112.2.0 in the website BIN directory, it doesn't work, i don't see the Oracle.DataAccess.dll is added, Can you give me any advice why the website project can not add the Oracle.DataAccess.dll ? And I can add rOracle.DataAccess.dll to my other Web Application project, what difference between Website project and Web applicatoin project caused the issue? Since i can not add the Oracle.DataAccess.dll , when i compile, it gave the error:
Could not load file or assembly 'Oracle.DataAccess, Version=2.112.2.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. An attempt was made to load a program with an incorrect format.
F5 builds the web project and the opens the web site but the project is not in debug.
This has happened over the last week but I was not aware of making any relavent configuration changes or updates.
I am working on the migration of the server. Our new server is Windows server 2008 with IIS7.0 I have a great difficulty in browsing the pages hosted in virtual directories. I have followed the proper steps of creating a virtual directories and converting them into applications. But when i try to browsing the pages of the virtual directory, i get the 404 error. Note: The .Net Framework 4.0 is installed on the server and the web applications which i am trying to configure in the virtual directories are developed in Visual Studio 3.0. Even the http://localhost also don't work.
View 9 RepliesI created an MVC project in vs2010 RC and i cant really tell if its running on MVC 2 Beta or the freshly released MVC Release. Is there anything i can look out for to determine this?
View 12 RepliesI have an ASP.Net project created by a team member on another computer. The project references a virtual directory that exists on my computer but under a different localhost location.Currently, the following error occurs when I try to open the project:
The local IIS URL http://localhost/foo/default.aspx specified for Web project foobar has not been configured. In order to open this project the virtual directory needs to be configured. Would you like to create the virtual directory now?[Yes] [No]
So, there are two options: select yes: It creates the virtual directory that it thinks I need, which I don't want to do. I already have a virtual directory somewhere else.
select no: This isn't an option, as the project opens, but without all the bells and whistles I know and love.
Where is the virtual directory location (in my case http://localhost/foo/default.aspx) specified within the project? Can I change this manually, say in a configuration file within the project, either before or after I open it? A configuration change seems more ideal than manually opening IIS to override a virtual directory path.
EDIT (solution): Buried in the comments below is the following answer (Thanks @Thyamine)This can be configured in the foo.csproj file for the project. Look for the lines:
<ProjectExtensions>
<VisualStudio>
<FlavorProperties GUID="{F00-000-000}"> [code]....
i'm working on a project (ASP.NET). When i run my project it runs on IE6 because i'm using windows xp. I want to run it on other browsers like firefox, opera etc. can any one tell me how to do this. I've set the default browser as opera frm control panel but it didn't worked.
View 3 RepliesI am developing asp.net web application on visual studio 10. I want to move this project to another machine running visual studio 10. I have databases and style sheets with my project. Whats the best way to copy this project to another machine preserving all dependencies.
View 2 Repliesi installed windows 7 and visual studio 2008 and sql server 2005 Now when I run my web projects, internet explorer opens but it says "internet explorer can not display the webpage", albeit when I put only "http://localhost" in browser it displays a page with iis picture.firefox didn't work when i had windows XP this problem never occurred.
View 10 Replieswhen i install the setup ,i want to install whereever i want That means ,i want to browse the mycomputer folders
View 2 RepliesI am having a silly beginners problem with ASP.Net/Visual Studio 2010. I would like to integrate a number of third party packages into my asp.net MVC app (e.g. CKEditor, TinyMCE.) During the prepwork I sooner or later end with instructions to the order of "copy the package into your project/scripts directory". Sounds easy but I still can't figure out how to do it.
For the time being I trick visual studio into adding the package by adding a blank directory, then go to windows exporer to copy files into the directory, then go back to visual studio to add them one by one. That works for a few javascripts but not for a more complex package. Clearly there must be a better way to add a third-party hierarchical structure to a project, right?